rbutil: add mpio hd200 as disabled target (all untested)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26561 a1c6a512-1295-4272-9138-f99709370657

rbutil/rbutilqt/base/bootloaderinstallbase.cpp

@@ -29,6 +29,7 @@
 #include "bootloaderinstallchinachip.h"
 #include "bootloaderinstallams.h"
 #include "bootloaderinstalltcc.h"
+#include "bootloaderinstallmpio.h"
 #include "utils.h"
 
 #if defined(Q_OS_MACX)
@@ -64,6 +65,9 @@ BootloaderInstallBase* BootloaderInstallBase::createBootloaderInstaller(QObject*
     else if(type == "tcc") {
         return new BootloaderInstallTcc(parent);
     }
+    else if(type == "mpio") {
+        return new BootloaderInstallMpio(parent);
+    }
     else {
         return NULL;
     }
@@ -212,7 +216,7 @@ QString BootloaderInstallBase::postinstallHints(QString model)
                 "<li>After the firmware has been updated reboot your player.</li>");
     }
     if(model == "iaudiox5" || model == "iaudiom5"
-            || model == "iaudiox5v" || model == "iaudiom3") {
+            || model == "iaudiox5v" || model == "iaudiom3" || model == "mpioh200") {
         hint = true;
         msg += tr("<li>Turn the player off</li>"
                 "<li>Insert the charger</li>");
@@ -224,7 +228,6 @@ QString BootloaderInstallBase::postinstallHints(QString model)
                 "<li>Toggle the battery switch on the player</li>"
                 "<li>Hold <i>Power</i> to boot into Rockbox</li>");
     }
-
     msg += "</ol>";
     msg += tr("<p><b>Note:</b> You can safely install other parts first, but "
             "the above steps are <b>required</b> to finish the installation!</p>");

rbutil/rbutilqt/base/bootloaderinstallmpio.cpp

@@ -0,0 +1,140 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ *
+ *   Copyright (C) 2008 by Dominik Wenger
+ *   $Id: bootloaderinstallams.cpp 24778 2010-02-19 23:45:29Z funman $
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include <QtCore>
+#include "bootloaderinstallbase.h"
+#include "bootloaderinstallmpio.h"
+
+#include "../mkmpioboot/mkmpioboot.h"
+
+BootloaderInstallMpio::BootloaderInstallMpio(QObject *parent)
+        : BootloaderInstallBase(parent)
+{
+}
+
+QString BootloaderInstallMpio::ofHint()
+{
+    return tr("Bootloader installation requires you to provide "
+              "a firmware file of the original firmware (bin file). "
+              "You need to download this file yourself due to legal "
+              "reasons. Please refer to the "
+              "<a href='http://www.rockbox.org/manual.shtml'>manual</a> and "
+              "the <a href='http://www.rockbox.org/wiki/MPIOHD200Port'>MPIOHD200Port</a> "
+              "wiki page on how to obtain this file.<br/>"
+              "Press Ok to continue and browse your computer for the firmware "
+              "file.");
+}
+
+bool BootloaderInstallMpio::install(void)
+{
+    if(m_offile.isEmpty())
+        return false;
+        
+    qDebug() << "[BootloaderInstallMpio] installing bootloader";
+    
+    // download firmware from server
+    emit logItem(tr("Downloading bootloader file"), LOGINFO);
+    
+    connect(this, SIGNAL(downloadDone()), this, SLOT(installStage2()));
+    downloadBlStart(m_blurl);
+    
+    return true;
+}
+
+void BootloaderInstallMpio::installStage2(void)
+{    
+    qDebug() << "[BootloaderInstallMpio] installStage2";
+    
+    int origin = 0xe0000;   /* MPIO HD200 bootloader address */
+    
+    m_tempfile.open();
+    QString bootfile = m_tempfile.fileName();
+    m_tempfile.close();
+    
+    int ret = mkmpioboot(m_offile.toLocal8Bit().data(), bootfile.toLocal8Bit().data(), m_blfile.toLocal8Bit().data(), origin);
+    
+    if(ret != 0)
+    {
+        QString error;
+        switch(ret)
+        {
+            case -1:
+                error = tr("Could not open the original firmware.");
+                break;
+            case -2:
+                error = tr("Could not read the original firmware.");
+                break;
+            case -3:
+                error = tr("Loaded firmware file does not look like MPIO OF file.");
+                break;
+            case -4:
+                error = tr("Could not open downloaded bootloader.");
+                break;
+            case -5:
+                error = tr("Place for bootloader in OF file not empty.");
+                break;
+            case -6:
+                error = tr("Could not read the downloaded bootloader.");
+                break;
+            case -7:
+                error = tr("Bootloader checksum error.");
+                break;
+            case -8:
+                error = tr("Could not open outputfile.");
+                break;
+            case -9:
+                error = tr("Could not write outputfile.");
+                break;
+            default:
+                error = tr("Unknown errornumber: %1").arg(ret);
+                break;
+        }
+    
+        qDebug() << tr("Patching original firmware failed: %1").arg(error);
+        emit logItem(tr("Patching original firmware failed: %1").arg(error), LOGERROR);
+        emit done(true);
+        return;
+    }
+  
+    //end of install
+    qDebug() << "[BootloaderInstallMpio] install successfull";
+    emit logItem(tr("Success: modified firmware file created"), LOGINFO);
+    logInstall(LogAdd);
+    emit done(false);
+    return;
+}
+
+bool BootloaderInstallMpio::uninstall(void)
+{
+    emit logItem(tr("To uninstall, perform a normal upgrade with an unmodified "
+                    "original firmware"), LOGINFO);
+    logInstall(LogRemove);
+    return false;
+}
+
+BootloaderInstallBase::BootloaderType BootloaderInstallMpio::installed(void)
+{
+    return BootloaderUnknown;
+}
+
+BootloaderInstallBase::Capabilities BootloaderInstallMpio::capabilities(void)
+{
+    return (Install | NeedsOf);
+}
+

