This is a part of the large iPod Nano 4G and iPod Touch 2G support patch.
Credit: Cástor Muñoz <cmvidal@gmail.com>
Change-Id: Ica1e2b8e82ea162ebab01cf119f5da2f8877bc05
Check for the ES9018K2M dac in the bootloader for
hw1/hw2 devices. Assume that all devices newer than
hw2 have ES9018K2M DAC unconditionally.
All devices will now report the correct hw revision
in the debug menu under Device Data.
Add devicedata.version field, current version 0.
Rename device_data.lcd_version to device_data.hw_rev.
hw2 devices with older bootloaders which ID as hw1 are special-
cased to keep using hwvol on them. They should still upgrade though.
Change-Id: If0fd5ce3bc6e85e511047721ec18e42fb89312e7
Support hw4 units with AXP2101 PMU
Bootloader successfully compiles and loads onto device.
The LCD appears to be identical to hw3 units.
Scroll wheel and buttons work
Audio output works, including volume.
HP/LO detect works
Rockbox build is generic
GPIO gating logic seems to be working as intended now.
- Added new GPIO definitions - some significant overlaps with pins
from previous hardware revisions...
- Added some GPIO definitions for older players we didn't know about
- Add register definitions for AXP2101 from datasheet
(these are very different from AXP192!)
- Add AXP2101 regulator definitions, need to support multiple step
sizes per regulator.
- Verify AXP2101 voltage set multi-range logic
- Verify AXP2101 voltage get multi-range logic
- Make AXP2101 its own driver
- AXP2101 driver should be "minimally viable", though I think
there is some extra functionality that could be implemented.
- Disabling the coulomb counter stuff - we could maybe make
the E-Gauge work for the same purpose, but it only appears to
be used on the debug screen at the moment so it doesn't seem
like it's worth the effort.
- Found new button GPIOs
- Found error in my GPIO setting logic, blue light works now!
- Set LDO/DCDC output voltages to OF's settings, as far as
I can tell.
- Determined we probably want TCS1421_CFG1:0 to be 0x00,
for UFP behavior
- Tested this rb build with both old and new bootloaders on hw1.5,
hw2, hw4 in as many configurations as I can think of, works across
the board.
- Bootloader can install itself on hw4, so nand chip isn't novel
- Uninstallation file can be made by patcher script, works on hw4
- Installation file can be made by patcher script, works on hw4
- Added HW4 to rbutil, manual
Change-Id: I5b75782273e81c2c6f2b9c79501c8b7cbf88391f
This is a driver for the UART controller on the S5L87xx series of SoCs, which is named after the SoC family.
Since S5L8720 is confirmed to have the same interface and the newer models probably also have it, the driver is renamed to reflect this.
Change-Id: I974c002924372e860db0e49235d108dab87f8831
This is a preparation to introduce support for the following SoC models: S5L8720 (iPod Nano 4G, iPod Touch 2G), S5L8730 (iPod Nano 5G), S5L8723 (iPod Nano 6G) and S5L8740 (iPod Nano 7G)
The whole family consists of SoCs which are similar, running ARMv6 and Thumb2 instructions, but some peripherals are located at a different address.
No functional change is to be expected so far.
Change-Id: If1f7669c49cf110ccc52c5234cc42ffd6f2b4e80
Status:
- tested on:
Samsung YH920 - it uses this detection too, it always should have
the radio.
Samsung YH925 with the radio.
- untested on:
Samsung YH925 without the radio.
Change-Id: I68b39c09d6b7e26a4c373fbd8bf9401a97e86123
Instead of verifying the CRC before every access of the boot data,
verify the CRC once at startup and set a flag to indicate the boot
data is valid.
Also add a framework to support multiple boot protocol versions.
Firmware declares the maximum supported protocol version using a
version byte in the boot data header. The bootloader chooses the
highest version supported by it and the firmware when deciding
what boot protocol to use.
Change-Id: I810194625dc0833f026d2a23b8d64ed467fa6aca
Basically the namespace code _never_ actually linked properly on hosted
targets, but nobody noticed as there were no users, causing the symbols
to be dropped with no fuss.
The tagcache namespace awareness stuff pulled in the namespace code,
which made things go kaboom due to it relying on native FAT parsing
code.
Change-Id: Idef5f44b026c875022436809ca1f5015eece714a
Add HW volume control via ES9018K2M, and reorganize
eros_qn_codec.c/.h, audiohw-erosqnative.c.
This automatically detects the presence of the new DAC and
uses its hardware volume scaling. If not present, use same
SWVOL we have been using so far.
