If the corrections file is not present on the target, then
fall back to the (probably outdated) compile-time builtin version.
Change-Id: I9904b81b2f3737149fc8a905ecd03ff54782bbdf
Before we only fell back for manuals and fonts, whereas
we also needed to fall back for source and voices. Given that
dev builds only produce the actual binaries, just fall back for
everything else.
Change-Id: Ibd84a942d380f69c86ca2243cb2c192de7efd047
Support hw4 units with AXP2101 PMU
Bootloader successfully compiles and loads onto device.
The LCD appears to be identical to hw3 units.
Scroll wheel and buttons work
Audio output works, including volume.
HP/LO detect works
Rockbox build is generic
GPIO gating logic seems to be working as intended now.
- Added new GPIO definitions - some significant overlaps with pins
from previous hardware revisions...
- Added some GPIO definitions for older players we didn't know about
- Add register definitions for AXP2101 from datasheet
(these are very different from AXP192!)
- Add AXP2101 regulator definitions, need to support multiple step
sizes per regulator.
- Verify AXP2101 voltage set multi-range logic
- Verify AXP2101 voltage get multi-range logic
- Make AXP2101 its own driver
- AXP2101 driver should be "minimally viable", though I think
there is some extra functionality that could be implemented.
- Disabling the coulomb counter stuff - we could maybe make
the E-Gauge work for the same purpose, but it only appears to
be used on the debug screen at the moment so it doesn't seem
like it's worth the effort.
- Found new button GPIOs
- Found error in my GPIO setting logic, blue light works now!
- Set LDO/DCDC output voltages to OF's settings, as far as
I can tell.
- Determined we probably want TCS1421_CFG1:0 to be 0x00,
for UFP behavior
- Tested this rb build with both old and new bootloaders on hw1.5,
hw2, hw4 in as many configurations as I can think of, works across
the board.
- Bootloader can install itself on hw4, so nand chip isn't novel
- Uninstallation file can be made by patcher script, works on hw4
- Installation file can be made by patcher script, works on hw4
- Added HW4 to rbutil, manual
Change-Id: I5b75782273e81c2c6f2b9c79501c8b7cbf88391f
- Give each brand its own entry, and make ranges
of OF versions correspond to hardware changes.
- Temporarily disabled target aigoerosq.
- Post-install hint enabled.
- Added pre-install hint function
- Added optional parameter themename, in case
the target name does not match the themesite name.
- Made Port Status (statusAsString()) only care about platform
string prior to first '.'
- Manual: Remove note that rbutil does not support this model
Issues:
- Cannot uninstall the bootloader - manual instructions are available
Change-Id: I574aad7943ea3d1e543e9449f68240446fec0709
VOICE_INVALID_VOICE_FILE and VOICE_LANG_NAME need to be discretely
saved as "InvalidVoice_<langname>.talk" and "<langname>.lng.talk"
under the target .rockbox/langs directory
This mirrors what the standalone voice.pl and buildzip.pl do.
Change-Id: I70fda4ffe85b5bccc164ebcbb484eedf034f143b
original xrick code by 'BigOrno' at:
http://www.bigorno.net/xrick/
Rockbox port, plus bugfixes at:
https://github.com/pierluigi-vicinanza/xrick
Further changes:
* Additonal fixes from g#3026
* Port to modern plugin API
* Add Pluginlib keymap fallback
* Support all >1bpp screens
* Fix build warnings in miniz
* Better error message when resources are missing
Change-Id: Id83928bc2539901b0221692f65cbca41389c58e7
QuaZIP is included in several major Linux distributions and packaging
policies strongly oppose bundling of libraries.
Change-Id: I8d454784dc4b244f4dd8aa18deb3350a29aaab77
Don't change the abort button to Ok after a successful bootloader
install, this will be done by the following steps.
Change-Id: I4275de1f44bddf0580b10b36240a36a43daa68d0
No need to show a separate entry when a cached file has been used, do it
the same way as bootloader downloads do.
Change-Id: I42a21a37474a778975e82af0102e0152677a0343
Loading the information can take a bit depending on the speed of the
disk. To make the application not appear as frozen update the UI more
often, and display a "Loading" text during data retrieval.
Change-Id: I012487d031ea71e62b583ca1c40220ea709e7034
Don't store the "Install Themes" option. Automatically enable themes
installation if the themes selection has at least one entry selected
instead.
Change-Id: Ib46e8b53b0204555b79dea51545dd7c380f003ff
Avoid constructing the bootloader file path in the caller. Pass filename
list and mountpoint separately so it can directly fall back to the
mountpoint.
Change some functions to use references instead of creating temporary
objects.
Change-Id: I09c9d755553a32de3d02a42a8ce1fcb94f831b2a
Reworking handling of player specific data (static player configuration,
as well as information retrieved from the server) changed the behaviour
on a non-present configuration entry. This eventually caused the
mountpoint not being set for players that don't have a bootloader file
on disk. Fixing this accidentially removed the default-if-not-found
handling for the bootloader file.
Restore the old default value behaviour for both cases.
Change-Id: I627782ccdef198619fb507f8b09a64811b3bd18f
- When uninstalling update the log file only at the end of removing all
files. This gives a major speed improveness since othewise the log
file is written after each file. This slows down things notably,
especially on slow disks.
- Explicitly update the UI during install zip extraction. Avoids
progress seemingly hanging due to the UI not getting updated often
enough.
Change-Id: Ib353a92e02a7038d6e55f5f88dcfb5085602c0f2
When uninstalling parts with lots of small files the process can take
quite some time. Update the progress accordingly.
Change-Id: Iecc4553b36abbc1cf9652a325ccb29b62a7fc4cc
We only use it for playing the TTS sample so it's not too important.
Since this is a separate Qt module it might not be installed, so make it
optional.
Change-Id: I2c91dd5d587c8a984525b2297bbe7d597b816b4f
During bootloader installation sansapatcher disk access is accidentially
set up twice. This is not a problem except on Windows, which will abort
with a "permission denied" error.
This is basically the same problem as for ipodpatcher bootloader install.
Change-Id: I03220e17d0e00a15fff23c02aba7da93d4781964
During bootloader installation ipodpatcher disk access is accidentially
set up twice. This is not a problem except on Windows, which will abort
with a "permission denied" error.
Change-Id: I9a835ef0d49f24df741b7b2909c4bd87cb1c8341
It seems Qt6 doesn't require explicit linking to QSvgIconPlugin anymore,
and cmake has trouble finding it. On native Windows builds it isn't
required, so remove it.
Change-Id: I87651f51ab212511947ab9fca3297b0dff276577
Qt6 has QMultimedia, but QSound has been removed. It's only use for
playing a TTS test sample. Disable that for now.
Change-Id: Id3b5c834f9579a43e390c0c00a4c1a35b59182bd
- Fix regexp case insensitive option being inverted.
- Pass more objects by reference.
- Some const-ness.
Change-Id: I1c77ad22ab1e505c8dce8c083d9c52e76a6860be
