Add more information to the battery debug screen for Nano2G

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24723 a1c6a512-1295-4272-9138-f99709370657

apps/debug_menu.c

@@ -1648,6 +1648,28 @@ static bool view_battery(void)
 #elif defined(IPOD_NANO2G)
                 y = pmu_read_battery_current();
                 lcd_putsf(0, 2, "Battery current: %d mA", y);
+                lcd_putsf(0, 3, "PWRCON: %8x", PWRCON);
+                lcd_putsf(0, 4, "PWRCONEXT: %8x", PWRCONEXT);
+                x = pmu_read(0x1b) & 0xf;
+                y = pmu_read(0x1a) * 25 + 625;
+                lcd_putsf(0, 5, "AUTO: %x / %d mV", x, y);
+                x = pmu_read(0x1f) & 0xf;
+                y = pmu_read(0x1e) * 25 + 625;
+                lcd_putsf(0, 6, "DOWN1: %x / %d mV", x, y);
+                x = pmu_read(0x23) & 0xf;
+                y = pmu_read(0x22) * 25 + 625;
+                lcd_putsf(0, 7, "DOWN2: %x / %d mV", x, y);
+                x = pmu_read(0x27) & 0xf;
+                y = pmu_read(0x26) * 100 + 900;
+                lcd_putsf(0, 8, "MEMLDO: %x / %d mV", x, y);
+                for (i = 0; i < 6; i++)
+                {
+                    x = pmu_read(0x2e + (i << 1)) & 0xf;
+                    y = pmu_read(0x2d + (i << 1)) * 100 + 900;
+                    lcd_putsf(0, 9 + i, "LDO%d: %x / %d mV", i + 1, x, y);
+                }
+                lcd_putsf(0, 15, "CLKCON: %8x", CLKCON);
+                lcd_putsf(17, 15, "PLL0: %6x", PLL0PMS);
 #else
                 lcd_putsf(0, 3, "Charger: %s",
                          charger_inserted() ? "present" : "absent");

apps/plugins/SOURCES

@@ -179,3 +179,14 @@ md5sum.c
 #ifdef USB_ENABLE_HID
 remote_control.c
 #endif
+
+test_codec.c
+test_core_jpeg.c
+test_disk.c
+test_fps.c
+test_gfx.c
+test_mem_jpeg.c
+test_resize.c
+test_sampr.c
+test_scanrate.c
+test_viewports.c

apps/plugins/battery_bench.c

@@ -30,7 +30,7 @@ PLUGIN_HEADER
 #define EV_EXIT 1337
 
 /* seems to work with 1300, but who knows... */ 
-#define THREAD_STACK_SIZE DEFAULT_STACK_SIZE + 0x200
+#define THREAD_STACK_SIZE DEFAULT_STACK_SIZE + 0x1200
 
 #if CONFIG_KEYPAD == RECORDER_PAD
 

apps/plugins/doom/doom.make

@@ -10,7 +10,7 @@
 DOOMSRCDIR := $(APPSDIR)/plugins/doom
 DOOMBUILDDIR := $(BUILDDIR)/apps/plugins/doom
 
-ROCKS += $(DOOMBUILDDIR)/doom.rock
+#ROCKS += $(DOOMBUILDDIR)/doom.rock
 
 DOOM_SRC := $(call preprocess, $(DOOMSRCDIR)/SOURCES)
 DOOM_SRC += $(ROOTDIR)/firmware/common/sscanf.c

apps/plugins/plugin.lds

@@ -142,8 +142,8 @@ OUTPUT_FORMAT(elf32-littlemips)
 
 #elif CONFIG_CPU==S5L8700
 #define DRAMORIG 0x08000000
-#define IRAMORIG (0x00000000 + (64*1024))
+#define IRAMORIG (0x00000000 + (128*1024))
-#define IRAMSIZE (64*1024)
+#define IRAMSIZE (128*1024)
 
 #elif CONFIG_CPU==S5L8701
 #define DRAMORIG 0x08000000

bootloader/ipodnano2g.c

@@ -84,8 +84,8 @@ void fatal_error(void)
     }
 }
 
-/* aes_decrypt() and readfw() functions taken from iloader - (C)
+/* aes_decrypt() and readfw() functions taken from iLoader.
-   Michael Sparmann and licenced under GPL v2 or later. 
+   (C) Michael Sparmann and licenced under GPL v2 or later. 
 */
 
 static void aes_decrypt(void* data, uint32_t size)

firmware/panic.c

@@ -32,7 +32,7 @@
 #include "system.h"
 
 static char panic_buf[128];
-#define LINECHARS (LCD_WIDTH/SYSFONT_WIDTH)
+#define LINECHARS (LCD_WIDTH/SYSFONT_WIDTH) - 2
 
 /*
  * "Dude. This is pretty fucked-up, right here." 

firmware/target/arm/s5l8700/app.lds

@@ -28,7 +28,7 @@ STARTUP(target/arm/s5l8700/crt0.o)
 #define DRAMSIZE (DRAM_SIZE - STUBOFFSET - PLUGINSIZE - CODECSIZE)
 #define CODECORIG (ENDAUDIOADDR)
 #if CONFIG_CPU==S5L8700
-#define IRAMSIZE (64*1024)  /* 128KB total - 64KB for core, 64KB for plugins */
+#define IRAMSIZE (128*1024)  /* 256KB total - 128KB for core, 128KB for plugins */
 #else /* S5L8701 */
 #define IRAMSIZE (96*1024)  /* 176KB total - 96KB for core, 80KB for plugins */
 #endif
@@ -108,7 +108,7 @@ SECTIONS
        stackbegin = .;
        _stackbegin = .;
 #ifdef IPOD_NANO2G
-       . += 0x4000;
+       . += 0x2000;
 #endif
        . += 0x2000;
        stackend = .;

firmware/target/arm/s5l8700/crt0.S

@@ -260,64 +260,64 @@ start_loc:
 
