If I'm interpreting the git history correctly,
the config file for Zen Vision was at some point
inadvertently replaced with one for the
Zen Vision:M.
This deletes the currently unused creativezv.h,
and moves its contents into zenvision.h.
The config files appear to be identical except for
CREATIVE_ZV vs CREATIVE_ZVM define, different
keypads (CREATIVEZVM_PAD vs CREATIVEZV_PAD) and
BOOTFILE_EXT (zv vs zvm), a different model name
and number, as well as different LCD dimensions
and DPI.
The buttonmap still seems to require adjustment.
Change-Id: I9a5e65df750db21be5f5a1ed7a80a50706237781
The s5l8702's ATA controller can only DMA in/out of cacheline-
aligned buffers. The more general buffering code already ensures
its buffers are aligned, but this covers the rest of the
users of the general I/O path.
Change-Id: Iae54d98797efb61756cb73e3901308775a0c5e52
- NOR flash size is 1MB, not 10MB
- BOOTFILE_EXT2 is not used, the Rockbox binary is always unencrypted on iPod 6G. This looks like a leftover from ipodnano2g config
Change-Id: Iea76c1e87f27e25b3d59924ef02e22d91448e39d
Support hw4 units with AXP2101 PMU
Bootloader successfully compiles and loads onto device.
The LCD appears to be identical to hw3 units.
Scroll wheel and buttons work
Audio output works, including volume.
HP/LO detect works
Rockbox build is generic
GPIO gating logic seems to be working as intended now.
- Added new GPIO definitions - some significant overlaps with pins
from previous hardware revisions...
- Added some GPIO definitions for older players we didn't know about
- Add register definitions for AXP2101 from datasheet
(these are very different from AXP192!)
- Add AXP2101 regulator definitions, need to support multiple step
sizes per regulator.
- Verify AXP2101 voltage set multi-range logic
- Verify AXP2101 voltage get multi-range logic
- Make AXP2101 its own driver
- AXP2101 driver should be "minimally viable", though I think
there is some extra functionality that could be implemented.
- Disabling the coulomb counter stuff - we could maybe make
the E-Gauge work for the same purpose, but it only appears to
be used on the debug screen at the moment so it doesn't seem
like it's worth the effort.
- Found new button GPIOs
- Found error in my GPIO setting logic, blue light works now!
- Set LDO/DCDC output voltages to OF's settings, as far as
I can tell.
- Determined we probably want TCS1421_CFG1:0 to be 0x00,
for UFP behavior
- Tested this rb build with both old and new bootloaders on hw1.5,
hw2, hw4 in as many configurations as I can think of, works across
the board.
- Bootloader can install itself on hw4, so nand chip isn't novel
- Uninstallation file can be made by patcher script, works on hw4
- Installation file can be made by patcher script, works on hw4
- Added HW4 to rbutil, manual
Change-Id: I5b75782273e81c2c6f2b9c79501c8b7cbf88391f
Currently only S5L8701 (Nano 2G) and S5L8702 (Classic/6G, Nano 3G) are defined. This change adds the remaining to CONFIG_CPU, as a preparation for porting to these platforms. It also defines the RTC types for Nano 3G and Nano 4G.
New CONFIG_CPU options:
S5L8720 - iPod Nano 4G
S5L8730 - iPod Nano 5G
S5L8723 - iPod Nano 6G
S5L8760 - iPod Nano 7G
Change-Id: I4e9e00163c0d0d5a5303f9eee428f9be47a48359
These are PP502x-based devices shipped with ATA drives. However,
PIO is flaky when used with the various ATA/CF<->SD adapters, so
turn it in across the board.
Change-Id: I65384d95e2e4498eb03f43ac990b01e0c6d060c5
This way if there's no valid partition/filesystem we still report the
"correct" sector size out via USB.
Update the ipod5g/6g bootloaders so they do the right thing too.
Change-Id: I0d93ae7e6664f1591d8edf1c0252c586e329cd4b
When enabled this allows 512n and 4Kn drives to be used with a single build.
(So far all ATA SSDs use 512 byte logical sectors)
Change-Id: I902d2318ca8abb581699c0bca68d6e3ec227d064
This lets us *natively* handle varying physical sector sizes
without playing games and lying about the logical sector size.
(The original drives use 4K _physical_ sectors with 512B logical
sectors, but you have to access everything in 4K blocks...)
