If we disable the hearbeat source after enabling the watchdog there's no
more lock-up when powering off the dap
Comment out alarm enabling on startup since rockbox disables the alarm anyway
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26247 a1c6a512-1295-4272-9138-f99709370657
A specific poweroff function needs to be used for wake-up to work
Disable RTC in bootloaders for consistency with other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26243 a1c6a512-1295-4272-9138-f99709370657
- fix check_event_queue to use queue_peek and not mess message order
- change check_dircache_state to a more modest check to avoid messing up dircache state
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26228 a1c6a512-1295-4272-9138-f99709370657
Charge using 150mA current like the OF to charge faster
Edit clipv2 charging curve with 150mA
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26227 a1c6a512-1295-4272-9138-f99709370657
Move code not defined for bootloader under a single preprocessor check
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26219 a1c6a512-1295-4272-9138-f99709370657
GPIO direction needs only to be set at init
both functions are now one liners so make them static inline
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26218 a1c6a512-1295-4272-9138-f99709370657
It seems there is some significant variance between different greyscale ipods of the same model, so it's unlikely that *any* value will be great for everyone. I'm hoping that this is just high enough that the lightest screens aren't totally blank, but not dark enough that the darkest screens are entirely unreadably black ;)
This rather unsatisfactory compromise is to help us get a new bootloader release out (since bootloaders can't have their contrast adjusted) - a real fix would be to detect the LCD type, which the OF appears to be able to do (maybe).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26208 a1c6a512-1295-4272-9138-f99709370657
- forgot a ccu undocumented thing in init
- finish init code (following linux patch)
- enable interrupts
- don't use dynanmic fifo sizing by default
- move to a more static configuration of usb hardware parameters (it might be necessary to move them to config* files later).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26195 a1c6a512-1295-4272-9138-f99709370657
it might be valid C but is confusing, and not consistent with the rest of file.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26191 a1c6a512-1295-4272-9138-f99709370657
we still need to convert uncached addresses to physical addresses
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26177 a1c6a512-1295-4272-9138-f99709370657
No need for special address handling, all addresses are equal to their physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26176 a1c6a512-1295-4272-9138-f99709370657
- enhance registers description in header file with respect to the as3543
registers: point which one are present or not in the as3543, which bits
change (i didn't detail all registers)
- cache less registers, only up to the ones which are written to
multiple times
- use ascodec_readbytes() to cache all needed registers in a row
- separate the as3543 bits from as3514/as3515 in audiohw_preinit()
- comment out unused audiohw_set_lineout_vol
- some cosmetics
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26174 a1c6a512-1295-4272-9138-f99709370657
it's only needed if we hotswap the µSD or if we build the fuzev2
scrollwheel code without irq (which we don't do anyway)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26165 a1c6a512-1295-4272-9138-f99709370657
test_disk doesn't freeze anymore when closing the file between writing & reading
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26164 a1c6a512-1295-4272-9138-f99709370657
