default/low speed is 192 MHz, Max is 576
Downclock PCLK/MCLK/etc to 96MHz to save a bit of juice
Honestly the high speed could be dialed down to, eg 384
as this thing is so bloody fast..
Change-Id: Ie65597c74290f1603e65f69dae8e75b59c8ba0b4
PLL0 Needs to be a multiple of 48MHz for sane USB operation!
(Indeed, "typical" clock for this part is 528, but that seems a
waste of power)
Also fixes a minor bugaboo in the jz4670 usb divisor calculation
that won't matter until we enable reclocking
Change-Id: I40b1fd1ae48871e50885981ccc8b01feb711b9a5
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
HAVE_LCD_BITMAP is now redundant.
lcd_bitmap is always-on in features.txt so manual and lang strings
don't have to change
Change-Id: I08eeb20de48099ffc2dc23782711af368c2ec794
On some devices, the button driver allows a "software poweroff" by long-
pressing a certain key. This behavior is inconvnient when that button needs
to be held down for other purposes, such as moving the cursor in rockpaint
or sgt-untangle.
This patch allows selectively disabling the software poweroff (enabled by
default) from both core and plugin code.
Change-Id: I7580752888ae5c7c7c5eb1be5966e3d67f17d4b4
No targets are enabled, but the hosted Hiby-based targets could have this
feature enabled if they weren't so buggy:
* No generic way to determine wakeup reason under Linux
* No generic way to be asynchronously notified if the alarm is
triggered when we're already awake
* Shutting down may clobber RTC wakeup (driver/etc dependent)
* Rocker's kernel's RTC driver has some 24h clock and timezone-related
issues.
So, the infrastructure is arguably useful, but the only applicable
hardware I have is pathologically brain-dead.
Change-Id: Ie1aa38e72b831c8a0695ff684f260e514eef9710
Only AGPTeck Rocker is enabled for now, and it doesn't work properly:
* No generic way to determine wakeup reason under Linux
* No generic way to be asynchronously notified if the alarm is
triggered when we're already awake
* Shutting down may clobber RTC wakeup (driver/etc dependent)
And finally:
* AGPTek kernel's RTC driver has some 24h clock and
some timezone-related issues.
So, the infrastructure is arguably useful, but the only applicable
hardware I have is pathologically brain-dead.
Change-Id: Iac6a26a9b6e4efec5d0b3030b87f456eb23fc01d
Provided by Roman Stolyarov
Integration, Refactoring, and Upstreaming by Solomon Peachy
X3II confirmed working by forum tester, X20 is nearly identical.
This includes bootloader, main firmware, and the flash image patcher.
Eventual Todo:
* Further refactor AGPTek Rocker & xduoo hiby bootloaders
* Further refactor AGPTek Rocker & xduoo hosted platform code
Change-Id: I34a674051d368efcc75d1d18c725971fe46c3eee
on timer_unregister callbacks are not removed
It seems (at least on the Rocker) timers continue to fire (for a bit??)
Now we store the registered callback in the sigev structure and check
that the callback matches the one registered when the timer is created.
This should stop the possible case of a new timer getting spurious callbacks
We also now NULL the callbacks on un-register which should stop the segfaults
Added some notes to timer.c and timer.h
Change-Id: Ia155c3a4e4af89f474d55ed845560ccc1fab85aa
Gives us the lowest HW sample rate that's >= 22KHz.
Needed because some targets that don't support 22K support 11K or 8K, so
HW_SAMPR_MIN will give us much lower quality than is acceptable.
Take advantage of this new macro in the SDL, MIDI, and MIKMOD plugins,
and implement a crude "fast enough" test to enable higher sample rates
on more capable targets.
Change-Id: I6ad38026fb3410c62da028e78512e027729bb851
The screen content is only poorly visible without backlight, it's not
really usable this way.
Removing HAVE_TRANSFLECTIVE_LCD also fixes the "flashing screen"
issue that appeared on some models when "lcd_awake()" is called.
Change-Id: I3ba954c944077a32016820462f782dc27a31f8d8
This reverts commit a89bf68e88.
HAVE_MULTIVOLUME && HAVE_MULTIDRIVE implicitly means "allow 4 volumes
per drive" whereas the normal MULTIDRIVE behavior is to only allow 1
volume per drive.
Adds:
sound_current(int setting)
returns the current sound setting from global_settings
complements sound_max, sound_min and sound_default
Change-Id: I35bd893753c958f808492906fe533edc51d5d57c
This patch is relevant for targets with a transflective display.
If the backlight was set to "always off" (e.g. to use the lcd
in a pure passive way), and the sleep timer ran off, the LCD
would stay disabled and didn't wake up when a button is pressed.
Change-Id: I0a157c7f421d9fc4c7d8ba903f2cf93f6cef51d0
This allows targets to automatically switch audio settings when the
line out is plugged/unplugged.
Only hooked up on the xDuoo X3, but there are other potential users.
Change-Id: Ic46a329bc955cca2e2ad0335ca16295eab24ad59
Original patch by Alexander Spyridakis
Modified by Steve Bavin and Igor Poretsky
Keymap fixes by Marianne Arnold
Change-Id: I5a252d97d2b05c533e048931f7354f4261f76499
Unifies time formatting in settings_list.c allows time format to
display as HH:MM:SS.MSS or any consecutive combination thereof
(hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss)
works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING'
Time is auto-ranged dependent on value
Adds talk_time_intervals to allow time values to be spoken similar to
display format: x Hours, x Minutes, x Seconds, x Milliseconds
Table lookups merged or removed from recording, clip meter and lcd timeout
-String_Choice replaced with TABLE_SETTING or INT_SETTING for these
functions as well, cleaned-up cfg_vals that get saved to cfgfile
RTL Languages ARE supported
Negative values ARE supported
Backlight on/off are now Always and Never to share formatter with LCD
Timeout
Added flag to allow ranged units to be locked to a minimum index
Added flag to allow leading zero to be supressed from the largest unit
merged talk_time_unit() and talk_time_intervals()
optimized time_split()
optimized format_time_auto()
Backlight time-out list same as original
Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd
