On devices that can assign interrupt IN, bulk IN and bulk OUT endpoints
this change results in the serial interface working out of the box on
Linux and Windows. On Linux it is registered as ttyACM device and on
Windows it is assigned a COM port number.
On devices that cannot assign the interrupt IN this change won't have
any effect.
Implement minimum required interface control requests. Respond with
whatever line coding was set to make terminal programs happy.
Change-Id: Id7d3899d8546e45d7cb4ecc3fe464908cb59e810
Based on g#844 and g#949, it is intended as a replacement for the
current s3c6400x USB driver.
The DesignWare USB OTG core is integrated into many SoC's, however
HW core version and capabilities (mainly DMA mode, Tx FIFO mode,
FIFO size and number of available IN/OUT endpoins) may differ:
CPU targets HW ver DMA NPTX FIFO FIFO sz #IN/OUT
-------- ------------- ------ --- --------- ------- -------
as3525v2 sansaclipplus 2.60a Yes Dedicated 0x535 4/4
sansaclipv2
sansaclipzip
sansafuzev2
s5l8701 ipodnano2g 2.20a Yes Shared 0x500 4/5
s5l8702 ipod6g 2.60a Yes Dedicated 0x820 7/7
ipodnano3g
s5l8720 ipodnano4g ? ? ? ? ?
Functionality supported by this driver:
- Device mode, compatible with USB 1.1/2.0 hosts.
- Shared FIFO (USB_DW_SHARED_FIFO) or dedicated FIFOs.
- No DMA (USB_DW_ARCH_SLAVE) or internal DMA mode.
- Concurrent transfers: control, bulk (usb_storage, usb_serial) and
interrupt (usb_hid).
Actually this driver is not used by any CPU, it will be enabled for
each individual CPU/target in next patches.
Change-Id: I74a1e836d18927a31f6977d71115fb442477dd5f
Also enable HID, and use that as the dummy class instead of charging-only for controllers that have working interrupt transfers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21053 a1c6a512-1295-4272-9138-f99709370657
This needs support for usb interrupt transfers, so there are some changes in various USB drivers as well (only usb-drv-arc supports it at this point, others won't have working HID yet).
HID is disabled for now, as the apps/ part is not included yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20962 a1c6a512-1295-4272-9138-f99709370657
Still not enabled by default, #define USE_ROCKBOX_USB is still required to enable it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16360 a1c6a512-1295-4272-9138-f99709370657
0) change relevant defines in usb_core.c
1) modprobe usbserial vendor=0x0781 product=0x7421 debug=1
2) picocom /dev/ttyUSB0
3) look at your logf screen if you build with logf support and enabled LOGF_ENABLE define in usb_serial.c
I also modified usb_core so that storage and serial both can make use the the 'usb_core'-thread. More will come :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15850 a1c6a512-1295-4272-9138-f99709370657
