devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Dave Chapman 2008-10-12 16:46:01 +00:00
parent 0f933f6210
commit da8bff107e
20 changed files with 1372 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

3
bootloader/SOURCES
View file

@ -39,4 +39,7 @@ meizu_m3.c
ondavx747.c ondavx747.c
#elif defined(CREATIVE_ZVx) #elif defined(CREATIVE_ZVx)
creativezvm.c creativezvm.c
#elif defined(HAVE_AS3525)
sansa_as3525.c
show_logo.c
#endif #endif

58
bootloader/sansa_as3525.c Normal file
View file

@ -0,0 +1,58 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id:$
*
* Copyright (C) 2008 by Rafaël Carré
*
* Based on Rockbox iriver bootloader by Linus Nielsen Feltzing
* and the ipodlinux bootloader by Daniel Palffy and Bernard Leach
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include <stdio.h>
#include <system.h>
#include <inttypes.h>
#include "lcd.h"
#include "common.h"
#include "config.h"
int show_logo(void);
void main(void)
{
lcd_init_device();
lcd_clear_display();
lcd_update();
lcd_enable(true);
show_logo();
#ifdef SANSA_CLIP
/* Use hardware scrolling */
lcd_write_command(0x26); /* scroll setup */
lcd_write_command(0x01); /* columns scrolled per step */
lcd_write_command(0x00); /* start page */
lcd_write_command(0x00); /* steps freqency */
lcd_write_command(0x07); /* end page (including) */
lcd_write_command(0x2F); /* start horizontal scrolling */
#endif
/* never returns */
while(1) ;
}

6
bootloader/show_logo.c
View file

@ -29,8 +29,12 @@
int show_logo( void ) int show_logo( void )
{ {
char boot_version[32]; char boot_version[32];
#if LCD_WIDTH <= 128
snprintf(boot_version, sizeof(boot_version), "Boot %s", APPSVERSION);
#else
snprintf(boot_version, sizeof(boot_version), "Boot Ver. %s", APPSVERSION); snprintf(boot_version, sizeof(boot_version), "Boot Ver. %s", APPSVERSION);
#endif
lcd_clear_display(); lcd_clear_display();
lcd_bitmap(rockboxlogo, 0, 10, BMPWIDTH_rockboxlogo, BMPHEIGHT_rockboxlogo); lcd_bitmap(rockboxlogo, 0, 10, BMPWIDTH_rockboxlogo, BMPHEIGHT_rockboxlogo);

1
docs/CREDITS
View file

@ -423,6 +423,7 @@ Rafaël Carré
Denes Balatoni Denes Balatoni
Roy Wallace Roy Wallace
Eric Lassauge Eric Lassauge
François Dinel
The libmad team The libmad team
The wavpack team The wavpack team

8
firmware/SOURCES
View file

@ -329,6 +329,14 @@ target/arm/i2c-telechips.c
target/arm/pnx0101/system-pnx0101.c target/arm/pnx0101/system-pnx0101.c
#endif #endif
#if CONFIG_CPU == AS3525
target/arm/as3525/system-as3525.c
#ifdef SANSA_CLIP
target/arm/as3525/clip/lcd-ssd1303.c
target/arm/as3525/clip/button-clip.c
#endif
#endif
#if defined(CPU_PP) #if defined(CPU_PP)
#if CONFIG_CPU == PP5002 #if CONFIG_CPU == PP5002
target/arm/system-pp5002.c target/arm/system-pp5002.c

