Unless you had manually resumed the playlist, you
didn't get any warning after Rockbox rebooted, when
replacing a modified current playlist.
Change-Id: Ibc83e3db4e6ee51e94204ac7732760894d2fb602
people don't like having to remember to run the TSR plugin so
lets meet them halfway
all tracks are added with timestamp, elapsed, length, trackname
added buffering for ATA devices
still needed:
-Done -- a plugin that parses for duplicates and reads the track info
to create the actual scrobbler log
(log can be truncated once dumped)
this should allow you to run the plugin at leisure
later I'd like to expand this logging to allow
track culling based on skipped songs..
remove the TSR plugin as hard disk no longer need to use it
Change-Id: Ib0b74b4c868fecb3e4941a8f4b9de7bd8728fe3e
Turns out they did not swap the stereo switch lines on us,
so this setting isn't really useful. Repurpose it to allow
the user to force the device into headphone or line output mode.
Note that settings other than "Automatic" will cause jack detection
to not work.
Default Automatic.
Change-Id: If94499fbb8f0d92111811fe51f6107ce213b66ad
This is a preparation to introduce support for the following SoC models: S5L8720 (iPod Nano 4G, iPod Touch 2G), S5L8730 (iPod Nano 5G), S5L8723 (iPod Nano 6G) and S5L8740 (iPod Nano 7G)
The whole family consists of SoCs which are similar, running ARMv6 and Thumb2 instructions, but some peripherals are located at a different address.
No functional change is to be expected so far.
Change-Id: If1f7669c49cf110ccc52c5234cc42ffd6f2b4e80
cfg_vals aren't needed for most settings
F_TABLE_SETTING, F_CHOICE_SETTING, F_BOOL_SETTING
can use cfg_vals but only a few custom settings use it otherwise
for these settings we define F_HAS_CFGVALS and use the setting union instead (as these all use UNUSED)
noticed that settings_dumper missed most cfg values so didn't show text setting values
saves ~300 bytes
Change-Id: Ie504c8cfe2a6cf471117c3afe5cf9a770a7f1784
Offer new options to show elegantly your entries in any playlist/dynamic playlist viewer. This is especially important if you dual boot an iPod with Stock OS and want to sync with iTunes; with this very popular setup, file names are obfuscated which results in any Rockbox playlist viewer difficult to enjoy, and it was a long standing issue reported by several Rockbox users over the years. The only way to show the title was to open a contextual menu on each song to get infos about the selected song, which is a very long and anti-ergonomic process to understand what is on your current playlist/randomized playlist. The idea of this patch is to provide new alternatives that the user can select. I personally selected the Title & Album view which provides excellent readability.
This patch was built with performance in mind using lazy loading to load one by one the tags then cache a string and use the little cache as much as possible to make scrolling in the same area as smooth as possible. Performance remains very acceptable even on an iPod 4G with its original hard drive. Using a real compact flash with my iPod Mini 2G reduces the latency even more.
Those new options are disabled by default because they impact noticeably the scrolling performance and are less relevant if your files are decently properly named.
Unfortunately, the search feature in a playlist will need to continue to use the raw filename because reading the tags for a whole playlist is a performance disaster. This works decently while viewing just because I made a code that load those one by one as much as possible.
I focused also on testing that the opening of the playlist viewer UI remained fast, and loading one by one with lazy loading allows to get very little overhead in this regard.
Change-Id: I00d9c802e29f8372447813b035bbae207a016467
This option is especially useful for theme creators that want to create themes with lockscreens. When text is scrolling, it is breaking the lockscreen so setting this option to true prevent this. Text will continue to scroll normally in all other contexts.
Change-Id: I194f6837217881d50f567a775b81d0b422caf35c
The idea is that a theme or whatever could use this to provide visual
differentiation (eg "George's iPod") between multiple
otherwise-identical players..
Defaults to an empty string.
Added to the manual but there is not a way to set this through the
menus yet.
Change-Id: I1cff6b19d621dd6207b4b82eed67741ce2da0ef1
Hopefully this should cover our bases so we can change
the behavior of the stereo switch to keep line out working
when they change the hardware on us!
Change-Id: Ic36bcb3778d5681a5f3f158c689df9c1420c1d7e
add sorting directories as files
move picross files to a hidden folder
use directory for lua_scripts, sgt_puzzles
make plugin browser able to handle 1st level directories
Change-Id: I30852d71dc992c378d5790756e94f06f5a2e9bef
The database or playlist catalogue can now be set
as the browser that is launched when pressing
ACTION_WPS_BROWSE on the WPS, unless another browser
has more recently been opened.
Previously you'd always have to exit the File Browser
first, after the player had been restarted, which is
annoying for users who prefer the database.