 #if defined(MEIZU_M6SP) || defined(MEIZU_M3)
     /* setup SDRAM for Meizu M6SP */
-    ldr r1, =0x38200000
+    ldr r1, =0x38200000
-    // configure SDR drive strength and pad settings
+    // configure SDR drive strength and pad settings
     mov r0, #SDR_DSS_SEL_B
-    str r0, [r1, #0x4C] // MIU_DSS_SEL_B
+    str r0, [r1, #0x4C] // MIU_DSS_SEL_B
     mov r0, #SDR_DSS_SEL_O
-    str r0, [r1, #0x50] // MIU_DSS_SEL_O
+    str r0, [r1, #0x50] // MIU_DSS_SEL_O
     mov r0, #SDR_DSS_SEL_C
-    str r0, [r1, #0x54] // MIU_DSS_SEL_C
+    str r0, [r1, #0x54] // MIU_DSS_SEL_C
-    mov r0, #2
+    mov r0, #2
-    str r0, [r1, #0x60] // SSTL2_PAD_ON
+    str r0, [r1, #0x60] // SSTL2_PAD_ON
-    // select SDR mode
+    // select SDR mode
     ldr r0, [r1, #0x40]
-    mov r2, #0xFFFDFFFF
+    mov r2, #0xFFFDFFFF
-    and r0, r0, r2
+    and r0, r0, r2
-    orr r0, r0, #1
+    orr r0, r0, #1
-    str r0, [r1, #0x40] // MIUORG
+    str r0, [r1, #0x40] // MIUORG
     // set controller configuration
     mov r0, #SDR_CONFIG
     str r0, [r1]        // MIUCON
-    // set SDRAM timing
+    // set SDRAM timing
     ldr r0, =SDR_TIMING
-    str r0, [r1, #0x10] // MIUSDPARA
+    str r0, [r1, #0x10] // MIUSDPARA
-    // set refresh rate
+    // set refresh rate
-    mov r0, #0x1080
+    mov r0, #0x1080
-    str r0, [r1, #0x08] // MIUAREF
+    str r0, [r1, #0x08] // MIUAREF
-    // initialise SDRAM 
+    // initialise SDRAM 
-    mov r0, #0x003
+    mov r0, #0x003
-    str r0, [r1, #0x04] // MIUCOM = nop
+    str r0, [r1, #0x04] // MIUCOM = nop
-    ldr r0, =0x203
+    ldr r0, =0x203
-    str r0, [r1, #0x04] // MIUCOM = precharge all banks
+    str r0, [r1, #0x04] // MIUCOM = precharge all banks
-    nop
+    nop
-    nop
+    nop
-    nop
+    nop
-    ldr r0, =0x303
+    ldr r0, =0x303
-    str r0, [r1, #0x04] // MIUCOM = auto-refresh
+    str r0, [r1, #0x04] // MIUCOM = auto-refresh
-    nop
+    nop
-    nop
+    nop
-    nop
+    nop
-    nop
+    nop
-    str r0, [r1, #0x04] // MIUCOM = auto-refresh
+    str r0, [r1, #0x04] // MIUCOM = auto-refresh
-    nop
+    nop
-    nop
+    nop
-    nop
+    nop
-    nop
+    nop
-    str r0, [r1, #0x04] // MIUCOM = auto-refresh
+    str r0, [r1, #0x04] // MIUCOM = auto-refresh
-    nop
+    nop
-    nop
+    nop
-    nop
+    nop
-    nop
+    nop
-    // set mode register
+    // set mode register
     mov r0, #SDR_MRS
-    str r0, [r1, #0x0C] // MIUMRS
+    str r0, [r1, #0x0C] // MIUMRS
-    ldr r0, =0x103
+    ldr r0, =0x103
-    str r0, [r1, #0x04] // MIUCOM = mode register set
+    str r0, [r1, #0x04] // MIUCOM = mode register set
     ldr r0, =SDR_EMRS
-    str r0, [r1, #0x0C] // MIUMRS
+    str r0, [r1, #0x0C] // MIUMRS
-    ldr r0, =0x103
+    ldr r0, =0x103
-    str r0, [r1, #0x04] // MIUCOM = mode register set
+    str r0, [r1, #0x04] // MIUCOM = mode register set
 #endif /* MEIZU_M6SP */
 
     mov r1, #0x1

firmware/target/arm/s5l8700/debug-s5l8700.c

@@ -92,6 +92,9 @@ bool __dbg_ports(void)
         _DEBUG_PRINTF("GPIO 11: %08x",(unsigned int)PDAT11);
         _DEBUG_PRINTF("GPIO 13: %08x",(unsigned int)PDAT13);
         _DEBUG_PRINTF("GPIO 14: %08x",(unsigned int)PDAT14);
+        _DEBUG_PRINTF("5USEC  : %08x",(unsigned int)FIVE_USEC_TIMER);
+        _DEBUG_PRINTF("USEC   : %08x",(unsigned int)USEC_TIMER);
+        _DEBUG_PRINTF("USECREG: %08x",(unsigned int)(*(REG32_PTR_T)(0x3C700084)));
 
         lcd_update();
         if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))

firmware/target/arm/s5l8700/ipodnano2g/power-nano2g.c

@@ -48,7 +48,7 @@ void power_off(void)
 
 void power_init(void)
 {
-    /* TODO */
+    pmu_write(0x1e, 15);  /* Vcore = 1.000V */
 }
 
 #if CONFIG_CHARGING