315
firmware/export/as3525.h Normal file
View file

@ -0,0 +1,315 @@
/*
* (C) Copyright 2006
* Copyright (C) 2006 Austriamicrosystems, by thomas.luo
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __AS3525_H__
#define __AS3525_H__
#define UART_CHANNELS 1
/* AS352X only supports 512 Byte HW ECC */
#define ECCSIZE 512
#define ECCBYTES 3
/* AS352X device base addresses */
/*
------------------------------------------------------------------------
* AS352X Registers
*
------------------------------------------------------------------------
*
*/
/* AHB */
#define USB_BASE 0xC6000000
#define VIC_BASE 0xC6010000
#define DMAC_BASE 0xC6020000
#define MPMC_BASE 0xC6030000
#define MEMSTICK_BASE 0xC6040000
#define CF_IDE_BASE 0xC6050000
/* APB */
#define NAND_FLASH_BASE 0xC8000000
#define BIST_MANAGER_BASE 0xC8010000
#define SD_MCI_BASE 0xC8020000
#define TIMER_BASE 0xC8040000
#define WDT_BASE 0xC8050000
#define I2C_MS_BASE 0xC8060000
#define I2C_AUDIO_BASE 0xC8070000
#define SSP_BASE 0xC8080000
#define I2SIN_BASE 0xC8090000
#define I2SOUT_BASE 0xC80A0000
#define GPIOA_BASE 0xC80B0000
#define GPIOB_BASE 0xC80C0000
#define GPIOC_BASE 0xC80D0000
#define GPIOD_BASE 0xC80E0000
#define CGU_BASE 0xC80F0000
#define CCU_BASE 0xC8100000
#define UART0_BASE 0xC8110000
#define DBOP_BASE 0xC8120000
/*
------------------------------------------------------------------------
* AS352X control registers
*
------------------------------------------------------------------------
*/
#define CCU_SRC (*(volatile unsigned long *)(CCU_BASE + 0x00))
#define CCU_SRL (*(volatile unsigned long *)(CCU_BASE + 0x04))
#define CCU_MEMMAP (*(volatile unsigned long *)(CCU_BASE + 0x08))
#define CCU_IO (*(volatile unsigned long *)(CCU_BASE + 0x0C))
#define CCU_SCON (*(volatile unsigned long *)(CCU_BASE + 0x10))
#define CCU_VERS (*(volatile unsigned long *)(CCU_BASE + 0x14))
#define CCU_SPARE1 (*(volatile unsigned long *)(CCU_BASE + 0x18))
#define CCU_SPARE2 (*(volatile unsigned long *)(CCU_BASE + 0x1C))
/* DBOP */
#define DBOP_TIMPOL_01 (*(volatile unsigned long *)(DBOP_BASE + 0x00))
#define DBOP_TIMPOL_23 (*(volatile unsigned long *)(DBOP_BASE + 0x04))
#define DBOP_CTRL (*(volatile unsigned long *)(DBOP_BASE + 0x08))
#define DBOP_STAT (*(volatile unsigned long *)(DBOP_BASE + 0x0C))
#define DBOP_DOUT (*(volatile unsigned short*)(DBOP_BASE + 0x10))
#define DBOP_DIN (*(volatile unsigned long *)(DBOP_BASE + 0x14))
/**
* Reset Control Lines in CCU_SRC register
**/
#define CCU_SRC_DBOP_EN ( 1 << 24 )
#define CCU_SRC_SPDIF_EN ( 1 << 22 )
#define CCU_SRC_TIMER_EN ( 1 << 21 )
#define CCU_SRC_SSP_EN ( 1 << 20 )
#define CCU_SRC_WDO_EN ( 1 << 19 )
#define CCU_SRC_IDE_EN ( 1 << 18 )
#define CCU_SRC_IDE_AHB_EN ( 1 << 17 )
#define CCU_SRC_UART0 ( 1 << 16 )
#define CCU_SRC_NAF_EN ( 1 << 15 )
#define CCU_SRC_SDMCI_EN ( 1 << 14 )
#define CCU_SRC_GPIO_EN ( 1 << 13 )
#define CCU_SRC_I2C_AUDIO_EN ( 1 << 12 )
#define CCU_SRC_I2C_EN ( 1 << 11 )
#define CCU_SRC_MST_EN ( 1 << 10 )
#define CCU_SRC_I2SIN ( 1 << 9 )
#define CCU_SRC_I2SOUT ( 1 << 8 )
#define CCU_SRC_USB_AHB_EN ( 1 << 7 )
#define CCU_SRC_USB_PHY_EN ( 1 << 6 )
#define CCU_SRC_DMAC_EN ( 1 << 5 )
#define CCU_SRC_VIC_EN ( 1 << 4 )
/**
* Magic number for CCU_SRL for reset.
**/
#define CCU_SRL_MAGIC_NUMBER 0x1A720212
/**
* Chip select lines for NAF. Use these constants to select/deselct the
CE lines
* for NAND flashes in Register CCU_IO.
**/
#define CCU_IO_NAF_CE_LINE_0 ( 0 << 7 )
#define CCU_IO_NAF_CE_LINE_1 ( 1 << 7 )
#define CCU_IO_NAF_CE_LINE_2 ( 2 << 7 )
#define CCU_IO_NAF_CE_LINE_3 ( 3 << 7 )
