This also modifies the configuration file to include macros
defined in the H100 / H120 implementation.
Change-Id: Iae845889c98661ec548c04fc57e733dcc346c0f1
* Enabled MULTIDRIVE and ROOTFS_HOTPLUG for full hotswap!
(Requires updated bootloader/integration!)
Change-Id: I7dad1f8d375e087c36fce37bec3e9184602ede50
* Cannot turn off the LCD directly (have to rely on backlight)
* Only insmod/rmmod the usb gadget modules if state changes
Change-Id: I9ea90177d496cd035ada93e04a93a7c6f2e84706
* Specify exported USB VID/PID in target config header
* Don't fail if the sd filesystem has already been remounted
(ie due to platform hotplug)
Change-Id: Ifd2dae0c4f15086bf2bf89eb093018b3c4d2b75d
* HOME_DIR is now either "/" or special "<HOME>"
* target-specific "home dir path" is defined solely by PIVOT_ROOT
* PIVOT_ROOT path is now defined in toplevel config files
* Make Samsung YP-R0/R1 and SONY_NWZ use PIVOT_ROOT too
* Do not prepend PIVOT_ROOT path if the path already has it!
* Do not play these games for __PCTOOL__ builds
Change-Id: I3d51ad902a5f9cafe45ba15ba654f30f1ec6113a
The Q and K have a slightly different case, but the hardware under the
shell is completely identical.
These models are rebadged versions:
* Hifiwalker H2 (== Q)
* AGPTek H3 (== K)
* Surfans F20 (== K)
Other notes:
* Significant improvements in the shared Hiby-platform launcher/loader
* SD card can theoretically be hot-swapped now
* Support external USB mass storage!
* Some consolidation of Hiby-platform targets
* Some consolidation of plugin keymaps
Todo/known issues:
* Keymaps need to be gone over properly
* Convert to HAVE_SCROLLWHEEL?
Change-Id: I5a8a4f22c38a5b69392ca7c0a8ad8c4e07d9523c
Most credit goes to: Roman Skylarov
Additional integration and refactoring by myself.
*** COMPLETELY UNTESTED ***
Change-Id: Ia64c36d92e0214c6b15f7a868df286f8113ea27b
This codec requires floating point.
Original author: Peter Sovietov
Ported to Rockbox: Roman Skylarov
Further integration and bugfixes: Solomon Peachy
Change-Id: I781ecd3592dfcdbbc694063334350342534f1d6c
It doesn't work properly and interferes with the power button in the keymap.
Rework WPS keymap a bit to make single-tap power emulate lock.
Change-Id: I9d9b9b4adcea3764e6e427f484e051c9bab9d13b
Note: PCM mix buffer sizes are _way_ too small for these high bitrates
(We really need to make the mixer stuff use dynamic buffer sizes based
on the bitrate. Maybe pre-allocate a max size based on upper bitrate limit,
but use only part of it at lower bitrates? So we can have sane latency..)
Change-Id: Id7b4afd73dba7f1ffb84b2e1c016859fae5d6835
* xduoo x3ii/x20: Better line out support
* less granular volume settings (too many steps before)
* Better handling of swiching sample rates
* Log actual sample rate in debug menu
Most credit goes to Roman Stolyarov
Additional integration [re]work by myself
Change-Id: I63af3740678cf2ed3170f61534e1029c81826bb6
* SAMPR_CAPS_ALL -> SAMPR_CAPS_ALL_48/96/192
* All targets claiming SAMPR_CAPS_ALL now get appropriate subset
* No need to explicitly define HAVE_PLAY_FREQ
* Rates that are a multiple of 44 or 48KHz can be used for playback
Inspired by a patch by Roman Stolyarov, but substantially rewritten by myself.
Change-Id: Iaca7363521b1cb9921e047ba1004d3cbe9c9c23e
Back off to 480MHz [max] clock, bus/mem clock of 120MHz.
576 is unstable on at least one unit, and 528 still glitches.
Change-Id: I020e48532524e739f3bfa42bed570381ccd34959
default/low speed is 192 MHz, Max is 576
Downclock PCLK/MCLK/etc to 96MHz to save a bit of juice
Honestly the high speed could be dialed down to, eg 384
as this thing is so bloody fast..
Change-Id: Ie65597c74290f1603e65f69dae8e75b59c8ba0b4
PLL0 Needs to be a multiple of 48MHz for sane USB operation!
(Indeed, "typical" clock for this part is 528, but that seems a
waste of power)
Also fixes a minor bugaboo in the jz4670 usb divisor calculation
that won't matter until we enable reclocking
Change-Id: I40b1fd1ae48871e50885981ccc8b01feb711b9a5
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
