This mirrors the behavior of idle poweroff,
which inhibits shutdown as long as a charger
is plugged in, even if a device is capable
of powering off while charging.
Since usb_inserted() already checks for USB_POWERED,
certain devices with the ability to power off while
charging, already exhibit this behavior when using
the sleep timer anyway.
Change-Id: I35ed4b542a8a4df06a34395c85f4d37fc1d2ce53
when battery_bench is run
exports a file in the rockbox directory called 'battery_levels.default'
if the user wants their own levels they can rename the file battery_levels.cfg
and it will be loaded at boot
some minimal error checking is performed prior to using the values
added manual entry
Change-Id: Ia0126faced0c7229fcf8385a1bcb584b5a9dc378
Responding to the bug report posted by iPodVT:
https://forums.rockbox.org/index.php/topic,55180.msg255292
- An active sleep timer that runs out will now cause the
player to shut down regardless of playback state
- When playback state is paused or stopped, once the
idle timer has run out, player will shut down, regardless
of any running sleep timer
Change-Id: I33de682a63ed1db76174eb2394ef5568f37cc677
Use AXP2101's egauge battery percent level if available (hw4 units).
If not available (_battery_level() will return -1 on hw1-hw3 units),
fall back to voltage battery level.
Also fix logic in axp2101_battery_status()
Change-Id: Ic300418532dae6f7772fff8bf5e2b32516f3b973
In rare cases, battery voltage at boot can be below the shutdown
threshold even if a charger is plugged in. This triggers a forced
shutdown and tells you to "RECHARGE!" despite there being plenty
of power available, which is annoying.
Tweak the forced shutdown check so it accounts for external power
sources; if any are present, battery voltage will be ignored.
Change-Id: Id6280b0b666df9eef31c37a03c07c9d6d3f50221
CURRENT_USB overrides CURRENT_NORMAL when USB is plugged.
It defaults to 2 mA and wasn't defined on any target, but
this doesn't make sense to me. After all, the current
drawn by the CPU or other components won't change just
because USB was plugged in.
As far as I can tell, the only side effect of removing
this is reducing the estimated USB charging current.
This might mean CURRENT_MAX_CHG should be increased by
CURRENT_NORMAL on some (all?) targets to compensate,
but I'm not sure which targets would be affected.
Change-Id: I5aa5c3893ae1e4ce6b8803ab4e8c897d534eb08f
Allow a clean shutdown to end in either power off or reboot. Add a
new event SYS_REBOOT to signal it and sys_reboot() to trigger the
event. SYS_REBOOT signals a reboot request and should be listened
for alongside SYS_POWEROFF events.
Change-Id: I99ba7fb5feed2bb5a0a40a274e8466ad74fe3a43
Guard against division by zero and prevent the time_now
value from going negative if the counter drops below zero.
Change-Id: Ia8cadfe76086d6d0200964c1f27bab0be708b135
This method, while far from perfect, is able to make use of
real-time battery usage information and updates frequently
in fine-grained increments. This should make time estimates
a lot more useful than they previously were.
Change-Id: I66c6daba88210f60a27e239fbbcc56869be3b878
This reverts commit 6ff1a935b9.
Reason: it created a mismatch between the displayed voltage
and percent since the voltage was unfiltered but percentage
was based off the filtered voltage.
Change-Id: I4cba099f2e1edf0ef7c4e17a32f566aa66f5b933
I've tried to clean up cruft and clarify what's being
done, prior to adding new features. The behavior should
be unchanged.
Change-Id: If8a68b7b48173d283df981a21cdd854b714e7695
Create a new battery_current() function to report the
the battery's charging/discharging current. Move the
old runcurrent() implementation into it and clean up
some of the related defines.
Change-Id: I7dbe5b6532d291fa72add1cb23b30e3cbac8c3ca
Remove battery_read_info() which is a simple wrapper
function only used by debug screens. Use the polling
functions directly to save a bit of code size.
Change-Id: I2919f78105bab186f6933dc1823f9fa67fe74f3e
- Don't include the 'battery capacity' setting unless the
target allows changing it.