/* CCU IO Select/Deselect IDE */
#define CCU_IO_IDE ( 1 << 5 )
/* CCU IO Select/desect I2C */
#define CCU_IO_I2C_MASTER_SLAVE ( 1 << 1 )
/* CCU IO Select/desect UART */
#define CCU_IO_UART0 ( 1 << 0 )
#define CCU_RESET_ALL_BUT_MEMORY \
( CCU_SRC_DBOP_EN \
| CCU_SRC_SPDIF_EN \
| CCU_SRC_TIMER_EN \
| CCU_SRC_SSP_EN \
| CCU_SRC_WDO_EN \
| CCU_SRC_IDE_EN \
| CCU_SRC_IDE_AHB_EN \
| CCU_SRC_UART0 \
| CCU_SRC_NAF_EN \
| CCU_SRC_SDMCI_EN \
| CCU_SRC_GPIO_EN \
| CCU_SRC_I2C_AUDIO_EN \
| CCU_SRC_I2C_EN \
| CCU_SRC_MST_EN \
| CCU_SRC_I2SIN \
| CCU_SRC_I2SOUT \
| CCU_SRC_USB_AHB_EN \
| CCU_SRC_USB_PHY_EN \
| CCU_SRC_DMAC_EN \
| CCU_SRC_VIC_EN \
)
#define CCU_IO_UART ( 1 << 0 )
/*
------------------------------------------------------------------------
* AS352X clock control registers
*
------------------------------------------------------------------------
*/
#define CGU_PLLA (*(volatile unsigned long *)(CGU_BASE + 0x00))
#define CGU_PLLB (*(volatile unsigned long *)(CGU_BASE + 0x04))
#define CGU_PLLASUP (*(volatile unsigned long *)(CGU_BASE + 0x08))
#define CGU_PLLBSUP (*(volatile unsigned long *)(CGU_BASE + 0x0C))
#define CGU_PROC (*(volatile unsigned long *)(CGU_BASE + 0x10))
#define CGU_PERI (*(volatile unsigned long *)(CGU_BASE + 0x14))
#define CGU_AUDIO (*(volatile unsigned long *)(CGU_BASE + 0x18))
#define CGU_USB (*(volatile unsigned long *)(CGU_BASE + 0x1C))
#define CGU_INTCTRL (*(volatile unsigned long *)(CGU_BASE + 0x20))
#define CGU_IRQ (*(volatile unsigned long *)(CGU_BASE + 0x24))
#define CGU_COUNTA (*(volatile unsigned long *)(CGU_BASE + 0x28))
#define CGU_COUNTB (*(volatile unsigned long *)(CGU_BASE + 0x2C))
#define CGU_IDE (*(volatile unsigned long *)(CGU_BASE + 0x30))
#define CGU_MEMSTICK (*(volatile unsigned long *)(CGU_BASE + 0x34))
#define CGU_DBOP (*(volatile unsigned long *)(CGU_BASE + 0x38))
/* --- are disabled after reset --- */
#define CGU_DMA_CLOCK_ENABLE ( 1 << 22 ) /* dma */
#define CGU_USB_CLOCK_ENABLE ( 1 << 21 ) /* usb */
#define CGU_I2SOUT_APB_CLOCK_ENABLE ( 1 << 20 ) /* i2sout */
#define CGU_I2SIN_APB_CLOCK_ENABLE ( 1 << 19 ) /* i2sin */
#define CGU_I2C_MASTER_SLAVE_CLOCK_ENABLE ( 1 << 18 ) /* i2c master/slave */
#define CGU_I2C_AUDIO_MASTER_CLOCK_ENABLE ( 1 << 17 ) /* i2c audio master */
#define CGU_GPIO_CLOCK_ENABLE ( 1 << 16 ) /* gpio */
#define CGU_MCI_CLOCK_ENABLE ( 1 << 15 ) /* mmc + sd */
#define CGU_NAF_CLOCK_ENABLE ( 1 << 14 ) /* naf */
#define CGU_UART_APB_CLOCK_ENABLE ( 1 << 13 ) /* uart */
#define CGU_WDOCNT_CLOCK_ENABLE ( 1 << 12 ) /* watchdog counter */
#define CGU_WDOIF_CLOCK_ENABLE ( 1 << 11 ) /* watchdog timer module */
#define CGU_SSP_CLOCK_ENABLE ( 1 << 10 ) /* ssp */
#define CGU_TIMER1_CLOCK_ENABLE ( 1 << 9 ) /* timer 1 */
#define CGU_TIMER2_CLOCK_ENABLE ( 1 << 8 ) /* timer 2 */
#define CGU_TIMERIF_CLOCK_ENABLE ( 1 << 7 ) /* timer
interface */
/** ------------------------------------------------------------------
* Number of cycles to wait before cgu is safely locked.
**/
#define CGU_LOCK_CNT 0xFF
/* FIFO depth is 16 for tx and rx fifo */
#define UART_FIFO_DEPTH 16
/* ------------------- UART Line Control Register bit fields -------------------- */
#define UART_LNCTL_DLSEN (1 << 7) /* Device latch select bit */
/* -------------- UART Interrupt Control Register bit fields --------------- */
#define UART_INTR_RXDRDY 0x1 /* Data ready interrupt */
#define UART_INTR_TXEMT 0x2 /* Transmit data empty interrupt */
#define UART_INTR_RXLINESTATUS 0x4 /* Receive line status interrupt */
