Only done for files shared across multiple targets
Note that several targets share the same CONFIG_LCD but use completely
different drivers
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31285 a1c6a512-1295-4272-9138-f99709370657
add a comment about why we don't return 0 when no tuner was detected
build the file on all as3525v2 targets
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31284 a1c6a512-1295-4272-9138-f99709370657
pcf5060*.c has the same name than the RTC driver, but it's not the RTC driver itself
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31280 a1c6a512-1295-4272-9138-f99709370657
tuner and rtcs are already included by CONFIG_TUNER and CONFIG_RTC
It's not possible to remove all duplicates, because some models must support 2 RTCs.
a bitfield could be used instead, like is done for CONFIG_TUNER
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31279 a1c6a512-1295-4272-9138-f99709370657
This should prevent buffer underruns that can occur during heavy use of buttons or scrollwheel.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31267 a1c6a512-1295-4272-9138-f99709370657
fix another mistake introduced in r31222
usb-drv-as3525v2 additionally sets bit DEPCTL_usbactep in this function.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31266 a1c6a512-1295-4272-9138-f99709370657
0x00200000 is DEPCTL_stall, not DEPCTL_naksts
the function names should have been a strong indication..
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31265 a1c6a512-1295-4272-9138-f99709370657
output pins were not correct
xor pin readout with initial value (reversed between the 2 clips)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31255 a1c6a512-1295-4272-9138-f99709370657
use 0, 1, 3 as input endpoints instead of 0, 3, 5 (0, 1, 3, 5 doesn't work)
use a helper to know the number of endpoints (could be hardcoded since we have 3 input and 3 outputs)
previous check was not correct (sizeof(if?a:b))
change endpoint reset/request
set packet size at enumdone interrupt
we don't have isochronous or interrupt endpoints, remove that table
reverse usb_drv_transfer direction argument (in -> out)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31251 a1c6a512-1295-4272-9138-f99709370657
usb_drv_request_endpoint() would return an endpoint with the other direction
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31248 a1c6a512-1295-4272-9138-f99709370657
DIEPINT_timeout and DOEPINT_setup are the same bit
Use separate cases so the code is more clear
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31242 a1c6a512-1295-4272-9138-f99709370657
Merge clipv1/clipv2 code since they use the same 3x3 matrix
clipzip keyscan buttons now work in bootloader
clipplus untouched (no matrix)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31235 a1c6a512-1295-4272-9138-f99709370657
fuze+: reset the controller for all lcd types, should fix the "CRT effet"
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31234 a1c6a512-1295-4272-9138-f99709370657
code, especially init sequence, is much more similar to usb-s3c6400x.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31231 a1c6a512-1295-4272-9138-f99709370657
