- implement request_endpoint
- setup nextep chain for in endpoints
- remove useless dcache operation on IN transfer completion
- fix transfers to use correct max packet size
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28028 a1c6a512-1295-4272-9138-f99709370657
- use uncached address to access setup packet
- implement driver exit
- stop forcing full speed
- change fifo sizes on init
- don't call invalid_dache() on setup packet because it makes everything fail
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28027 a1c6a512-1295-4272-9138-f99709370657
FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
- change buffer alignement to 32 bytes (not sure if it's useful)
- flush rx fifo on reset
- use AS3525_PHYSICAL_ADDR for DMA
- reset endpoints structure states on reset
- force full speed for debugging purpose
- add more debugging code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27986 a1c6a512-1295-4272-9138-f99709370657
Since memory on 32mb ipod videos is mapped twice, a 64mb build still has codecs and plugins mapped in a usable area. This means that all that needs to be done to support 32mb and 64mb boards with the same build is to adjust audiobufend to avoid using more than the actually present RAM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27960 a1c6a512-1295-4272-9138-f99709370657
Without this change the backlight would be enabled but the screen would
show the last content displayed before the screen went off
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27957 a1c6a512-1295-4272-9138-f99709370657
This is the first step to allowing a single build which will work on any ipodvideo.
A global variable, probed_ramsize, is initialised to either 32 or 64 early in boot.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27937 a1c6a512-1295-4272-9138-f99709370657
ata-meg-fx: use unsigned line number, so % (modulo) is optimized
tcc7*: use proper printf format and remove casting
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27935 a1c6a512-1295-4272-9138-f99709370657
The driver is stable so we can use error codes for debugging
Fix 2 problems in error code path:
- release sd mutex
- release dma module when needed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27915 a1c6a512-1295-4272-9138-f99709370657
fix DMA buffers when the src/dst is in IRAM
It worked fine because all the buffers are in DRAM, and the virtual
address happens to be the physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27876 a1c6a512-1295-4272-9138-f99709370657
(USB stack is not used by default)
This makes debugging the USB driver easier
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27847 a1c6a512-1295-4272-9138-f99709370657
Users will have to reboot to OF manually or to power off, and then plug USB
No message is displayed because usb_detect() is run from a tick
This lacks documentation but should be OK for Unstable devices, and
will hopefully prevent clueless users from opening their devices and
breaking them definitely, instead of waiting for the battery to power
off.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27837 a1c6a512-1295-4272-9138-f99709370657
