prevent d_names data from being overwritten (likely causing garbage in
file browser and other strange symptoms).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30122 a1c6a512-1295-4272-9138-f99709370657
cache new pointers to dircache items when dircache goes
offline and comes back onlineagain (during tagcache commit). This
should prevent wrong filenames to appear in playlist.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30047 a1c6a512-1295-4272-9138-f99709370657
Only integer IDs are exposed from dircache with this. This way the cache is isolated from other modules.
This is needed for my buflib gsoc project.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30038 a1c6a512-1295-4272-9138-f99709370657
The dircache_entry structs are now allocated subsequently from the front, allowing to treat them as an array. The d_names are allocated from the back (in reverse order, growing downwards).
This allows the cache to be moved around (needed for my buflib gsoc project). It is utilized when loading the cache from disk (on the h100), now the pointer to the cache begin doesn't need to be the same across reboots anymore.
This should save a bit memory usage, since there's no need for aligning padding bytes after d_names anymore.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30036 a1c6a512-1295-4272-9138-f99709370657
Use a recursive helper function with strlcat to build up the path backwards. This way the tree doesn't need to be walked twice and no extraneous size calculation is needed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30033 a1c6a512-1295-4272-9138-f99709370657
It's reduntant, and enlarges the dircache unnecessarily. Saves 4 byte per file in the whole filesystem.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30032 a1c6a512-1295-4272-9138-f99709370657
In order to enable it, #define HAVE_DUALBOOT when building the bootloader.
Do not use the automatically created x5_fw.bin or m5_fw.bin, but use mkboot
to create a new firmware file from an OF x5_fw.bin resp. m5_fw.bin and
bootloader.bin.
The dual-boot bootloader boots the OF when pressing Play (main or remote) for
more than 3 seconds. Hold it a bit longer because the OF also checks buttons.
Short press boots rockbox.
As a bonus, the Play button read (for hold check) is done a bit earlier for
single-boot mode as well.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30018 a1c6a512-1295-4272-9138-f99709370657
This event is sent before the audio is routed back to the speaker so we
get the information about the unplugged headphone notably earlier.
Decrease the debouncing of the headphone status from 1s to 0.5s to work
around audio still getting played back via the speaker due to the pause
delay by debouncing. On Android we shouldn't need the debouncing at all.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29957 a1c6a512-1295-4272-9138-f99709370657
Listen to headphone plug events. There are currently two glitches with this:
- Android takes a while until it reports the unplug event, so there will be
some delay until playback gets paused. This is an Android limitation.
- Rockbox debounces headphone state changes for one second. Therefore playback
will shortly be routed to the speaker on unplug until Rockbox does the actual
pause.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29956 a1c6a512-1295-4272-9138-f99709370657
Codec files are loaded as dynamic libraries. Instead of extracting them from
the packaged libmisc.so and therefore having them present twice on the device
put them into the apk as native libraries. Decreases the size of the installed
Rockbox by the compressed size of the codecs. Also, the extraction on first
Rockbox startup gets notably faster since it's less data to extract.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29940 a1c6a512-1295-4272-9138-f99709370657
The NDK includes swap16 and swap32 macros, Rockbox as well. Use the Rockbox
ones and avoid a macro redefined warning.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29939 a1c6a512-1295-4272-9138-f99709370657
