check file_exist(PITCH_CFG_FILE)
close fd when finished
If you already have a setting saved and you reenter the pitch plugin
with differing pitch settings you will be asked to restore your
default settings
update manual entry to be a clearer
Change-Id: Iaaaf08983a355f9848412d1c6b0bba25d6ea8f39
Support hw4 units with AXP2101 PMU
Bootloader successfully compiles and loads onto device.
The LCD appears to be identical to hw3 units.
Scroll wheel and buttons work
Audio output works, including volume.
HP/LO detect works
Rockbox build is generic
GPIO gating logic seems to be working as intended now.
- Added new GPIO definitions - some significant overlaps with pins
from previous hardware revisions...
- Added some GPIO definitions for older players we didn't know about
- Add register definitions for AXP2101 from datasheet
(these are very different from AXP192!)
- Add AXP2101 regulator definitions, need to support multiple step
sizes per regulator.
- Verify AXP2101 voltage set multi-range logic
- Verify AXP2101 voltage get multi-range logic
- Make AXP2101 its own driver
- AXP2101 driver should be "minimally viable", though I think
there is some extra functionality that could be implemented.
- Disabling the coulomb counter stuff - we could maybe make
the E-Gauge work for the same purpose, but it only appears to
be used on the debug screen at the moment so it doesn't seem
like it's worth the effort.
- Found new button GPIOs
- Found error in my GPIO setting logic, blue light works now!
- Set LDO/DCDC output voltages to OF's settings, as far as
I can tell.
- Determined we probably want TCS1421_CFG1:0 to be 0x00,
for UFP behavior
- Tested this rb build with both old and new bootloaders on hw1.5,
hw2, hw4 in as many configurations as I can think of, works across
the board.
- Bootloader can install itself on hw4, so nand chip isn't novel
- Uninstallation file can be made by patcher script, works on hw4
- Installation file can be made by patcher script, works on hw4
- Added HW4 to rbutil, manual
Change-Id: I5b75782273e81c2c6f2b9c79501c8b7cbf88391f
This improvement brings a huge performance improvement to start a random mix of your library. Previously, the only way to do this was to increase the size of a playlist with absurd sizes number. Now it will respect the limitation but will insert random songs from the current view.
Database: Add true random songs in playlist if it is gonna exceed its maximum capacity
More context is available here : https://www.reddit.com/r/rockbox/comments/1ez0mq4/i_developped_true_full_library_shuffle_for/
Also :
- Improved layout in the DB browser
- New default max playlists capacity is now 2000 on old PortalPlayer targets to give a better user experience and not having to wait dozens of seconds while creating a playlist
- "Show insert shuffled" option is now true by default
- Add a new shortcut to play all songs shuffled in the DB browser
- Now the feature is fully optional and enabled only on targets that have more than 2MB of RAM
- Add entries about this feature in the manual to explain it to the users
Change-Id: I1aebaf7ebcff2bf907080f1861027d530619097c
Change-Id: I3354923b148eeef1975171990e814a1a505d1df0
Instead of hiding this option when the current playlist
is unsaved, we can offer to save the playlist, if
necessary, before attempting to create a bookmark.
This simplifies the workflow by getting rid of steps 1
and 2 that a user currently needs to perform:
1) Open context menu, check if "Create Bookmark" option
is available
2) If not: Re-open context menu. Select Current Playlist
-> Save Current Playlist
3) Re-open context menu. Select Bookmarks
-> Create Bookmark
Change-Id: Ia9fb5f9db95e2fcbde03470a3c3745824424a339
The database or playlist catalogue can now be set
as the browser that is launched when pressing
ACTION_WPS_BROWSE on the WPS, unless another browser
has more recently been opened.
Previously you'd always have to exit the File Browser
first, after the player had been restarted, which is
annoying for users who prefer the database.
The playlist catalogue has become part of the MRU
browser list, so pressing ACTION_WPS_BROWSE after
selecting a track from a playlist in the playlist
catalogue will now take you back there.
Settings menus have been slightly restructured.
- Eliminated "Set WPS Context Plugin" and "Hotkey" menus
from the General menu
- Added "What's Playing Screen" menu in Settings-General
with option for setting default browser. The "WPS Hotkey"
and "WPS Context Plugin" menu options have been moved to
this menu.
- "File Browser Hotkey" is now part of the File View menu,
which means it is accessible from the browser's context
menu as well.
Overview of resulting menu structure in Settings->General:
What's Playing Screen
Default Browser
WPS Hotkey
Set WPS Context Plugin
File View
(...)
File Browser Hotkey
Change-Id: Iaa3619a791c20ce3562a1efd2cf90c72933b729a
The directory cache and the database's Load to RAM feature
each result in a much better user experience.
But, when both features are enabled at the same time, it
can take a very long time on older players - easily several
minutes for larger libraries - until all of the database's
dircache references have been updated.
Include a 'Quick' option that causes the database to ignore
dircache references which can *significantly* reduce disk
activity after booting.