- Clean up the preprocessor conditionals used to check for
variable battery capacity support.
- Don't use a variable for battery capacity unless it is
actually needed.
Change-Id: I3d8a338f107014f2c5098bc0a44ef0cfb4df9356
Give iBasso DX50/DX90 empty adc-target.h headers like all
the other hosted targets to avoid special cases.
Change-Id: Iaae15642fdec4ff18bc9ac01245753135128f676
Appears to return 0 until the axp has (presumably) completed
its first real measurement.
Note about erosq: keep the power_inint() delay large to ensure
nothing breaks in the bootloader for the time being.
Change-Id: I444e858207cc401c42f1e6ceacf067ad543d4ff8
Make it possible for target to provide voltage, percentage and time to
empty values. The voltage measurement is nice to have in debug menu even
if the actions are taken only based on percentage. Perform battery level
estimation based on voltage only if percentage is not available.
Use time to empty based on actual power consumption. This makes the
estimated runtime displayed in Rockbox Info to react to backlight
setting. The bq27000 updates time to empty estimate every 5.12 seconds
so it is possible to see the estimate with backlight off on the screen
if user enters Rockbox Info, activates hold switch, waits 11 seconds and
releases the hold switch.
Change-Id: Iafe3fa0fb334e3428e3a0ad05b2c020d208dc934
In the old position of the call, the first battery reading would
be made before initializing the target's power management code.
If the target needs to initialize before giving a battery reading,
then the first reading would be wrong and the power thread might
inappropriately shut down based on a false zero reading.
The new position avoids forcing special-case logic onto the target
power management code.
Change-Id: I483cfabe30c6881d80a1094fd526fa0065523d19
This means we will no longer send them routinely and instead rely on
the HID driver to send them when the host requests it. This also
moves the reporting out of the power management code where it probably
did not belong in the first place.
Change-Id: I9c8420e81897f1f6caaa55ffacc7525589f1ef75
This allows rockbox to report its battery status through the
HID Battery Strength method that is available through the
Device Controls usage page.
Change-Id: Ia7a7dd9b9d476dd9df5a5f5becabc5ae823e9a89
This makes it so the thread cached variable is only read if building
the regular firmware. For bootloaders the data is now read directly.
This fixes the functions for bootloaders so they do not have to import
the power management code just so these functions will work when in
the bootloader.
Change-Id: Ic425b02c08b48df7a11a6c19c022b0e1cb316a85
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
Cleaned up, rebased, and forward-ported from the xvortex fork.
(original credit to vsoftster@gmail.com)
Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Reorganization
- Separated iBasso devices from PLATFORM_ANDROID. These are now standlone
hosted targets. Most device specific code is in the
firmware/target/hosted/ibasso directory.
- No dependency on Android SDK, only the Android NDK is needed.
32 bit Android NDK and Android API Level 16.
- Separate implementation for each device where feasible.
Code cleanup
- Rewrite of existing code, from simple reformat to complete reimplementation.
- New backlight interface, seperating backlight from touchscreen.
- Rewrite of device button handler, removing unneeded code and fixing memory
leaks.
- New Debug messages interface logging to Android adb logcat (DEBUGF, panicf,
logf).
- Rewrite of lcd device handler, removing unneeded code and fixing memory leaks.
- Rewrite of audiohw device handler/pcm interface, removing unneeded code and
fixing memory leaks, enabling 44.1/48kHz pthreaded playback.
- Rewrite of power and powermng, proper shutdown, using batterylog results
(see http://gerrit.rockbox.org/r/#/c/1047/).
- Rewrite of configure (Android NDK) and device specific config.
- Rewrite of the Android NDK specific Makefile.
Misc
- All plugins/games/demos activated.
- Update tinyalsa to latest from https://github.com/tinyalsa/tinyalsa.
Includes
- http://gerrit.rockbox.org/r/#/c/993/
- http://gerrit.rockbox.org/r/#/c/1010/
- http://gerrit.rockbox.org/r/#/c/1035/
Does not include http://gerrit.rockbox.org/r/#/c/1007/ due to new backlight
interface and new option for hold switch, touchscreen, physical button
interaction.