Add debug menu readout of SWVOL/I2C result.
Break out es9018k2m stuff into its own file so that
maybe it can be useful to other ports.
Note that we may need to get smarter about detecting the DAC
type if/when another model emerges.
Change-Id: I586a1cf7f150dd6b4e221157859825952840af56
In my opinion this API is just not very useful - design is kind
of questionable. There are hidden limits on the struct size and
bugs on 64-bit platforms due to assuming sizeof(long) == 4.
At the end of the day, the only major user was the tagcache and
it's actually less code size to do endian swapping manually.
Change-Id: I451c7f1a10cf3e28744c32c0f1f39a710d5cc100
This is intended for improving the effectiveness of tools like
ASAN when debugging memory errors in the sim. It's not meant to
be a serious allocator for hosted targets.
Enable it by changing the buflib backend in config.h.
Change-Id: I0cf23cefa47ee35dede7b49e0e5b72dac60e8d3e
chunk_alloc allows arrays (or any data) to be allocated in smaller chunks
you have to save the indices..
variable data will have variable indices you need to
store these as [chunk_alloc] doesn't keep track
if you have a fixed size for each
alloc you can do indice / sizeof(data)
or index * sizeof(data) to convert
Lots of debug stuff still in and it needs optimization
User provides chunk_size and max_chunks
max_chunks * struct chunk will be allocated at start
with (1) chunk_size allocation initially
alloc_chunk() with size = 0 shrinks the last allocation to the size of the data used
add OOM checks on buflib_alloc -- oops
move bytes available to the header -- less memory per chunk & better alignment
keep track of the current in use chunk index -- should speed things up a bit
Now allows:
realloc chunk header
larger allocations than chunk size
reallocs smaller than existing will shrink the current array
rather than alloc a new and copy data
Comments welcome :)
Change-Id: I8ed170eef73da95da19430a80b32e5debf0c8276
replace applicable calls to strlcpy with calls to strmemccpy
which null terminates on truncation
in theory the strmemccpy calls should be slightly faster since they
don't traverse the rest of the source string on truncation
but I seriously doubt there is too much of that going on in the code base
Change-Id: Ia0251514e36a6242bbf3f03c5e0df123aba60ed2
Not sure if this is worth the added bin size yet but I will
see where I can use it to try and make it worth it
Change-Id: Icc299d3986172ff224a14be48da3bf065d728a66
splits on spaces also considers \r\n\f\v\t as mandatory breaks
I'm still working on the strptokspn function
my goal is to use it directly rather than storing the matched char
and modifying the source string with \0 in order to tokenize the output
--Done
Change-Id: I7f378b5b9c4df8f10899b9a55a98950afb3931dc
Merge the x1000 and jz47xx exception handling code since they use
the same exception vectors and handlers. The interrupt handler is
now called from the common exception vector, but remains separate
for each board since they have different IRQ layouts.
The new exception handler can provide a stack traceback from the
interrupted code, rather than the (uninteresting) caller traceback
displayed by panicf. This allows you to see what led up to a null
pointer deref or division by zero, which makes it _much_ easier to
track down errors that occur in common leaf functions like strcmp.
Change-Id: I59a0ebb5e40fcb36505c3bfdb47f8cac2f9936b1
Instead of putting "#ifdef LCD_STRIDEFORMAT" at every usage of the
macro it's simpler to have config.h define LCD_STRIDEFORMAT to the
default of horizontal stride when the target leaves it unspecified.
Change-Id: Ib187012aad65ac678dbd837b1464a83bad722411
The implementation of write_bootdata() and get_redirect_dir() was
copied verbatim in two different places, obviously a bad thing for
maintainability. This moves them to a new file multiboot.c as they
are only used for multiboot.
Change-Id: Id0279216e4dd019f8bf612a81d3835eff010e506
Adds a loader for the legacy uImage format that is commonly used on
embedded Linux systems. It verifies checksums and supports uncompressed
and gzipped images. Supports arbitrary reader functions to allow the
images to be streamed off any storage device, for optimal RAM use.
Change-Id: I93c35f9a6f323999a22a07300e05627fabfcbd2c
Provide definitions for the macros:
* RB_ROOT_VOL_HIDDEN(v) to exclude certain items from the root.
* RB_ROOT_CONTENTS to return a string with the name of the
directory to mount in the root.
Defaults are in export/rbpaths.h
It's a bit much for those that don't need the full functionality.
Some conditional define can cut it back a lot to cut out things only
needed if alternate root mounts are required. I'm just not bothering
yet. The basic concept would be applied to all targets to keep file
code from forking too much.
