1) Use a separate config-<target>.h for Zen Vision(:M) (60GB)

2) Other unrelated cleanups


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17503 a1c6a512-1295-4272-9138-f99709370657

apps/debug_menu.c

@@ -2426,7 +2426,7 @@ static bool dbg_isp1583(void)
 }
 #endif
 
-#ifdef CREATIVE_ZVM
+#ifdef CREATIVE_ZVx
 extern int pic_dbg_num_items(void);
 extern char* pic_dbg_item(int selected_item, void *data, char *buffer, size_t buffer_len);
 
@@ -2527,7 +2527,7 @@ static const struct the_menu_item menuitems[] = {
 #if CONFIG_USBOTG == USBOTG_ISP1583
         { "View ISP1583 info", dbg_isp1583 },
 #endif
-#ifdef CREATIVE_ZVM
+#ifdef CREATIVE_ZVx
         { "View PIC info", dbg_pic },
 #endif
 #ifdef ROCKBOX_HAS_LOGF

firmware/SOURCES

@@ -716,7 +716,7 @@ target/arm/tms320dm320/mrobe-500/usb-mr500.c
 #endif /* SIMULATOR */
 #endif /* MROBE_500 */
 
-#ifdef CREATIVE_ZVM
+#ifdef CREATIVE_ZVx
 #ifndef SIMULATOR
 target/arm/ata-as-arm.S
 target/arm/lcd-as-memframe.S
@@ -731,7 +731,7 @@ target/arm/tms320dm320/creative-zvm/power-creativezvm.c
 target/arm/tms320dm320/creative-zvm/powermgmt-creativezvm.c
 target/arm/tms320dm320/creative-zvm/usb-creativezvm.c
 #endif /* SIMULATOR */
-#endif /* CREATIVE_ZVM */
+#endif /* CREATIVE_ZVx */
 
 #ifdef MROBE_100
 #ifndef SIMULATOR

firmware/common/disk.c

@@ -68,7 +68,7 @@ struct partinfo* disk_init(IF_MV_NONVOID(int drive))
 #endif
 
     ata_read_sectors(IF_MV2(drive,) 0,1, &sector);
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
     /* check that the boot sector is initialized */
     if ( (sector[510] != 0x55) ||
          (sector[511] != 0xaa)) {
@@ -187,7 +187,7 @@ int disk_mount(int drive)
     {
         return 0;
     }
-#if defined(TOSHIBA_GIGABEAT_S) ||defined(CREATIVE_ZVM)
+#if defined(TOSHIBA_GIGABEAT_S) || defined(CREATIVE_ZVx)
     int i = 1;  /* For the Gigabeat S, we mount the second partition */
 #else
     int i = 0;

firmware/drivers/audio/tlv320.c

@@ -59,7 +59,7 @@ int tenthdb2master(int db)
 }
 
 /* local functions and definations */
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
 #define TLV320_ADDR 0x34
 #else
 #define TLV320_ADDR 0x1A
@@ -118,10 +118,10 @@ void audiohw_init(void)
     audiohw_mute(true);
     tlv320_write_reg(REG_AAP, AAP_DAC | AAP_MICM);
     tlv320_write_reg(REG_DAP, 0x00);  /* No deemphasis */
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
     tlv320_write_reg(REG_DAIF, DAIF_IWL_16 | DAIF_FOR_I2S);
 #else
-    tlv320_write_reg(REG_DAIF, DAIF_IWL_16 | DAIF_FOR_DSP);
+    tlv320_write_reg(REG_DAIF, DAIF_IWL_32 | DAIF_FOR_DSP);
 #endif
     tlv320_write_reg(REG_DIA, DIA_ACT);
     audiohw_set_frequency(-1); /* default */