/* ------------------- UART Line Status Register bit fields -------------------- */
#define UART_ERRORBITS 0x1E
#define UART_RX_DATA_READY (1 << 0)
#define UART_TX_HOLD_EMPTY (1 << 5)
/* ------------------- FIFO CNTL Register contants -------------------*/
#define UART_FIFO_EN (1 << 0) /* Enable the UART FIFO */
#define UART_TX_FIFO_RST (1 << 1) /* Enable the UART FIFO */
#define UART_RX_FIFO_RST (1 << 2)
#define UART_RXFIFO_TRIGLVL_1 (0 << 4) /* RX FIFO TRIGGER_LEVEL 1 */
#define UART_RXFIFO_TRIGLVL_4 0x08 /* RX FIFO TRIGGER_LEVEL 4 */
#define UART_RXFIFO_TRIGLVL_8 0x10 /* RX FIFO TRIGGER_LEVEL 8 */
#define UART_RXFIFO_TRIGLVL_14 0x18 /* RX FIFO TRIGGER_LEVEL 14 */
/* ------------------- FIFO status Register contants ------------------*/
#define UART_TX_FIFO_FULL (1 << 0)
#define UART_RX_FIFO_FULL (1 << 1)
#define UART_TX_FIFO_EMPTY (1 << 2)
#define UART_RX_FIFO_EMPTY (1 << 3)
/* ----------------------- defines ---------------------------------------- */
#define UART_DATA_REG (*(volatile unsigned long*)(UART0_BASE + 0x00)) /* Data register */
#define UART_DLO_REG (*(volatile unsigned long*)(UART0_BASE + 0x00)) /* Clock divider(lower byte) register */
#define UART_DHI_REG (*(volatile unsigned long*)(UART0_BASE + 0x04)) /* Clock divider(higher byte) register */
#define UART_INTEN_REG (*(volatile unsigned long*)(UART0_BASE + 0x04)) /* Interrupt enable register */
#define UART_INTSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x08)) /* Interrupt status register */
#define UART_FCTL_REG (*(volatile unsigned long*)(UART0_BASE + 0x0C)) /* Fifo control register */
#define UART_FSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x0C)) /* Fifo status register */
#define UART_LNCTL_REG (*(volatile unsigned long*)(UART0_BASE + 0x10)) /* Line control register */
#define UART_LNSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x14)) /* Line status register */
#define TIMER_LOAD (*(volatile unsigned long*)(TIMER_BASE + 0x00)) /* 32-bit width */
#define TIMER_VALUE (*(volatile unsigned long*)(TIMER_BASE + 0x04)) /* 32 bit width */
#define TIMER_CONTROL (*(volatile unsigned long*)(TIMER_BASE + 0x08)) /* 8 bit width */
#define TIMER_INTCLR (*(volatile unsigned long*)(TIMER_BASE + 0x0C)) /* clears ir by write access */
#define TIMER_RIS (*(volatile unsigned long*)(TIMER_BASE + 0x10)) /* 1 bit width */
#define TIMER_MIS (*(volatile unsigned long*)(TIMER_BASE + 0x14)) /* 1 bit width */
/**
* Counter/Timer control register bits
**/
#define TIMER_ENABLE 0x80
#define TIMER_PERIODIC 0x40
#define TIMER_INT_ENABLE 0x20
#define TIMER_32_BIT 0x02
#define TIMER_ONE_SHOT 0x01
#define TIMER_PRESCALE_1 0x00
#define TIMER_PRESCALE_16 0x04
#define TIMER_PRESCALE_256 0x08
/* GPIO registers */
#define GPIOA_DIR (*(volatile unsigned long*)(GPIOA_BASE+0x400))
#define GPIOA_AFSEL (*(volatile unsigned char*)(GPIOA_BASE+0x420))
#define GPIOA_PIN(a) (*(volatile unsigned long*)(GPIOA_BASE+4*(1<<(a))))
#define GPIOB_DIR (*(volatile unsigned long*)(GPIOB_BASE+0x400))
#define GPIOB_AFSEL (*(volatile unsigned char*)(GPIOB_BASE+0x420))
#define GPIOB_PIN(a) (*(volatile unsigned long*)(GPIOB_BASE+4*(1<<(a))))
#define GPIOC_DIR (*(volatile unsigned long*)(GPIOC_BASE+0x400))
#define GPIOC_AFSEL (*(volatile unsigned char*)(GPIOC_BASE+0x420))
#define GPIOC_PIN(a) (*(volatile unsigned long*)(GPIOC_BASE+4*(1<<(a))))
#define GPIOD_DIR (*(volatile unsigned long*)(GPIOD_BASE+0x400))
#define GPIOD_AFSEL (*(volatile unsigned char*)(GPIOD_BASE+0x420))
#define GPIOD_PIN(a) (*(volatile unsigned long*)(GPIOD_BASE+4*(1<<(a))))
#endif /*__AS3525_H__*/

