The Echo R1 is a new open-hardware music player design, based
on the STM32H743 microcontroller. Schematics and hardware
documentation for it can be found here:
- https://github.com/amachronic/echoplayer
This is an incomplete port. The bootloader can be loaded using
OpenOCD and it can draw to the LCD using SPI. SDRAM is working
but hasn't been extensively tested.
Change-Id: Ifd2bee15c49868fbc989683d3ca14dce48bf3e18
Currently, only the development bootloader can be built successfully.
This is a part of the large iPod Nano 3G and iPod Nano 4G support patch.
Credit: Cástor Muñoz <cmvidal@gmail.com>
Change-Id: I74ea0da999ddb1d8ce5d0f5434141b3f0b5f7448
This handles the case where the host sends a new setup packet
in the middle of an ongoing control transfer.
Change-Id: I1d2e02467e9b813c9827cc0699cb87a500515e31
IMHO the current name is somewhat misleading:
- usb_drv_send() is blocking and we have usb_drv_send_nonblocking()
for the non-blocking case. This inconsistent naming can only
promote confusion. (And what would we call a blocking receive?)
- Other hardware abstraction APIs in Rockbox are usually blocking:
storage, LCD, backlight, audio... in other words, blocking is the
default expected behavior, with non-blocking calls being a rarity.
Change-Id: I05b41088d09eab582697674f4f06fdca0c8950af
This only required a minor patch to the usb-designware driver due
to DMA requiring physical addresses -- on the X1000, these differ
from virtual addresses so we have to do the usual conversion.
Both the mass storage and HID drivers work, but there are a few
issues so this can't be considered 100% stable yet.
- Mass storage might not be detected properly on insertion,
and USB has to be replugged before it shows up
- HID driver may occasionally panic or hang the machine
Change-Id: Ia3ce7591d5928ec7cbca7953abfef01bdbd873ef