Rockbox needs the iBasso DX50/DX90 loader for startup, see
http://gerrit.rockbox.org/r/#/c/1099/
The loader expects Rockbox to be installed in /mnt/sdcard/.rockbox/. If
/mnt/sdcard/ is accessed as USB mass storage device, Rockbox will exit
gracefully and the loader will restart Rockbox on USB disconnect.
Tested on iBasso DX50.
Compiled (not tested) for iBasso DX90.
Compiled (not tested) for PLATFORM_ANDROID.
Change-Id: I5f5e22e68f5b4cf29c28e2b40b2c265f2beb7ab7
Either by mistake or because its meaning changed, usb_powered() doesn't mean
what the name suggest, so clarify its meaning by renaming it to usb_powered_only.
So use of usb_powered() are replaced by usb_inserted() when it makes more sense.
Change-Id: I112887e2d8560e84587bee5f55c826dde8c806d8
Reviewed-on: http://gerrit.rockbox.org/1097
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The port to for this two targets has been entirely developped by Ilia Sergachev (alias Il or xzcc). His source
can be found at https://bitbucket.org/isergachev/rockbox . The few necesary modifications for the DX90 port
was done by headwhacker form head-fi.org. Unfortunately i could not try out the final state of the DX90 port.
The port is hosted on android (without java) as standalone app. The official Firmware is required to run this port.
Ilia did modify the source files for the "android" target in the rockbox source to make the DX port work. The work I did
was to separate the code for DX50 (&DX90) from the android target.
On this Target Ilia used source from tinyalsa from AOSP. I did not touch that part of the code because I do not understand it.
What else I changed from Ilias sources besides the separation from the target "android":
* removed a dirty hack to keep backlight off
* changed value battery meter to voltage battery meter
* made all plugins compile (named target as "standalone") and added keymaps
* i added the graphics for the manual but did not do anything else for the manual yet
* minor optimizations
known bugs:
* timers are slowed donw when playback is active (tinyalsa related?)
* some minor bugs
Things to do:
* The main prolem will be how to install the app correctly. A guy called DOC2008 added a CWM (by androtab.info) to the
official firmware and Ilia made a CWM installation script and a dualboot selector (rbutils/ibassoboot, build with
ndk-build). We will have to find a way to install rockbox in a proper way without breaking any copyrights.
Maybe ADB is an option but it is not enable with OF by default. Patching the OF is probably the way to go.
* All the wiki and manual
to build:
needed: android ndk installed, android sdk installed with additional build-tools 19.1.0 installed
./tools/configure
select iBasso DX50 or iBasso DX90
make -j apk
the content of rockbox.zip/.rockbox needs to be copied to /system/rockbox/app_rockbox/rockbox/ (rockbox app not needed)
the content of libs/armeabi to /system/rockbox/lib/ (rockbox app needed)
The boot selector is needed as /system/bin/MangoPlayer and the iBasso app as /system/bin/MangoPlayer_original. There
is also the "vold" file. The one from OF does not work with DX50 rockbox (DX90 works!?), the one from Ilia is necessary.
Until we have found a proper way to install it, it can only be installed following the instructions of Ilia on his
bitbucket page, using the CWM-OF and his installation script package.
Change-Id: Ic4faaf84824c162aabcc08e492cee6e0068719d0
Reviewed-on: http://gerrit.rockbox.org/941
Tested: Chiwen Chang <rock1104.tw@yahoo.com.tw>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Make set_sleep_timer a static function and only call
set_sleeptimer_duration externally, which is always called with minutes
values.
Change-Id: I985308bf014e354f91c47a0b2bf62f4f5a591919
Reviewed-on: http://gerrit.rockbox.org/327
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
The debug screen gets un-smoothed battery status via battery_read_info().
The level and runtime that is normally presented to the user needs to be
based on smoothed voltage.
Change-Id: Icb448853973aa1d5832e9094176938cfa12b2e48