firmware/export/config-creativezv.h

@@ -0,0 +1,166 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 by Maurus Cuelenaere
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/*
+ * This config file is for the Creative Zen Vision
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define CONFIG_SDRAM_START 0x00900000
+
+#define CREATIVE_ZV 1
+
+/* This makes it part of the Creative Zen Vision family :) */
+#define CREATIVE_ZVx 1
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 28
+
+/* define this if you use an ATA controller */
+#define HAVE_ATA
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if the target has volume keys which can be used in the lists */
+//#define HAVE_VOLUME_IN_LIST
+
+/* LCD dimensions */
+#define CONFIG_LCD LCD_CREATIVEZVM
+
+/* choose the lcd orientation. both work */
+#define CONFIG_ORIENTATION SCREEN_PORTRAIT
+
+#define LCD_WIDTH  640
+#define LCD_HEIGHT 480
+
+#define LCD_DEPTH  16   /* 65k colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+/* Define this if your LCD can be enabled/disabled */
+#define HAVE_LCD_ENABLE
+
+#define CONFIG_KEYPAD CREATIVEZVM_PAD
+#define HAS_BUTTON_HOLD
+#define HAVE_HEADPHONE_DETECTION
+//#define HAVE_TOUCHPAD
+
+#define CONFIG_I2C  I2C_DM320
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+//#define CONFIG_RTC RTC_RX5X348AB
+
+/* Define this for LCD backlight available */
+//#define HAVE_BACKLIGHT
+
+//#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* Main LCD backlight brightness range and defaults */
+//#define MIN_BRIGHTNESS_SETTING          0
+//#define MAX_BRIGHTNESS_SETTING          127
+//#define DEFAULT_BRIGHTNESS_SETTING      85 /* OF "full brightness" */
+//#define DEFAULT_DIMNESS_SETTING         22 /* OF "most dim" */
+
+/* Define this if you have a software controlled poweroff */
+//#define HAVE_SW_POWEROFF
+//TODO: enable this back
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x80000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x100000
+
+/* Define this if you have the TLV320 audio codec -> controlled by the DSP */
+#define HAVE_TLV320
+
+#define CONFIG_I2C I2C_DM320
+
+/* TLV320 has no tone controls, so we use the software ones */
+#define HAVE_SW_TONE_CONTROLS
+
+/*#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
+    SAMPR_CAP_11)*/
+
+#define BATTERY_CAPACITY_DEFAULT 1250 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 500        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 2500        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 100         /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+/* Hardware controlled charging with monitoring */
+//#define CONFIG_CHARGING CHARGING_MONITOR
+
+#ifndef SIMULATOR
+
+/* Define this if you have a TI TMS320DM320 */
+#define CONFIG_CPU DM320
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x400000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 16934400
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* define this if the backlight can be set to a brightness */
+//#define __BACKLIGHT_INIT
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* Define this if you have adjustable CPU frequency */
+/* #define HAVE_ADJUSTABLE_CPU_FREQ */
+
+#define BOOTFILE_EXT "zv"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define CONFIG_USBOTG	USBOTG_ISP1583
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x041e 
+#define USB_PRODUCT_ID 0x4133
+
+#endif /* SIMULATOR */

firmware/export/config-creativezvm.h

@@ -26,6 +26,9 @@
 
 #define CREATIVE_ZVM 1
 
+/* This makes it part of the Creative Zen Vision family :) */
+#define CREATIVE_ZVx 1
+
 /* For Rolo and boot loader */
 #define MODEL_NUMBER 26
 
@@ -56,13 +59,8 @@
 /* choose the lcd orientation. both work */
 #define CONFIG_ORIENTATION SCREEN_PORTRAIT
 
-#ifdef ZEN_VISION
-#define LCD_WIDTH  640
-#define LCD_HEIGHT 480
-#else
 #define LCD_WIDTH  320
 #define LCD_HEIGHT 240
-#endif
 
 #define LCD_DEPTH  16   /* 65k colours */
 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
@@ -156,13 +154,7 @@
 /* Define this if you have adjustable CPU frequency */
 /* #define HAVE_ADJUSTABLE_CPU_FREQ */
 
-#ifdef ZEN_VISION
+#define BOOTFILE_EXT "zvm"
- #define BOOTFILE_EXT "zv"
-#elseif defined(ZVM_60GB)
- #define BOOTFILE_EXT "zvm60"
-#else
- #define BOOTFILE_EXT "zvm"
-#endif
 #define BOOTFILE "rockbox." BOOTFILE_EXT
 #define BOOTDIR "/.rockbox"
 

