Addition of rtc support for AGPtEK ROCKER broke building the UI Simulator
for Windows. This patch removes the rtc support if building UI Simulator for
Windows.
Remove dependency on settings.g for bootloader
ifdef out AUDIOHW_HAVE_EQ Settings these should be indexing the
global_settings.hw_eq_bands[AUDIOHW_EQ_BAND_NUM] struct
Change-Id: I1d1a8556ef88ce43397b600261696dacdf372034
Adds:
sound_current(int setting)
returns the current sound setting from global_settings
complements sound_max, sound_min and sound_default
Change-Id: I35bd893753c958f808492906fe533edc51d5d57c
The Quake plugin is the only code that actually relies on float
formatting. Because Quake only runs on targets with huge memory
anyway, limiting their formatting to just those targets will minimize
the increased memory use in the core.
Change-Id: Icdbe26ec6ede564861cc01ac4add76a12b00ecd5
Wanted to see how gnarly it is to do.
Big number handling could be done with better algorithms
since it can get a bit slow with large integers or tiny
fractions with many lead zeros when only a few digits are
needed.
Anyway, it supports %e, %E, %f, %F, %g and %G. No %a or long
double support seems warranted at the moment.
Assumes IEEE 754 double format but it's laid out to be able to
replace a function to handle others if needed.
Tested in a driver program that has a duplicate vuprintf and
the content was pasted in once it looked sound enough to put
up a patch.
Change-Id: I6dae8624d3208e644c88e36e6a17d8fc9144f988
For unknown reasons, -thumb builds need -lfirmware after -lrbcodec (but
still before -lunwarminder)i. Other builds are still happy if we do that.
Including it via CORE_LIBS instead of explicitly achieves that.
Change-Id: Id69e4a0c042f90f71cfd9a72202ce4d8ef6a4181
The bug was introduced in a06d9c8.
The patch also fixes some (more or less) related obsolete comments.
Change-Id: I5e491d64574c37cdbc46b146d7cfc555d86b9a11
This greatly increases the stability of SD card write operations.
(I suspect the underlying problem is not IRQ operation itself, instead
being exacerbated by it..)
Change-Id: Ia00f0656abd4b3cb0b1b5fc9db7c1b6a02847956
This is one of those fancy gold-plated devices. Of course it breaks my scripts
that were nicely expecting every device to start with NW.
Change-Id: I161320f620f65f4f92c2650d192b26a9831eeb9d
This should be done even if the backlight is set to "always off",
i.e. if the LCD is sleeping, a button press should be "eaten"
and just wake up the LCD.
Change-Id: I3946bdbbdc81f23eae3f47423123cefa275e0afc
This patch simulates the three possible states of a transflective
LCD: backlight on (bright screen as usual), backlight off (dimmed
screen) and LCD off (black screen).
Makes use of already defined 'BACKLIGHT_OFF_ALPHA'.
Change-Id: I9b0fc79b8d50c29e024ba1e6d9c2501119a7e0e0
This patch is relevant for targets with a transflective display.
If the backlight was set to "always off" (e.g. to use the lcd
in a pure passive way), and the sleep timer ran off, the LCD
would stay disabled and didn't wake up when a button is pressed.
Change-Id: I0a157c7f421d9fc4c7d8ba903f2cf93f6cef51d0
This allows targets to automatically switch audio settings when the
line out is plugged/unplugged.
Only hooked up on the xDuoo X3, but there are other potential users.
Change-Id: Ic46a329bc955cca2e2ad0335ca16295eab24ad59
New amounts:
7.50K main stack
0.75K irq stack
Prior values of 8K+1K overflowed IRAM by ~660 bytes on Onda 7x7 targets,
but worked on the xDuoo X3.
(The discrepancy is due to the Onda targets having more LCD code shoved
into IRAM.)
Change-Id: I16fcfae3c5f3e36db688dfa9167b620584e79df8
Original patch by Alexander Spyridakis
Modified by Steve Bavin and Igor Poretsky
Keymap fixes by Marianne Arnold
Change-Id: I5a252d97d2b05c533e048931f7354f4261f76499
Patch taken from Igor Poretsky's tree.
Original clip-radio-tick.patch modified to acts only when screen is
deemed, or when recording, in order to preserve indicators
functionality.
Change-Id: I62afb24a0dad7ad2ecc9272c24810b37f032408d
Unifies time formatting in settings_list.c allows time format to
display as HH:MM:SS.MSS or any consecutive combination thereof
(hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss)
works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING'
Time is auto-ranged dependent on value
Adds talk_time_intervals to allow time values to be spoken similar to
display format: x Hours, x Minutes, x Seconds, x Milliseconds
Table lookups merged or removed from recording, clip meter and lcd timeout
-String_Choice replaced with TABLE_SETTING or INT_SETTING for these
functions as well, cleaned-up cfg_vals that get saved to cfgfile
RTL Languages ARE supported
Negative values ARE supported
Backlight on/off are now Always and Never to share formatter with LCD
Timeout
Added flag to allow ranged units to be locked to a minimum index
Added flag to allow leading zero to be supressed from the largest unit
merged talk_time_unit() and talk_time_intervals()
optimized time_split()
optimized format_time_auto()
Backlight time-out list same as original
Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd
__builtin found fix for rbendian.h
tools/configure defines SIM_USE_BYTESWAP_H if byteswap.h is found in
/usr/include/ maybe there is a better mechanism for this
Change-Id: I4d004e68313e8b32aa5587582be36bc459fdaf6b
__builtin found fix for rbendian.h
tools/configure defines SIM_USE_BYTESWAP_H if byteswap.h is found in
/usr/include/ maybe there is a better mechanism for this
genshortcut.sh is a simple script to make .desktop shortcut files
several newer distros don't allow you to run the simulator from the
file manager, this or perhaps a different method can probably be
included while building a sim at a later date.
for now it can be run manually like so:
similar to ../tools/configure
run from your simulator folder
../tools/genshortcut.sh exepath shortname icon
ex. ../tools/genshortcut.sh ./rockboxui clip+sim music-app
Change-Id: Ia05d3a9349b27c5968a4a7a68b2eb480e60faec3
when precision is not specified memchr recieved -1 for count
count is unsigned so it looks in a potentially very large area
for a terminator and returns this whole area if \0 is not found
Instead we should use memchr when precision is specified
and if precision is not specified use strlen
Fixes 60+Mb Config.cfg files
Change-Id: Ic4d1439334588f999c9071235430c42df2af5cc4
is_diacritic is used for pretty much all of the text display sizing
Timing here matters, so important it uses a
priority buffer in order to cut down on searching the database.
This patch is verified functionally equlivalent but
saves 80 bytes and is ~20% faster for the clip+ I tested it on
Several things were done:
Optimizing the copy loop for the priority buffer
Globbing some operations together
but the main one has to do with the database structure its self
--
Rather than a bit packed struct it combines the lower 8 bytes into
one value [info] and uses flags to access the values instead
Change-Id: I475073419b647639ef1eeaa3b9213e4e1067c0db
* Fully Interrupt-driven, with proper task yielding
* Much more robust error handling
* Eliminate duplicate code
* Pile of bugfixes
(Much of this adapted from Igor Poretsky's tree)
Change-Id: I46006412323cba2088b70094635d62a241be1d7e
