FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
- change buffer alignement to 32 bytes (not sure if it's useful)
- flush rx fifo on reset
- use AS3525_PHYSICAL_ADDR for DMA
- reset endpoints structure states on reset
- force full speed for debugging purpose
- add more debugging code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27986 a1c6a512-1295-4272-9138-f99709370657
Seperate make rules in a almost empty android.make.
Also add forgotten powermgmt-android.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27977 a1c6a512-1295-4272-9138-f99709370657
Instead implement a bit of battery monitoring. Currently it only fetches the battery level (in %) every 30s,
but it could do more like battery status, charger connected, voltage...
Theoretically, we could also exit/quit after some time of inactivity too
(perhaps not a bad idea since Rockbox puts a slight but still non-zero CPU load even if doing nothing).
Ironically, Rockbox is now the only way to get the exact battery level (at least I haven't found anything yet) on my phone :-)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27974 a1c6a512-1295-4272-9138-f99709370657
Use host's functions for file i/o directly (open(), close() ,etc.), not the sim_* variants.
Some dir functions need to be wrapped still because we need to cache the parents dir's path (host's dirent doesn't let us know).
For the same reason (incompatibility) with host's dirent) detach some members from Rockbox' dirent struct and put it into an extra one,
the values can be retrieved via the new dir_get_info().
Get rid of the sim_ prefix for sleep as well and change the signature to unix sleep().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27968 a1c6a512-1295-4272-9138-f99709370657
Since memory on 32mb ipod videos is mapped twice, a 64mb build still has codecs and plugins mapped in a usable area. This means that all that needs to be done to support 32mb and 64mb boards with the same build is to adjust audiobufend to avoid using more than the actually present RAM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27960 a1c6a512-1295-4272-9138-f99709370657
Without this change the backlight would be enabled but the screen would
show the last content displayed before the screen went off
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27957 a1c6a512-1295-4272-9138-f99709370657
This is the first step to allowing a single build which will work on any ipodvideo.
A global variable, probed_ramsize, is initialised to either 32 or 64 early in boot.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27937 a1c6a512-1295-4272-9138-f99709370657
ata-meg-fx: use unsigned line number, so % (modulo) is optimized
tcc7*: use proper printf format and remove casting
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27935 a1c6a512-1295-4272-9138-f99709370657
The driver is stable so we can use error codes for debugging
Fix 2 problems in error code path:
- release sd mutex
- release dma module when needed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27915 a1c6a512-1295-4272-9138-f99709370657
fix DMA buffers when the src/dst is in IRAM
It worked fine because all the buffers are in DRAM, and the virtual
address happens to be the physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27876 a1c6a512-1295-4272-9138-f99709370657
(USB stack is not used by default)
This makes debugging the USB driver easier
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27847 a1c6a512-1295-4272-9138-f99709370657
Users will have to reboot to OF manually or to power off, and then plug USB
No message is displayed because usb_detect() is run from a tick
This lacks documentation but should be OK for Unstable devices, and
will hopefully prevent clueless users from opening their devices and
breaking them definitely, instead of waiting for the battery to power
off.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27837 a1c6a512-1295-4272-9138-f99709370657
* Forward Java KeyEvents to C layer and translate them to Rockbox BUTTON_*.
* Add a basic Android keymap
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27832 a1c6a512-1295-4272-9138-f99709370657
Stop explicitely if a call comes in, and resume playback (if it was playing before the call) upon hang up.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27746 a1c6a512-1295-4272-9138-f99709370657
this greatly reduces CPU load. lcd_update_rect shoves a bit as well.
CPU usage with Rockbox in background is between 3% (with a 200kbps vbr mp3) and 12% (320kbps cbr mp3), so it's low but still dependent on codecs and even particular files.
Driving a WPS with peakmeter, e.g. the builtin one, adds about 30% cpu usage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27689 a1c6a512-1295-4272-9138-f99709370657
the activity only attaches to the framebuffer for displaying it. An icon
in the notification area is displayed (it could be prettier I guess).
Note: Some HTC phones won't, includng mine, get enough CPU time to do background decoding
fluently, see: http://code.google.com/p/android/issues/detail?id=9663
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27686 a1c6a512-1295-4272-9138-f99709370657
