devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Samsung YP-S3: update backlight brightness curve so backlight is still on at the minimum brightness setting

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22103 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Bertrik Sikken 2009-08-01 18:53:29 +00:00
parent 1b2fe50f3d
commit e454d88b88
1 changed files with 18 additions and 16 deletions
Download patch file Download diff file Expand all files Collapse all files

34
firmware/target/arm/s5l8700/yps3/backlight-yps3.c
View file

@ -37,22 +37,27 @@
void _backlight_set_brightness(int brightness) void _backlight_set_brightness(int brightness)
{ {
/* pwm = (sqrt(2)**x)-1, where brightness level x = 0..16 */ /* pwm = round(sqrt(2)**x), where brightness level x = 1..16 */
static const unsigned char logtable[] = static const unsigned int logtable[] =
{0, 1, 2, 3, 5, 7, 10, 15, 22, 31, 44, 63, 90, 127, 180, 255}; {1, 2, 3, 4, 6, 8, 11, 16, 23, 32, 45, 64, 91, 128, 181, 256};
/* set PWM width */ /* set PWM width */
TADATA0 = 255 - logtable[brightness]; TADATA0 = logtable[brightness];
} }
void _backlight_on(void) void _backlight_on(void)
{ {
/* configure backlight pin P0.0 as timer PWM output */
PCON0 = ((PCON0 & ~(3 << 0)) | (2 << 0));
_backlight_set_brightness(backlight_brightness); _backlight_set_brightness(backlight_brightness);
} }
void _backlight_off(void) void _backlight_off(void)
{ {
_backlight_set_brightness(MIN_BRIGHTNESS_SETTING); /* configure backlight pin P0.0 as GPIO and switch off */
PCON0 = ((PCON0 & ~(3 << 0)) | (1 << 0));
PDAT0 &= ~(1 << 0);
} }
void _buttonlight_on(void) void _buttonlight_on(void)
@ -73,22 +78,19 @@ bool _backlight_init(void)
PCON3 = (PCON3 & ~0x0000FF00) | 0x00001100; PCON3 = (PCON3 & ~0x0000FF00) | 0x00001100;
PCON4 = (PCON4 & ~0x00000F00) | 0x00000100; PCON4 = (PCON4 & ~0x00000F00) | 0x00000100;
/* enable backlight pin as timer output */
PCON0 = ((PCON0 & ~(3 << 0)) | (2 << 0));
/* enable timer clock */ /* enable timer clock */
PWRCON &= ~(1 << 4); PWRCON &= ~(1 << 4);
/* configure timer */ /* configure timer */
TACMD = (1 << 1); /* TC_CLR */ TACMD = (1 << 1); /* TA_CLR */
TACON = (0 << 13) | /* TC_INT1_EN */ TACON = (0 << 13) | /* TA_INT1_EN */
(0 << 12) | /* TC_INT0_EN */ (0 << 12) | /* TA_INT0_EN */
(0 << 11) | /* TC_START */ (1 << 11) | /* TA_START */
(3 << 8) | /* TC_CS = PCLK / 64 */ (3 << 8) | /* TA_CS = PCLK / 64 */
(1 << 4); /* TC_MODE_SEL = PWM mode */ (1 << 4); /* TA_MODE_SEL = PWM mode */
TADATA1 = 255; /* set PWM period */ TADATA1 = 256; /* set PWM period */
TAPRE = 20; /* prescaler */ TAPRE = 20; /* prescaler */
TACMD = (1 << 0); /* TC_EN */ TACMD = (1 << 0); /* TA_EN */
_backlight_on(); _backlight_on();