176
firmware/export/config-clip.h Normal file
View file

@ -0,0 +1,176 @@
/*
* This config file is for the Sandisk Sansa e200
*/
#define TARGET_TREE /* this target is using the target tree system */
/* For Rolo and boot loader */
#define MODEL_NUMBER 50
#define MODEL_NAME "Sandisk Sansa Clip"
#define FIRMWARE_OFFSET_FILE_DATA 0
#define FIRMWARE_OFFSET_FILE_CRC 0
#if 0
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
/* define this if you have recording possibility */
#define HAVE_RECORDING
#define REC_SAMPR_CAPS (SAMPR_CAP_22)
#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
#define REC_SAMPR_DEFAULT SAMPR_22
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
#endif
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
/* define this if you have access to the quickscreen */
//#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
//#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
//#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 64
#define LCD_DEPTH 1
#define LCD_PIXELFORMAT VERTICAL_PACKING
/* define this if you have LCD enable function */
#define HAVE_LCD_ENABLE
#ifndef BOOTLOADER
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
should be defined as well. */
//#define HAVE_LCD_SLEEP
//#define HAVE_LCD_SLEEP_SETTING
#endif
/* define this if you can flip your LCD */
//#define HAVE_LCD_FLIP
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
#define CONFIG_KEYPAD SANSA_CLIP_PAD
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
#define HAVE_AS3525
/* define this if you have a real-time clock */
#ifndef BOOTLOADER
//#define CONFIG_RTC RTC_AS3525
#endif
/* Define this if you have a software controlled poweroff */
//#define HAVE_SW_POWEROFF
#define HAVE_FAT16SUPPORT
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0
//#define CODEC_SIZE 0x80000
/* The number of bytes reserved for loadable plugins */
//#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE 1
/* FM Tuner */
//#define CONFIG_TUNER LV24020LP
//#define HAVE_TUNER_PWR_CTRL
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
#define HAVE_ATA_SD
#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* Hardware controlled charging? FIXME */
#define CONFIG_CHARGING CHARGING_SIMPLE
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/** Non-simulator section **/
#ifndef SIMULATOR
/* Define this if you have a PortalPlayer PP5024 */
#define CONFIG_CPU AS3525
/* Define this if you want to use the PP5024 i2c interface */
#define CONFIG_I2C I2C_AS3525
/* define this if the hardware can be powered off while charging */
/* Sansa can't be powered off while charging */
/* #define HAVE_POWEROFF_WHILE_CHARGING */
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* Define this to the CPU frequency */
#define CPU_FREQ 250000000
/* Type of LCD */
#define CONFIG_LCD LCD_SSD1303
#ifndef BOOTLOADER
#define HAVE_MULTIVOLUME
#define HAVE_HOTSWAP
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x7421
#endif /* BOOTLOADER */
/* Virtual LED (icon) */
#define CONFIG_LED LED_VIRTUAL
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define INCLUDE_TIMEOUT_API
#endif /* SIMULATOR */
/** Port-specific settings **/
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 12
#define DEFAULT_BRIGHTNESS_SETTING 6
/* Default recording levels */
#define DEFAULT_REC_MIC_GAIN 23
#define DEFAULT_REC_LEFT_GAIN 23
#define DEFAULT_REC_RIGHT_GAIN 23

7
firmware/export/config.h
View file

@ -61,6 +61,7 @@
#define TCC7801 7801 #define TCC7801 7801
#define S5L8700 8700 #define S5L8700 8700
#define JZ4732 4732 #define JZ4732 4732
#define AS3525 3525
/* CONFIG_KEYPAD */ /* CONFIG_KEYPAD */
#define PLAYER_PAD 1 #define PLAYER_PAD 1
@ -97,6 +98,7 @@
#define ONDAVX767_PAD 32 #define ONDAVX767_PAD 32
#define MEIZU_M6SP_PAD 33 #define MEIZU_M6SP_PAD 33
#define MEIZU_M3_PAD 34 #define MEIZU_M3_PAD 34
#define SANSA_CLIP_PAD 35
/* CONFIG_REMOTE_KEYPAD */ /* CONFIG_REMOTE_KEYPAD */
#define H100_REMOTE 1 #define H100_REMOTE 1
@ -141,6 +143,7 @@
#define LCD_MEIZUM6 28 /* as used by the Meizu M6SP and M6SL (various models) */ #define LCD_MEIZUM6 28 /* as used by the Meizu M6SP and M6SL (various models) */
#define LCD_ONDAVX747 29 /* as used by the Onda VX747 */ #define LCD_ONDAVX747 29 /* as used by the Onda VX747 */
#define LCD_ONDAVX767 30 /* as used by the Onda VX767 */ #define LCD_ONDAVX767 30 /* as used by the Onda VX767 */
#define LCD_SSD1303 31 /* as used by the Sansa Clip */
/* LCD_PIXELFORMAT */ /* LCD_PIXELFORMAT */
#define HORIZONTAL_PACKING 1 #define HORIZONTAL_PACKING 1
@ -301,6 +304,8 @@
#include "config-ondavx747.h" #include "config-ondavx747.h"
#elif defined(ONDA_VX767) #elif defined(ONDA_VX767)
#include "config-ondavx767.h" #include "config-ondavx767.h"
#elif defined(SANSA_CLIP)
#include "config-clip.h"
#else #else
/* no known platform */ /* no known platform */
#endif #endif
@ -450,7 +455,7 @@
#define ARM_ARCH 6 /* ARMv6 */ #define ARM_ARCH 6 /* ARMv6 */
#endif #endif
#if defined(CPU_TCC77X) || defined(CPU_TCC780X) || (CONFIG_CPU == DM320) #if defined(CPU_TCC77X) || defined(CPU_TCC780X) || (CONFIG_CPU == DM320) || (CONFIG_CPU == AS3525)
#define CPU_ARM #define CPU_ARM
#define ARM_ARCH 5 /* ARMv5 */ #define ARM_ARCH 5 /* ARMv5 */
#endif #endif

3
firmware/export/cpu.h
View file

@ -62,3 +62,6 @@
#if CONFIG_CPU == JZ4732 #if CONFIG_CPU == JZ4732
#include "jz4740.h" #include "jz4740.h"
#endif #endif
#if CONFIG_CPU == AS3525
#include "as3525.h"
#endif

2
firmware/export/timer.h
View file

@ -34,7 +34,7 @@
#elif CONFIG_CPU == PNX0101 #elif CONFIG_CPU == PNX0101
#define TIMER_FREQ 3000000 #define TIMER_FREQ 3000000
#elif CONFIG_CPU == S3C2440 || CONFIG_CPU == DM320 || CONFIG_CPU == TCC7801 \ #elif CONFIG_CPU == S3C2440 || CONFIG_CPU == DM320 || CONFIG_CPU == TCC7801 \
|| defined(CPU_TCC77X) || defined(CPU_TCC77X) || CONFIG_CPU == AS3525
#include "timer-target.h" #include "timer-target.h"
#elif defined(SIMULATOR) #elif defined(SIMULATOR)
#define TIMER_FREQ 1000000 #define TIMER_FREQ 1000000

43
firmware/target/arm/as3525/boot.lds Normal file
View file

@ -0,0 +1,43 @@
#include "config.h"
ENTRY(start)
OUTPUT_FORMAT(elf32-littlearm)
OUTPUT_ARCH(arm)
STARTUP(target/arm/crt0.o)
SECTIONS
{
/*. = IRAMORIG; */
.text : {
*(.init.text)
*(.text*)
}
.data : {
*(.icode)
*(.irodata)
*(.idata)
*(.data*)
*(.ncdata*);
_dataend = . ;
}
.stack :
{
*(.stack)
_stackbegin = .;
stackbegin = .;
. += 0x2000;
_stackend = .;
stackend = .;
}
.bss : {
_edata = .;
*(.bss*);
*(.ibss);
*(.ncbss*);
_end = .;
}
}

24
firmware/target/arm/as3525/clip/adc-target.h Normal file
View file

@ -0,0 +1,24 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 ??
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef _ADC_TARGET_H_
#define _ADC_TARGET_H_
#endif /* _ADC_TARGET_H_ */

37
firmware/target/arm/as3525/clip/backlight-target.h Normal file
View file

@ -0,0 +1,37 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 ??
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef BACKLIGHT_TARGET_H
#define BACKLIGHT_TARGET_H
static inline bool _backlight_init(void)
{
return true;
}
static inline void _backlight_on(void)
{
}
static inline void _backlight_off(void)
{
}
#endif

92
firmware/target/arm/as3525/clip/button-clip.c Normal file
View file

@ -0,0 +1,92 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 François Dinel
* Copyright (C) 2008 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "button-target.h"
#include "as3525.h"
void button_init_device(void)
{
GPIOA_DIR &= ~((1<<7) | (1<<3));
GPIOB_DIR &= ~((1<<2) | (1<<1) | (1<<0));
GPIOC_PIN(4) = 0x00;
GPIOC_PIN(5) = 0x00;
GPIOC_PIN(6) = 0x00;
GPIOC_DIR |= ((1<<6) | (1<<5) | (1<<4));
}
int button_read_device(void)
{
int result = 0;
/* direct GPIO connections */
if (GPIOA_PIN(7))
result |= BUTTON_POWER;
if (GPIOA_PIN(3))
result |= BUTTON_HOLD;
/* This is a keypad using C4-C6 as columns and B0-B2 as rows */
GPIOC_PIN(4) = (1<<4);
/* C4B0 is unused */
if (GPIOB_PIN(1))
result |= BUTTON_VOLUP;
if (GPIOB_PIN(2))
result |= BUTTON_PLAY;
GPIOC_PIN(4) = 0x00;
GPIOC_PIN(5) = (1<<5);
if (GPIOB_PIN(0))
result |= BUTTON_LEFT;
if (GPIOB_PIN(1))
result |= BUTTON_SELECT;
if (GPIOB_PIN(2))
result |= BUTTON_RIGHT;
GPIOC_PIN(5) = 0x00;
GPIOC_PIN(6) = (1<<6);
if (GPIOB_PIN(0))
result |= BUTTON_DOWN;
if (GPIOB_PIN(1))
result |= BUTTON_VOLDOWN;
if (GPIOB_PIN(2))
result |= BUTTON_HOME;
GPIOC_PIN(6) = 0x00;
return result;
}
bool button_hold(void)
{
return (GPIOA_PIN(3) != 0);
}

60
firmware/target/arm/as3525/clip/button-target.h Normal file
View file

@ -0,0 +1,60 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 François Dinel
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef _BUTTON_TARGET_H_
#define _BUTTON_TARGET_H_
#include <stdbool.h>
#include "config.h"
#define HAS_BUTTON_HOLD
void button_init_device(void);
int button_read_device(void);
bool button_hold(void);
/* Main unit's buttons */
#define BUTTON_HOME 0x00000001
#define BUTTON_VOLUP 0x00000002
#define BUTTON_VOLDOWN 0x00000004
#define BUTTON_PLAY 0x00000008
#define BUTTON_DOWN 0x00000010
#define BUTTON_LEFT 0x00000020
#define BUTTON_RIGHT 0x00000040
#define BUTTON_SELECT 0x00000080
#define BUTTON_POWER 0x00000100
#define BUTTON_HOLD 0x00000200
#define BUTTON_MAIN (BUTTON_HOME|BUTTON_VOLUP|BUTTON_VOLDOWN\
|BUTTON_PLAY|BUTTON_DOWN|BUTTON_LEFT|BUTTON_RIGHT\
|BUTTON_SELECT|BUTTON_POWER|BUTTON_HOLD)
#define BUTTON_REMOTE 0
/* Software power-off */
#define POWEROFF_BUTTON BUTTON_POWER
#define POWEROFF_COUNT 40
#endif /* _BUTTON_TARGET_H_ */

312
firmware/target/arm/as3525/clip/lcd-ssd1303.c Normal file
View file

@ -0,0 +1,312 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Alan Korr
* Copyright (C) 2008 François Dinel
* Copyright (C) 2008 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "hwcompat.h"
#include "kernel.h"
#include "lcd.h"
#include "system.h"
#include "cpu.h"
#include "string.h"
/*** AS3525 specifics ***/
#include "as3525.h"
/*** definitions ***/
#define LCD_SET_LOWER_COLUMN_ADDRESS ((char)0x00)
#define LCD_SET_HIGHER_COLUMN_ADDRESS ((char)0x10)
#define LCD_SET_DISPLAY_START_LINE ((char)0x40)
#define LCD_SET_CONTRAST_CONTROL_REGISTER ((char)0x81)
#define LCD_SET_SEGMENT_REMAP ((char)0xA0)
#define LCD_SET_SEGMENT_REMAP_INV ((char)0xA1)
#define LCD_SET_ENTIRE_DISPLAY_OFF ((char)0xA4)
#define LCD_SET_ENTIRE_DISPLAY_ON ((char)0xA5)
#define LCD_SET_NORMAL_DISPLAY ((char)0xA6)
#define LCD_SET_REVERSE_DISPLAY ((char)0xA7)
#define LCD_SET_MULTIPLEX_RATIO ((char)0xA8)
#define LCD_SET_DC_DC ((char)0xAD)
#define LCD_SET_DC_DC_PART2 ((char)0x8A)
#define LCD_SET_DISPLAY_OFF ((char)0xAE)
#define LCD_SET_DISPLAY_ON ((char)0xAF)
#define LCD_SET_PAGE_ADDRESS ((char)0xB0)
#define LCD_SET_COM_OUTPUT_SCAN_DIRECTION ((char)0xC0)
#define LCD_SET_COM_OUTPUT_SCAN_DIRECTION_INV ((char)0xC8)
#define LCD_SET_DISPLAY_CLOCK_AND_OSC_FREQ ((char)0xD5)
#define LCD_SET_VCOM_DESELECT_LEVEL ((char)0xDB)
#define LCD_SET_PRECHARGE_PERIOD ((char)0xD9)
#define LCD_NOP ((char)0xE3)
/* LCD command codes */
#define LCD_CNTL_CONTRAST 0x81 /* Contrast */
#define LCD_CNTL_OUTSCAN 0xc8 /* Output scan direction */
#define LCD_CNTL_SEGREMAP 0xa1 /* Segment remap */
#define LCD_CNTL_DISPON 0xaf /* Display on */
#define LCD_CNTL_PAGE 0xb0 /* Page address */
#define LCD_CNTL_HIGHCOL 0x10 /* Upper column address */
#define LCD_CNTL_LOWCOL 0x00 /* Lower column address */
/* DBOP initialisation, do what OF does */
static void ams3525_dbop_init(void)
{
int clkdiv = 4 - 1;
CGU_DBOP |= (1<<3) /* clk enable */ | clkdiv /* clkdiv: 3 bits */ ;
GPIOB_AFSEL = 0x08; /* DBOP on pin 3 */
GPIOC_AFSEL = 0x0f; /* DBOP on pins 3:0 */
DBOP_CTRL = 0x51008;
DBOP_TIMPOL_01 = 0x6E167;
DBOP_TIMPOL_23 = 0xA167E06F;
}
void lcd_write_command(int byte)
{
/* unset D/C# (data or command) */
GPIOA_PIN(5) = 0;
/* Write command */
DBOP_DOUT = (byte << 8) | byte;
/* While push fifo is not empty */
while ((DBOP_STAT & (1<<10)) == 0)
;
}
void lcd_write_data(const fb_data* p_bytes, int count)
{
/* set D/C# (data or command) */
GPIOA_PIN(5) = (1<<5);
while (count--)
{
/* Write pixels */
DBOP_DOUT = (*p_bytes << 8) | *p_bytes;
p_bytes++; /* next packed pixels */
/* While push fifo is not empty */
while ((DBOP_STAT & (1<<10)) == 0)
;
}
}
/** globals **/
static int xoffset; /* needed for flip */
static bool display_on; /* used by lcd_enable */
/*** hardware configuration ***/
int lcd_default_contrast(void)
{
return 0x1f;
}
void lcd_set_contrast(int val)
{
lcd_write_command(LCD_CNTL_CONTRAST);
lcd_write_command(val);
}
void lcd_set_invert_display(bool yesno)
{
if (yesno)
lcd_write_command(LCD_SET_REVERSE_DISPLAY);
else
lcd_write_command(LCD_SET_NORMAL_DISPLAY);
}
/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
(void)yesno;
/* TODO */
}
void lcd_enable(bool enable)
{
if( (display_on = enable) ) /* simple '=' is not a typo ! */
lcd_write_command(LCD_SET_DISPLAY_ON);
else
lcd_write_command(LCD_SET_DISPLAY_OFF);
}
bool lcd_enabled(void)
{
return display_on;
}
/* LCD init, largely based on what OF does */
void lcd_init_device(void)
{
int i;
#define LCD_FULLSCREEN (128+4)