The playlist catalogue has become part of the MRU
browser list, so pressing ACTION_WPS_BROWSE after
selecting a track from a playlist in the playlist
catalogue will now take you back there.
Settings menus have been slightly restructured.
- Eliminated "Set WPS Context Plugin" and "Hotkey" menus
from the General menu
- Added "What's Playing Screen" menu in Settings-General
with option for setting default browser. The "WPS Hotkey"
and "WPS Context Plugin" menu options have been moved to
this menu.
- "File Browser Hotkey" is now part of the File View menu,
which means it is accessible from the browser's context
menu as well.
Overview of resulting menu structure in Settings->General:
What's Playing Screen
Default Browser
WPS Hotkey
Set WPS Context Plugin
File View
(...)
File Browser Hotkey
Change-Id: Iaa3619a791c20ce3562a1efd2cf90c72933b729a
The directory cache and the database's Load to RAM feature
each result in a much better user experience.
But, when both features are enabled at the same time, it
can take a very long time on older players - easily several
minutes for larger libraries - until all of the database's
dircache references have been updated.
Include a 'Quick' option that causes the database to ignore
dircache references which can *significantly* reduce disk
activity after booting.
Change-Id: I25ae779c97d03885b06d5a28d8be55c0d05692a5
The "Reload After Saving" setting was added in
g3347 (4f83e66) to solve FS#13287, by allowing
you to bookmark a modified playlist after saving,
without having to manually reload it first.
Since the rewrite of playlist_save in g5192
(90e3571), a modified playlist doesn't have to be
reloaded anymore in order to be bookmarked after
it's been saved, unless it contains queued tracks.
To cover the remaining use cases of the previously
available option, Rockbox will now offer to remove
any queued tracks from a playlist when saving it.
Change-Id: I2d6f12bcce14d8ff41a4d921ce84d628774103ac
The perceived loudness change of a change in volume depends
on the listening volume: at high volumes a 1 dB increment is
noticeable, but at low volumes a larger increment is needed
to get a comparable change in loudness.
Perceptual volume adjustment accounts for this fact, and
divides the hardware volume range into a number of steps.
Each step changes the dB volume by a variable amount, with
most of the steps concentrated at higher volumes. This
makes it possible to sweep over the entire hardware volume
range quickly, without losing the ability to finely adjust
the volume at normal listening levels.
Use "Volume Adjustment Mode" in the system settings menu
to select perceptual volume mode. The number of steps used
is controlled by "Number of Volume Steps". (Number of steps
has no effect in direct adjustment mode.)
It's still possible to set a specific dB volume level from
the sound settings menu when perceptual volume is enabled,
and perceptual volume does not affect the volume displayed
by themes.
Change-Id: I6f91fd3f7c5e2d323a914e47b5653033e92b4b3b
Now that all users have replaced setting IDs with direct pointers,
find_setting() and friends don't need to return an ID value.
Change-Id: I8c5c31bb68d3bca5350d43538335265a55fd5517
Accept a pointer to struct settings_list instead of an index in the
settings array. Refactor the skin engine's touchregion_setup_setting()
to avoid the use of indices.
Change-Id: I784a5e49205da6874b8b419dd5413f722ad45b67
Add a new setting,
database path: /path/to/folder
to change where the database files are stored, which allows it to
be shared by multiple builds when using multiboot. This avoids the
need to maintain a separate copy of the database for each build.
This setting can only be set from the config file; it has no menu
option yet (due to lack of a GUI to pick the directory).
Change-Id: Ide7b3ccdd84abb62b52f900421bd3d101773e093
The old inline implementation was buggy -- it didn't check the
suffix was actually at the end of the string before stripping
it, and didn't check for truncation. This version also avoids
using an extra buffer.
Change-Id: I33abfefc508675d3079cc64a9ad2b11d646baa0d
Useful feature for audiobooks. To rewind from the end of the previous track - press rewind at the very beginning of the current track. So if you are in the middle of the track - first rewind till beginning then release and press rewind button again (Playback Settings -> Rewind Across Tracks option should be enabled)
Fixes FS#13290
Change-Id: I5d7f06f64ad76d1e8f7827fe594ccca5f621769d
Updated version of the patch originally by user cockroach
UNTESTED
Ipods?, Iriver H10,
I do not own these players so YMMV
https://www.rockbox.org/tracker/task/13193
Change-Id: I7924837f582cc5c49ee68c186d6822f577f65147
Add a setting that makes Play and Play Shuffled in the playlist
context menu leave the current song (if any) playing when they
replace the playlist. Default to on, since this was the behavior
of the old "Clear List & Play Next" option.