firmware/export/config-creativezvm60gb.h

@@ -0,0 +1,168 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 by Maurus Cuelenaere
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/*
+ * This config file is for the Creative Zen Vision:M 60GB
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define CONFIG_SDRAM_START 0x00900000
+
+#define CREATIVE_ZVM60GB 1
+
+/* This makes it part of the Creative Zen Vision family :) */
+#define CREATIVE_ZVx 1
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 27
+
+/* define this if you use an ATA controller */
+#define HAVE_ATA
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if the target has volume keys which can be used in the lists */
+//#define HAVE_VOLUME_IN_LIST
+
+/* LCD dimensions */
+#define CONFIG_LCD LCD_CREATIVEZVM
+
+/* choose the lcd orientation. both work */
+#define CONFIG_ORIENTATION SCREEN_PORTRAIT
+
+#define LCD_WIDTH  320
+#define LCD_HEIGHT 240
+
+#define LCD_DEPTH  16   /* 65k colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+/* Define this if your LCD can be enabled/disabled */
+#define HAVE_LCD_ENABLE
+
+#define CONFIG_KEYPAD CREATIVEZVM_PAD
+#define HAS_BUTTON_HOLD
+#define HAVE_HEADPHONE_DETECTION
+//#define HAVE_TOUCHPAD
+
+#define CONFIG_I2C  I2C_DM320
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+//#define CONFIG_RTC RTC_RX5X348AB
+
+/* Define this for LCD backlight available */
+//#define HAVE_BACKLIGHT
+
+//#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* Main LCD backlight brightness range and defaults */
+//#define MIN_BRIGHTNESS_SETTING          0
+//#define MAX_BRIGHTNESS_SETTING          127
+//#define DEFAULT_BRIGHTNESS_SETTING      85 /* OF "full brightness" */
+//#define DEFAULT_DIMNESS_SETTING         22 /* OF "most dim" */
+
+/* Define this if you have a software controlled poweroff */
+//#define HAVE_SW_POWEROFF
+//TODO: enable this back
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x80000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x100000
+
+/* Define this if you have the TLV320 audio codec -> controlled by the DSP */
+#define HAVE_TLV320
+
+#define CONFIG_I2C I2C_DM320
+
+/* TLV320 has no tone controls, so we use the software ones */
+#define HAVE_SW_TONE_CONTROLS
+
+/*#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
+    SAMPR_CAP_11)*/
+
+#define BATTERY_CAPACITY_DEFAULT 1250 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 500        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 2500        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 100         /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+/* Hardware controlled charging with monitoring */
+//#define CONFIG_CHARGING CHARGING_MONITOR
+
+#ifndef SIMULATOR
+
+/* Define this if you have a TI TMS320DM320 */
+#define CONFIG_CPU DM320
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x400000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 16934400
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* define this if the backlight can be set to a brightness */
+//#define __BACKLIGHT_INIT
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* Define this if you have adjustable CPU frequency */
+/* #define HAVE_ADJUSTABLE_CPU_FREQ */
+
+#define BOOTFILE_EXT "zvm60"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#if 0
+#define CONFIG_USBOTG	USBOTG_ISP1761
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x041e 
+#define USB_PRODUCT_ID 0x4133
+#endif
+
+#endif /* SIMULATOR */

firmware/export/config.h

@@ -253,6 +253,10 @@
 #include "config-cowond2.h"
 #elif defined(CREATIVE_ZVM)
 #include "config-creativezvm.h"
+#elif defined(CREATIVE_ZVM60GB)
+#include "config-creativezvm60gb.h"
+#elif defined(CREATIVE_ZV)
+#include "config-creativezv.h"
 #else
 /* no known platform */
 #endif

firmware/export/tlv320.h

@@ -111,7 +111,7 @@ extern void audiohw_set_headphone_vol(int vol_l, int vol_r);
 
 /* REG_SRC: Sample Rate Control */
 #define REG_SRC         0x8
-#define SRC_CLKIN       (1 << 6)    /* Clock input divider                          */ 
+#define SRC_CLKIN       (1 << 6)    /* Clock input divider                          */
 #define SRC_CLKOUT      (1 << 7)    /* Clock output divider                         */
 /*#define SRC_SR        ()*/
 #define SRC_BOSR        (1 << 1)    /* Base oversampling rate, depends on SRC_USB   */

firmware/kernel.c

@@ -435,8 +435,8 @@ void sleep(int ticks)
     unsigned stop = USEC_TIMER + ticks * (1000000/HZ);
     while (TIME_BEFORE(USEC_TIMER, stop))
         switch_thread();
-#elif defined(CREATIVE_ZVM) && defined(BOOTLOADER)
+#elif defined(CREATIVE_ZVx) && defined(BOOTLOADER)
-    // hacky..
+    /* hacky.. */
 	long sleep_ticks = current_tick + ticks + 1;
     while (sleep_ticks > current_tick)
         switch_thread();

firmware/panic.c

@@ -123,7 +123,7 @@ void panicf( const char *fmt, ...)
 #elif CONFIG_KEYPAD == ONDIO_PAD
         if (!(PCDR & 0x0008))
 #endif /* CONFIG_KEYPAD */
-#elif defined(CREATIVE_ZVM)
+#elif defined(CREATIVE_ZVx)
         if(false)
 #endif /* CPU */
             system_reboot();

firmware/target/arm/ata-as-arm.S

@@ -33,7 +33,7 @@
     /* Untested */
     .text
     .equ    .ata_port, 0x18000000
-#elif defined(CREATIVE_ZVM)
+#elif defined(CREATIVE_ZVx) /* Zen Vision could have an other address */
     .text
     .equ    .ata_port, 0x50FEE000
 #endif

firmware/target/arm/tms320dm320/creative-zvm/pic-creativezvm.c

@@ -25,10 +25,14 @@
 #include "button-target.h"
 #include "i2c-dm320.h"
 
+#define BUTTON_DEBUG
+
+#ifdef BUTTON_DEBUG
 #include "lcd-target.h"
 #include "lcd.h"
 #include "sprintf.h"
 #include "font.h"
+#endif
 
 #ifndef ZEN_VISION
 /* Creative Zen Vision:M */
@@ -189,7 +193,6 @@ void GIO0(void)
     if(tick_diff >= TICK_MIN && tick_diff <= TICK_MAX)
     {
         /* Ignore this, as it is a hold event */
-        IO_INTC_IRQ1 = INTR_IRQ1_EXT0;
         return;
     }
     last_btn = btn_press;
@@ -271,8 +274,8 @@ void GIO0(void)
 #endif
 }
 
-void send_command_to_pic(unsigned char in, unsigned char* out,
+void send_command_to_pic(const unsigned char in, unsigned char* out,
-                         unsigned int length)
+                         const unsigned int length)
 {
     /* Disable GIO0 interrupt */
     IO_INTC_EINT1 &= ~INTR_EINT1_EXT0;

firmware/target/arm/tms320dm320/crt0.S

@@ -153,7 +153,7 @@ start:
     msr    cpsr_c, #0xd3
     ldr    sp, =stackend
     
-#if defined(BOOTLOADER) && !defined(CREATIVE_ZVM)
+#if defined(BOOTLOADER) && !defined(CREATIVE_ZVx)
     /* get the high part of our execute address */
     ldr    r2, =0xffffff00
     and    r4, pc, r2

firmware/target/arm/tms320dm320/debug-dm320.c

@@ -34,7 +34,7 @@ bool __dbg_ports(void)
     return false;
 }
 
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
 extern char r_buffer[5];
 extern int r_button;
 #endif
@@ -42,7 +42,7 @@ bool __dbg_hw_info(void)
 {
     int line = 0, oldline;
 	int button;
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
     int *address=0x0;
 #endif
     bool done=false;
@@ -103,14 +103,14 @@ bool __dbg_hw_info(void)
 					lcd_puts(0, line++, " Unknown DM320 Chip ID");
 	}
 
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
     line++;
 #endif
     oldline=line;
     while(!done)
     {
         line = oldline;
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
         button = button_get(false);
         button&=~BUTTON_REPEAT;
         if (button == BUTTON_POWER)
@@ -145,7 +145,7 @@ bool __dbg_hw_info(void)
         lcd_puts(0, line++, "[Rockbox info]");
         snprintf(buf, sizeof(buf), "current tick: %08x Seconds running: %08d",
             (unsigned int)current_tick, (unsigned int)current_tick/100);  lcd_puts(0, line++, buf);
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
         snprintf(buf, sizeof(buf), "Address: 0x%08x Data: 0x%08x", 
             (unsigned int)address, *address);           lcd_puts(0, line++, buf);
         snprintf(buf, sizeof(buf), "Address: 0x%08x Data: 0x%08x",

firmware/target/arm/tms320dm320/spi-dm320.c

@@ -43,7 +43,7 @@ struct SPI_info {
 
 struct SPI_info spi_targets[] =
 {
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
     [SPI_target_TSC2100]   = { &IO_GIO_BITCLR1, &IO_GIO_BITSET1, GIO_TS_ENABLE },
     [SPI_target_RX5X348AB] = { &IO_GIO_BITSET0, &IO_GIO_BITCLR0, GIO_RTC_ENABLE},
     [SPI_target_BACKLIGHT] = { &IO_GIO_BITCLR1, &IO_GIO_BITSET1, GIO_BL_ENABLE },
@@ -106,7 +106,7 @@ void spi_init(void)
     IO_SERIAL0_MODE |= IO_SERIAL0_MODE_SCLK;
     /* Enable TX */
     IO_SERIAL0_TX_ENABLE = 0x0001;
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
     /* Set GIO 18 to output for touch screen slave enable */
     IO_GIO_DIR1 &= ~GIO_TS_ENABLE;
     /* Set GIO 12 to output for rtc slave enable */

firmware/target/arm/tms320dm320/spi-target.h

@@ -24,7 +24,7 @@
 #include <stdbool.h>
 
 enum SPI_target {
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
     SPI_target_TSC2100 = 0,
     SPI_target_RX5X348AB,
     SPI_target_BACKLIGHT,

firmware/target/arm/tms320dm320/system-dm320.c

@@ -24,7 +24,7 @@
 #include "uart-target.h"
 #include "system-arm.h"
 #include "spi.h"
-#ifdef CREATIVE_ZVM
+#ifdef CREATIVE_ZVx
 #include "dma-target.h"
 #endif
 
@@ -224,7 +224,7 @@ void system_init(void)
     IO_TIMER2_TMMD = CONFIG_TIMER2_TMMD_STOP;
     IO_TIMER3_TMMD = CONFIG_TIMER3_TMMD_STOP;
 
-#ifndef CREATIVE_ZVM
+#ifndef CREATIVE_ZVx
     /* set GIO26 (reset pin) to output and low */
     IO_GIO_BITCLR1=(1<<10);
     IO_GIO_DIR1&=~(1<<10);
@@ -233,7 +233,7 @@ void system_init(void)
     uart_init();
     spi_init();
     
-#ifdef CREATIVE_ZVM
+#ifdef CREATIVE_ZVx
     dma_init();
 #endif
  
@@ -245,8 +245,8 @@ void system_init(void)
     map_section(CONFIG_SDRAM_START, CONFIG_SDRAM_START, MEM, CACHE_ALL);
     /* enable buffered writing for the framebuffer */
     map_section((int)FRAME, (int)FRAME, 1, BUFFERED);
-#ifdef CREATIVE_ZVM
+#ifdef CREATIVE_ZVx
-    //mimic OF
+    /* mimic OF */
     map_section(0x00100000, 0x00100000,  4, CACHE_NONE);
     map_section(0x04700000, 0x04700000,  2,   BUFFERED);
     map_section(0x40000000, 0x40000000, 16, CACHE_NONE);

firmware/usb.c

@@ -48,7 +48,7 @@
 /* Conditions under which we want the entire driver */
 #if !defined(BOOTLOADER) || \
      (defined(TOSHIBA_GIGABEAT_S) && defined(USE_ROCKBOX_USB) && defined(USB_STORAGE)) || \
-     (defined(CREATIVE_ZVM) && defined(HAVE_USBSTACK))
+     (defined(CREATIVE_ZVx) && defined(HAVE_USBSTACK))
 #define USB_FULL_INIT
 #endif
 

tools/checkwps/targets.txt

@@ -27,6 +27,8 @@ MROBE_500 mrobe500
 MROBE_100 mrobe100
 LOGIK_DAX logikdax
 CREATIVE_ZVM creativezvm
+CREATIVE_ZVM60GB creativezvm60
+CREATIVE_ZV creativezv
 SANSA_E200 e200
 SANSA_E200 e200r
 SANSA_C200 c200

tools/configure

@@ -1453,7 +1453,7 @@ fi
     t_model="logikdax"
     ;;
 	
-    90|creativezvm)
+    90|creativezvm30gb)
     target_id=35
     modelname="creativezvm"
     target="-DCREATIVE_ZVM"
@@ -1480,7 +1480,7 @@ fi
     91|creativezvm60gb)
     target_id=40
     modelname="creativezvm"
-    target="-DCREATIVE_ZVM -DZVM_60GB"
+    target="-DCREATIVE_ZVM60GB"
     memory=64
     arm926ejscc
     bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
@@ -1504,7 +1504,7 @@ fi
     92|creativezenvision)
     target_id=39
     modelname="creativezm"
-    target="-DCREATIVE_ZVM -DZEN_VISION"
+    target="-DCREATIVE_ZV"
     memory=64
     arm926ejscc
     bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"