Change-Id: I25ae779c97d03885b06d5a28d8be55c0d05692a5
The "Reload After Saving" setting was added in
g3347 (4f83e66) to solve FS#13287, by allowing
you to bookmark a modified playlist after saving,
without having to manually reload it first.
Since the rewrite of playlist_save in g5192
(90e3571), a modified playlist doesn't have to be
reloaded anymore in order to be bookmarked after
it's been saved, unless it contains queued tracks.
To cover the remaining use cases of the previously
available option, Rockbox will now offer to remove
any queued tracks from a playlist when saving it.
Change-Id: I2d6f12bcce14d8ff41a4d921ce84d628774103ac
Allow the database path to be set from the file browser's
"Set As" context menu, so it can be changed without editing
the .cfg file by hand.
Change-Id: Ie1a84bcb2084ee3b1a0a18cc51f564238515f164
prints logf messages to the screen buffer and dumps the
output to .rockbox/db_commit_log.txt
logs warnings about tags that can't
be displayed by the current font
adds an option to the tagcache using the file
.rockbox/database_commit.ignore to prevent auto commit
Change-Id: Ib381b3b6d9dd19d76c95d0e87e605f7378e29674
Use action-oriented and more descriptive titles
"Add to Playlist..." instead of "Playlist Catalogue"
- "Add to Existing Playlist" instead of "Add to Playlist"
- "Add to New Playlist" (unchanged)
- "Playing Next..." instead of "Current Playlist"
In WPS context menu:
- "Current Playlist" instead of "Playlist"
Change-Id: I5cce9e317676537988682f46ac6b920598af3b9e
Moves options for configuring:
- Playlist Directory
- Recording Directory
- Start Directory
into a single menu.
Necessary prerequisite for giving the
"Playlist Catalogue" context menu item a title that's a
little more action-oriented ("Add to Playlist…”).
Change-Id: I4ee08fc67d5350c38ae1a57cb345c4ed1082d0b5
'File Browser' hotkeys can now be used while
browsing a playlist.
The manual has been updated to reflect this and
to say that the File Browser hotkey works in
the context of the database as well (existing
behavior)
Change-Id: I51b23e82e0fb00772efdb8784db966d454fb2560
USB ask mode is basically a footgun: it can't work on native targets
and doesn't work reliably on hosted ones, and it continually produces
a slow trickle of problems. FS#13317 gives a rundown of the issues.
Removing the setting seems like the best solution for now, since a fix
would be pretty involved.
This partially reverts 60f581e8f5. The USB Mode setting is left in
place so the option can be added back later in a non-buggy way.
Change-Id: Ie01b28dd2ed95a31b509a7834d85bac8eb866098
* Fix a typo in a URL
* Note how to enter the OF from the bootloader
* Document how to perform a hard reset
Change-Id: I96d0d64cbd251573e1c5c55657ee5c5db510d9a6
It needs screenshots and slightly better installation instructions
Includes bits shared with other HibyOS platforms
Change-Id: I1c1974143b5badf1aca5c3281556ce553ab1b8a5
Includes installation instructions and a description of Rockbox's
limitations versus the original firmware. Some things are still
missing, notably screenshots for the Q1. The M3K image also needs
to be updated to include the 'select' button.
Change-Id: Ib533206df01925203edeccdd75e1bf22f407e794
Keeping in sync with how Rockbox currently works:
- Context menu doesn't include an option to "View Catalogue" anymore
- What used to be the "Playlists" menu is now the context menu of the "Playlist Catalogue"
- Context menu includes an option to "Reset Playlist Catalogue Directory"
Also updated info regarding the "Create Playlist" option.
Change-Id: I717bab9d26a9a08fb95083b67a779541e00a0fd3
The "View" option for playlists/.m3u files is currently part of the "Current Playlist" submenu even though it refers to the selected file/playlist and has nothing to do with the current playlist. It has been relocated to the context menu of the playlist file where it makes more sense and is easier to get to.
Change-Id: I806ed46a7315293d7d20f29ed004cc8ab58cdcb7
The manual has been updated to reflect the fact that the current title of the submenu for adding music in the context menu is "Current Playlist". (The WPS context menu has a different submenu called "Playlist")
Change-Id: I2bbeabad6d24673c46d3322529478c4a7a61ca88
v3: Add in config option
v4: Bugfixes
v5: Force a redraw upon exiting
v6: keypress-in-chargeonly mode enables mass storage (and vice versa)
v7: Fix bootloader builds
v8: Update manual, and have bootloader respect keypresses
v9: Change default to mass storage (ie no change in behavior)
todo:
* test-build dx50/dx90
* Switch from yes/no to proper menu?
* prevent WPS progress bar from drawing over us
Change-Id: I82e0ccb08497b7a5aa756ce77f1332ee963703a7
...
Change-Id: I7946cf240b18a4fa8ace5e25e1eb6e97b8b12d7c