rbutil/rbutilqt/base/bootloaderinstallmpio.h

@@ -0,0 +1,43 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ *
+ *   Copyright (C) 2008 by Dominik Wenger
+ *   $Id: bootloaderinstallams.h 22317 2009-08-15 13:04:21Z Domonoky $
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef BOOTLOADERINSTALLMPIO_H
+#define BOOTLOADERINSTALLMPIO_H
+
+#include <QtCore>
+#include "bootloaderinstallbase.h"
+
+//! bootloader installation derivate based on mkmpioboot
+class BootloaderInstallMpio : public BootloaderInstallBase
+{
+    Q_OBJECT
+    public:
+        BootloaderInstallMpio(QObject *parent);
+        bool install(void);
+        bool uninstall(void);
+        BootloaderInstallBase::BootloaderType installed(void);
+        Capabilities capabilities(void);
+        QString ofHint();
+
+    private:
+        
+    private slots:
+        void installStage2(void);
+};
+
+#endif

rbutil/rbutilqt/rbutil.ini

@@ -65,6 +65,7 @@ platform71=samsungyh920
 platform72=samsungyh925
 platform73=cowond2
 platform80=vibe500
+platform90=mpiohd200
 
 [archosplayer]
 name="Jukebox Player 6000 / Jukebox Studio 5 / 10 / 20"
@@ -618,6 +619,19 @@ usberror=0x04098039
 configure_modelname=vibe500
 encoder=rbspeex
 
+[mpiohd200]
+name="MPIO HD200"
+buildserver_modelname=mpiohd200
+bootloadermethod=mpio
+bootloadername=/mpiohd200/bootloader.mpio
+bootloaderfile=/System/HD200_UPG.SYS
+manualname=
+brand=MPIO
+usbid=0x27351004
+configure_modelname=mpiohd200
+encoder=rbspeex
+status=disabled
+
 [05ac1240]
 name="Apple Ipod Nano (Second Generation, DFU Mode)"
 

rbutil/rbutilqt/rbutilqt.cpp

@@ -43,7 +43,7 @@
 #include "progressloggerinterface.h"
 
 #include "bootloaderinstallbase.h"
-
+#include "bootloaderinstallmpio.h"
 
 #if defined(Q_OS_LINUX)
 #include <stdio.h>

rbutil/rbutilqt/rbutilqt.pri

@@ -67,6 +67,7 @@ SOURCES += \
  base/bootloaderinstallchinachip.cpp \
  base/bootloaderinstallams.cpp \
  base/bootloaderinstalltcc.cpp \
+ base/bootloaderinstallmpio.cpp \
  base/rockboxinfo.cpp \
  ../../tools/mkboot.c \
  ../../tools/iriver.c \
@@ -133,6 +134,7 @@ HEADERS += \
  base/bootloaderinstallchinachip.h \
  base/bootloaderinstallams.h \
  base/bootloaderinstalltcc.h \
+ base/bootloaderinstallmpio.h \
  base/rockboxinfo.h \
  ../../tools/mkboot.h \
  ../../tools/iriver.h \

rbutil/rbutilqt/rbutilqt.pro

@@ -63,8 +63,11 @@ libmkamsboot.commands = @$(MAKE) \
 libmktccboot.commands = @$(MAKE) \
         TARGET_DIR=$$MYBUILDDIR -C $$RBBASE_DIR/rbutil/mktccboot \
         libmktccboot$$RBLIBPOSTFIX CC=\"$$QMAKE_CC\"
-QMAKE_EXTRA_TARGETS += rbspeex libucl libmkamsboot libmktccboot
+libmkmpioboot.commands = @$(MAKE) \
-PRE_TARGETDEPS += rbspeex libucl libmkamsboot libmktccboot
+        TARGET_DIR=$$MYBUILDDIR -C $$RBBASE_DIR/rbutil/mkmpioboot \
+        libmkmpioboot$$RBLIBPOSTFIX CC=\"$$QMAKE_CC\"
+QMAKE_EXTRA_TARGETS += rbspeex libucl libmkamsboot libmktccboot libmkmpioboot
+PRE_TARGETDEPS += rbspeex libucl libmkamsboot libmktccboot libmkmpioboot
 
 # rule for creating ctags file
 tags.commands = ctags -R --c++-kinds=+p --fields=+iaS --extra=+q $(SOURCES)
@@ -86,7 +89,7 @@ INCLUDEPATH += $$RBBASE_DIR/rbutil/ipodpatcher $$RBBASE_DIR/rbutil/sansapatcher
 
 DEPENDPATH = $$INCLUDEPATH
 
-LIBS += -L$$OUT_PWD -L$$MYBUILDDIR -lrbspeex -lmkamsboot -lmktccboot -lucl
+LIBS += -L$$OUT_PWD -L$$MYBUILDDIR -lrbspeex -lmkamsboot -lmktccboot -lmkmpioboot -lucl
 
 # check for system speex. Add a custom rule for pre-building librbspeex if not
 # found. Newer versions of speex are split up into libspeex and libspeexdsp,