Lots of the changes are due to changing storage_(read|write)sectors() from macros to wrapper functions. This means that they have to be called with IF_MD2(drive,) again.
Flyspray: FS#11167
Author: Frank Gevaerts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25459 a1c6a512-1295-4272-9138-f99709370657
We can write to DBOP_DOUT in 8 bits mode : bits 7..0 are mapped to the
LCD, not bits 15..12 and 3..0 like on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25455 a1c6a512-1295-4272-9138-f99709370657
Select (B)ootchart in advanced options in configure, and logf will record timings for various stages of boot, for performance comparisons. Format logged is:
BC:>function_name,123,80
where 123 is the line number, 80 is the number of ticks since boot. This can be loaded as CSV into a spreadsheet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25426 a1c6a512-1295-4272-9138-f99709370657
Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
Instead of modifying CGU_PROC to get 24MHz pclk, just switch to fastbus else Clip+ wouldn't boot
Tested on fuzev1/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25413 a1c6a512-1295-4272-9138-f99709370657
Add HAVE_AS3543 config define to differentiate the bits changed since as3514/as3517
Enable recording on Fuzev2/Clipv2/Clip+, although it was tested on Clip+ only
Note: storage is still read-only so I tested by listening to headphones loopback and watching the recording level in recscreen
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25390 a1c6a512-1295-4272-9138-f99709370657
correct USB product ID
remove a define which is common to all as3525v2 and then built-in in the driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25367 a1c6a512-1295-4272-9138-f99709370657
Introduce STORAGE_ALIGN_DOWN, STORAGE_PAD (using new CACHE_PAD) and
STORAGE_OVERLAP (using new CACHE_OVERLAP), make them useful only when
PROC_NEEDS_CACHEALIGN and STORAGE_NEEDS_ALIGN are defined
Modify PP and nano2g system-target.h accordingly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25336 a1c6a512-1295-4272-9138-f99709370657
Move CLKDIV macros into clock-target.h.
Only enable the necessary interfaces for the 3 clock registers used for SD.
Add MEMSTICK and SDSLOT registers to bottom of register display in View HW info debug page.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25309 a1c6a512-1295-4272-9138-f99709370657
as3525 comes with a as3517, as3525v2 with a as3543, rename specific
registers accordingly
Existing problems: FM (line out) doesn't work, volume can't go below a
certain point
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25260 a1c6a512-1295-4272-9138-f99709370657
- buttonlight works
- backlight turns on (quite weak though and no brightness adjustment/backlight off functional)
- don't share drivers with e200v2/fuzev1 for now as it's not entirely clear how dbop plays into this
- deactivte scrollwheel as it's messing up the timer setup in kernel-as3525.c indicating the dbop input reading doesn't work well
- still no working bootloader/no lcd or buttons
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25225 a1c6a512-1295-4272-9138-f99709370657
CGU_PROC looks different from as3525v1 and there have been reports of
Clip+ becoming warm when boosted
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25020 a1c6a512-1295-4272-9138-f99709370657
Introduce a new .init section for initialisation code, so that it can be copied to an area which is later overwritten before calling. The stack/bss can then overwrite that code, effectively freeing the code size that the initialisation routines need. Gives a few kB ram usage back.
Only implemented for PP and as3525 so far. More targets could be added, as well as more functions.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25013 a1c6a512-1295-4272-9138-f99709370657