Achieve this by splitting the MAX_PHYS_SECTOR_SIZE code out
of the main ATA driver and re-using it.
Change-Id: I0bc615ab4562f1e3e83171a8633c74fb60c7da1f
ipod6g was configured with SECTOR_SIZE of 4096, but this ATA driver
unconditionally translated these to 512B operations on the actual
storage device.
Rockbox's storage layer already has robust support for "logical sectors
larger than physical storage sectors" through use of
MAX_LOG_SECTOR_SIZE. So switch to that mechanism, allowing the ipod6g
ATA driver to be simplified.
If we want to support drives with physical sector sizes > 512B, then
we need to port the MAX_PHYS_SECTOR_SIZE logic from the primary ATA driver.
Additional changes:
* Simplify MWDMA/UDMA selection logic
* Report CE-ATA mode in debug menu
* Use LBA48 commands only if drive is over 128GiB.
* Drop default sleep/poweroff time from 20s to 7s (matching main ATA driver)
Finally, the bulk of the changes are the first phase of a badly needed
style cleanup that made reading this driver a lot harder than it should
be. I intend to split this into a separate patch.
Change-Id: I2feca9fd319c8d6cfb3c2610208970428d2fa947
bootloader passes the player version to rockbox for LCD init changes
Credit ZappBranigan2972 on forums for original changes
Credit Bilgus for devicedata additions
Change-Id: Ia2ca493edef49b7457e84dc19b05397dc915fa5a
Notably:
* double-paste in ihifi760 config.h
* jz4740 ATA & SD drivers used MULTIVOLUME instead of MULTIDRIVE
* Simulators implicitly rely on HAVE_HOTSWAP
Change-Id: I44fc7f98f0f6df366f016567c330f87e9f3ca6a6
* HAVE_MULTIDRIVE implies HAVE_MULTIVOLUME as the latter is always
removeable storage
* SD storage implies MULTIVOLUME
* ATA storage (with HAVE_LBA48) implies MULTIVOLUME
* Replace HAVE_MULTIDRIVE && NUM_DRIVES == 1 with HAVE_MULTIVOLUME
Since SD and ATA can exceed 2TB, we need multiple volumes to fully
utilize available storage with FAT32.
In practice I believe this only affects the ipod devices.
Change-Id: Ia597770948b0e2b47630f7264ad34f225a33a640
Status:
- tested on:
Samsung YH920 - it uses this detection too, it always should have
the radio.
Samsung YH925 with the radio.
- untested on:
Samsung YH925 without the radio.
Change-Id: I68b39c09d6b7e26a4c373fbd8bf9401a97e86123
Max allowed size: 120860
Old thumb build: 128494
New thumb build: 118514 (fits!)
Disabled:
Logo;
alpha blending capabilities for bitmaps;
Arm stack unwinder (backtrace);
Related forum discussion: https://forums.rockbox.org/index.php/topic,54768.0.html
Fixes FS#12380
Change-Id: I978720d795cb0ef5169103e467cf8386c21d8e93
The standard load_firmware() function is used on targets which
use the "scramble -add" method for generating Rockbox binaries.
While it tries to be a bit more generic and allows the CRC/data
offsets to be placed anywhere in the file, there are no targets
which actually need this flexibility, because they are all using
plain old "scramble -add".
So we can actually simplify load_firmware() and remove defines
from the target headers. All the targets used CRC offset = 0 and
data offset = 8, except for a few which I assume never supported
ROLO or were never tested -- eg. samsungyh820: the CRC and data
offsets cannot both be 0.
The actual motivation for this is removing the calls to lseek(),
which can help make bootloaders a tiny bit smaller, as lseek is
typically not used anywhere else in bootloaders.
Change-Id: Ic2d01e5b75a32e88363f085e3e839146a0710bf4
Unifies codec size with most targets.
Apart from other things increased size improves seek accuracy in long m4b audiobooks.
Tested on Agptek Rocker and XDuoo X3II
Related discussion: https://www.rockbox.org/tracker/task/13049#comment44591
Change-Id: Id246969e78386b71ac66aace128cfba72a3f209e
fiio m3k native is currently the only player with
defined buttons different from the standard
mapping.
This allows the user to use the keyremap plugin
to specify differing keymaps for their device in the locked state
Change-Id: Ie0b447bba0d5978e8d23fed423df30c794afc6f9
Add context flags to keyremap
CONTEXT_LOCKED
CONTEXT_REMOTE
CONTEXT_REMOTE_LOCKED
--CONTEXT_PLUGIN-- Removed -- Plugins need a custom action list
supplied and a method of supplying them
Change-Id: I5201d275ad0ab6130c2d05d5afb0c450f5c1746c
This was only enabled for the mrobe500 and sansaconnect targets.
Most targets are therefore running without this "safety" measure,
and presumably we'd have noticed long ago if there was a problem.
So in all likelihood this is just a bunch of dead code that we
don't need to carry around.
Change-Id: I7d27701a38b1c2a985ee73fa6f277ad215d8d385
The iPod classic/6G comes with 64MB of RAM. This
brings it in line with the plugin buffer size of some
other targets that have the same amount of RAM,
such as the Fiio M3K, and enables the use of
PictureFlow for users with very large databases.
Change-Id: I1ccae1cacda7a243139f4887f54bd35cc8e501cf
Enables multiboot for the FiiO M3K, Shanling Q1, and Eros Q native port.
Note this requires an up-to-date Rockbox _and_ bootloader.
Usage instructions will (eventually) be found on the wiki:
https://www.rockbox.org/wiki/MultibootBootloader
Change-Id: Ia2da1ad6ef611e499d2fbafa93838387bc1023ba
Searching in volume 0 is necessary for multiboot targets with only
one drive, like the M3K/Q1/ErosQ. Without this the search code will
never look at the redirect file on these targets.
The search bound is configured with a setting MULTIBOOT_MIN_VOLUME,
which defaults to 0, but is defined to 1 for Sansa players so they
keep their old behavior.
Change-Id: I6dc5cf98db4258731de2c68c3ab1182b4a4a655b
Screenshots of the recovery menu will be useful for documentation.
This can be disabled by turning off HAVE_BOOTLOADER_SCREENDUMP in
the target config file if the bootloader should ever run up against
max size limits.
Change-Id: I62ec1e465df2ca7a8a0e78625d88b31f6c4ef078
This kind of reverts 7b596416bf ("Gigabeat S: Update RDS processing to
use asynchronous I2C rather than thread."). However, requiring RDS to
run in thread context will a) allow more upcoming features and b) remove
quite some complexity from the codebase (see the diffstat here) because
Gigabeat is the only user. iMX31 should be able to handle one more
thread, as it can even run Linux.
Change-Id: I46130034595ba66392c5417c275d036f4bd26943
This controls the playback volume, which is not useful for
the M3K because it's impossible to play back and record at
the same time.
Change-Id: I5b0931c22b484f3ff6441d6c88079f18ec70f7f8
Recording works now, although I'm sure there will be a few
things that need fine-tuning. A major issue is that writing
to the SD card creates noticable interference, which happens
on the original firmware too but seems worse under Rockbox.
(Since Rockbox waits until RAM fills up before writing data,
the interference will only be heard on >50 MiB recordings.)
Change-Id: I5561dd9668c3bdd34e92f34ef50848aef8c0b7eb
This problem actually had nothing to do with USB boot; it's
because the cable is plugged in when the USB mode menu item
is selected. The USB thread detected the select button press
and went into charge-only mode (as it usually does when you
hold down a key in Rockbox). This is fixed by having the USB
thread ignore most keys in the bootloader.
USB connect events are delivered via the button queue, and
there were also cases where the connection could be missed
if the event happened within another UI screen. This should
also be fixed.
Change-Id: I077d705a6ac845c8713219eee45d26aa6addfa61
This allows battery run time to be calculated from the
actual battery usage on the FiiO M3K and Shanling Q1.
This isn't very good for the time being and the estimate
tends to go all over the place due to small variations
in current or voltage.
The Eros Q can support this feature as well, but since
it already has fixed estimates defined and the quality
of the "real time" estimate is low I am not enabling it
there.
Change-Id: Id34a93ee4b7d66f9f7e56ef0f5149f67e8e72039
Create a new battery_current() function to report the
the battery's charging/discharging current. Move the
old runcurrent() implementation into it and clean up
some of the related defines.
Change-Id: I7dbe5b6532d291fa72add1cb23b30e3cbac8c3ca