Change-Id: I1340aed5c28bb3244e36d0953b3308ae59681c97
Tested with my SansaClip+. I don't think this will need extra battery
but let me know if I am wrong.
Change-Id: I287dae134113e0f8a138af68f5087b8ea45b0f4c
Large embedded album art can cause pauses during
playback or when skipping between tracks, especially
on older devices, but embedded art is currently loaded
even when separately stored smaller image files would be
available.
A workaround is to remove large album art from the
metadata of files.
This now adds a setting to either turn off loading of
album art completely, or to prefer loading the album art
from a separate image file and thus ignore the embedded
versions.
Change-Id: I22fb581abf56072e35e6c29d72e553747ec1a96a
In addition to the existing behavior of pausing
after each song, this adds options to pause
after playing current:
Album,
Album Artist,
Artist,
Composer,
Grouping / Work, or
Genre.
Allows you, for example, to only listen to the
remaining movements of a classical work
without having to purge your playlist of any
upcoming songs.
Change-Id: If18f4a5d139320026cc5fcc9adf29dd8e4e028a8
The sort order of numeric lists can now be changed with the
new "List Order" setting. It defaults to ascending for most
scrollwheel targets and descending for all others, matching
the old hardcoded behavior.
Change-Id: I4866f04ec5995158edf9e40badf7f661b3ddea81
Also keeps display from lighting up before shutdown,
which reduces distractions, especially at night and
when the sleep timer is used by allowing the
screen to remain dark.
Change-Id: I1c2d1966f6fb9766532adf01e8828876a871857f
- Don't include the 'battery capacity' setting unless the
target allows changing it.
- Clean up the preprocessor conditionals used to check for
variable battery capacity support.
- Don't use a variable for battery capacity unless it is
actually needed.
Change-Id: I3d8a338f107014f2c5098bc0a44ef0cfb4df9356
Allows user to decide whether scrolling lists will wrap around
to the opposite end after the first or last item has been reached.
Change-Id: I22156812cf4c857ddc4b6c48c1cef013b1985260
Works from any playlist saving operation accessed from the
While Playing Screen, all other playlist saving operations
are unchanged.
Now a user-selectable setting! Located in
General Settings -> Playlists -> Current Playlist ->
Reload After Saving (Yes/No)
Change-Id: I5085c3f4c56c518a812d5ee015d15cc4dca19a28
(Don't include rbpaths.h in settings.h, or string-extra.h in rbpaths.h)
Build-tested on rocker, erosq, mini2g, nano2g,
xduoox3, clipzip, dx50, and uisim
Change-Id: If32e9c9910f5c8247a655cb64522b84d6d7ccbb5
This allows the user to make use of the DAC's power-saving abilities.
The two modes are "high performance" and "battery saver". This feature
is supported by the AK4376 DAC in the upcoming FiiO M3K port.
The setting is only a manual toggle right now, but in the future it
could be hooked up to the battery level (via another setting) so it
can be toggled automatically when the battery gets too low.
Change-Id: I482af6e2f969fcbdeb3411bd3ff91f866b12d027
Options to add shuffled tracks and to queue tracks in the
Current Playlist Submenu can now be hidden, or the latter
can also be put into its own submenu.
Users can customize this in Settings by going to
"General Settings - Playlists -> Current Playlist" and
choosing from "Show Shuffled Adding Options" (No / Yes)
or "Show Queue Options" (No / Yes / In Submenu).
Allows for the paring down of the set of choices to
a minimum of the 4 more common ones for adding tracks
to a dynamic playlist (coming from the current total
of 11).
Defaults have been set so that users have to actively
modify their settings to notice any difference, which
makes it unlikely that anybody's workflow would be
negatively affected by this change.
Change-Id: Ibe48fc4da2c79f54cd7272df8e1e3ba9955203e5
(The usb_mode selection setting was actually broken even though
it had been previously compiling...)
Change-Id: I0cac31d24c0ef684b934e40ab14f683cc4a31738
v3: Add in config option
v4: Bugfixes
v5: Force a redraw upon exiting
v6: keypress-in-chargeonly mode enables mass storage (and vice versa)
v7: Fix bootloader builds
v8: Update manual, and have bootloader respect keypresses
v9: Change default to mass storage (ie no change in behavior)
todo:
* test-build dx50/dx90
* Switch from yes/no to proper menu?
* prevent WPS progress bar from drawing over us
Change-Id: I82e0ccb08497b7a5aa756ce77f1332ee963703a7
...
Change-Id: I7946cf240b18a4fa8ace5e25e1eb6e97b8b12d7c
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
talk_time and talk_date are now exposed to plugins, so the strings they
reference need to be moved from rtc-only to global.
Change-Id: I88166dc21455d595878d3d1ec557289cd3a5ff6b