Change-Id: I3b5a14c530ff4b10d97f67636237d96875eb8969
Author: Michael Sevakis
This caused LCD problems on the ErosQ, where the screen would
go white until being put through a sleep/wake cycle. The exact
reason for this isn't obvious, but the problem didn't exist
prior to the AXP driver rewrite.
The two dependent changes,
42999913ba - x1000: Increase USB current limit to 500 mA at all times
90dd2f84a9 - x1000: Correctly limit USB charging current
ended up bringing the USB charging situation back to where it
was prior to the rewrite, so the cleanest option is to revert
the whole lot.
This reverts commit 42999913ba.
This reverts commit 90dd2f84a9.
This reverts commit 2d89143962.
Change-Id: I1cff2bfdd1b189df14bcf8cce42db725caa470d7
I noticed a few mistakes in the old driver code and it was in
need of an overhaul anyway... I decided to scale things back,
simplify the code and remove most of the debug menus, netting
a nice code size savings.
One new feature is an advanced debug menu which is accessible
by recompiling the code with AXP_EXTRA_DEBUG. It adds quite a
bit of code size and isn't useful other than for development
so it must be manually enabled by editing the source.
Change-Id: I30e17c1194c14823decd726a574ed14451d4cb2d
It has only a couple GB of onboard flash storage with no storage
driver in Rockbox. It hasn't seen any meaningful development since
its initial commit, it's not on the build farm, and the bootloader
build is broken by other refactoring.
Change-Id: Idd9e3c46fac9b96f416ce444182f97a50770e747
This will eventually be used by the ZIP module and other things
that support DEFLATE based streams.
Change-Id: I4acc9561eb56c9c368d1defab9c14e0454d105e1
This adds an adapted version of the adler32 algorithm from tinf/zlib
which will be necessary to support ZLIB deflate streams in the future.
Change-Id: Ie60e15acb288acf56a2d44e3d3e912e1b3eb2216
What works:
- LCD: 16-bit RGB565
- all buttons, including scrollwheel
- SD Card
- Battery level and charging/not charging status
- USB
- audio
- sample rate switching
- HP / LO detect, with "safe" fixed LO volume -
LO volume will only be put to user-defined max volume
if headphones are not present.
- rtc
- Plugins build, tried a couple and they seem OK
- Bootloader, installable to nand via usbboot
What doesn't work:
- Dual Boot
- power on/off has intermittent, low volume audio click
(sometimes it's completely silent, sometimes there's
a click)
- Audio uses 16-bit volume scaling, so clicking/popping
is pretty bad at lower volumes - need 32 bit volume
scaling, 24 bit I2S data
- USB HID keys not yet defined
- no jztool support
Unknowns:
- Stereo Switch pins: Direction select, AC_DC
(probably not even hooked up)
- What is the actual purpose of the Stereo Swtich?
- How does the bluetooth module connect?
"Someday" stuff:
- get LCD working at higher bit depth
- Bluetooth
Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33
- Audio playback works
- Touchscreen and buttons work
- Bootloader works and is capable of dual boot
- Plugins are working
- Cabbiev2 theme has been ported
- Stable for general usage
Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps.
There's a few minor known issues:
- Bootloader must be installed manually using 'usbboot' as there is
no support in jztool yet.
- Keymaps may be lacking, need further testing and feedback.
- Some plugins may not be fully adapted to the screen size and could
benefit from further tweaking.
- LCD shows abnormal effects under some circumstances: for example,
after viewing a mostly black screen an afterimage appears briefly
when going back to a brightly-lit screen. Sudden power-off without
proper shutdown of the backlight causes a "dissolving" effect.
- CW2015 battery reporting driver is buggy, and disabled for now.
Battery reporting is currently voltage-based using the AXP192.
Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a
Atmel AT88SC6416C CryptoMemory is almost I2C compatible. The device
is connected to bitbanged I2C bus shared with compliant I2C devices.
Change-Id: Iec54702db1bdfb93c01291eef18ec60391c63b16
This provides rudimentary support for parsing the contents of a ZIP
file. For now this just supports uncompressed file entries but DEFLATE
support is planned. This also only implements a low level public API
so more work will be needed to make it usable by application code.
Change-Id: Ia68b3078e5276666a0e5023f4bc7a9f94272738a
Import non-free firmware image from linux-firmware package.
Firmware loading works but is disabled at compile time because just
loading firmware without configuring device results in higher power
consumption without any benefit to end user.
Change-Id: I8fd252c49385ede1ea4e0f9b1e29adeb331ab8ae