fb_data p_bytes[LCD_FULLSCREEN]; /* framebuffer used to clear the screen */
ams3525_dbop_init();
GPIOA_DIR |= 0x33; /* pins 5:4 and 1:0 out */
GPIOB_DIR |= 0x60; /* pin 6:5 out */
GPIOA_PIN(1) = (1<<1);
GPIOA_PIN(0) = (1<<0);
GPIOA_PIN(4) = 0;
GPIOB_PIN(5) = 0;
GPIOB_PIN(6) = (1<<6);
/* Set display clock (divide ratio = 1) and oscillator frequency (1) */
lcd_write_command(LCD_SET_DISPLAY_CLOCK_AND_OSC_FREQ);
lcd_write_command(0x10);
/* Set VCOM deselect level to 0.76V */
lcd_write_command(LCD_SET_VCOM_DESELECT_LEVEL);
lcd_write_command(0x34);
/* Set pre-charge period (p1period is 2 dclk and p2period is 5 dclk) */
lcd_write_command(LCD_SET_PRECHARGE_PERIOD);
lcd_write_command(0x25);
/* Set contrast register to 12% */
lcd_set_contrast(lcd_default_contrast());
/* Disable DC-DC */
lcd_write_command(LCD_SET_DC_DC);
lcd_write_command(LCD_SET_DC_DC_PART2/*|0*/);
/* Set starting line as 0 */
lcd_write_command(LCD_SET_DISPLAY_START_LINE /*|(0 & 0x3f)*/);
/* Column 131 is remapped to SEG0 */
lcd_write_command(LCD_SET_SEGMENT_REMAP_INV);
/* Invert COM scan direction (N-1 to 0) */
lcd_write_command(LCD_SET_COM_OUTPUT_SCAN_DIRECTION_INV);
/* Set normal display mode (not every pixel ON) */
lcd_write_command(LCD_SET_ENTIRE_DISPLAY_OFF);
/* Set normal display mode (not inverted) */
lcd_write_command(LCD_SET_NORMAL_DISPLAY);
/* Clear whole framebuffer, including "overscan"
* We don't need to handle that out of screen columns in lcd_clear_display()
* since we will never write into it anymore
*/
lcd_write_command (LCD_SET_HIGHER_COLUMN_ADDRESS /*| 0*/);
lcd_write_command (LCD_SET_LOWER_COLUMN_ADDRESS /*| 0*/);
memset(p_bytes, 0, sizeof(p_bytes)); /* fills with 0 : pixel off */
for(i = 0; i < 8; i++)
{
lcd_write_command (LCD_SET_PAGE_ADDRESS | (i /*& 0xf*/));
lcd_write_data(p_bytes, LCD_FULLSCREEN /* overscan */);
}
lcd_update();
}
/*** Update functions ***/
/* Performance function that works with an external buffer
note that by and bheight are in 8-pixel units! */
void lcd_blit_mono(const unsigned char *data, int x, int by, int width,
int bheight, int stride)
{
/* Copy display bitmap to hardware */
while (bheight--)
{
lcd_write_command (LCD_CNTL_PAGE | (by++ & 0xf));
lcd_write_command (LCD_CNTL_HIGHCOL | (((x+2+xoffset)>>4) & 0xf));
lcd_write_command (LCD_CNTL_LOWCOL | ((x+2+xoffset) & 0xf));
lcd_write_data(data, width);
data += stride;
}
}
/* Performance function that works with an external buffer
note that by and bheight are in 8-pixel units! */
void lcd_blit_grey_phase(unsigned char *values, unsigned char *phases,
int x, int by, int width, int bheight, int stride)
{
(void)values;
(void)phases;
(void)x;
(void)by;
(void)width;
(void)bheight;
(void)stride;
}
/* Update the display.
This must be called after all other LCD functions that change the display. */
void lcd_update(void) ICODE_ATTR;
void lcd_update(void)
{
int y;
/* Copy display bitmap to hardware */
for (y = 0; y < LCD_FBHEIGHT; y++)
{
lcd_write_command (LCD_CNTL_PAGE | (y & 0xf));
lcd_write_command (LCD_CNTL_HIGHCOL | (((xoffset+2) >> 4) & 0xf));
lcd_write_command (LCD_CNTL_LOWCOL | ((xoffset+2) & 0xf));
lcd_write_data (lcd_framebuffer[y], LCD_WIDTH);
}
}
/* Update a fraction of the display. */
void lcd_update_rect(int, int, int, int) ICODE_ATTR;
void lcd_update_rect(int x, int y, int width, int height)
{
int ymax;
/* The Y coordinates have to work on even 8 pixel rows */
ymax = (y + height-1) >> 3;
y >>= 3;
if(x + width > LCD_WIDTH)
width = LCD_WIDTH - x;
if (width <= 0)
return; /* nothing left to do, 0 is harmful to lcd_write_data() */
if(ymax >= LCD_FBHEIGHT)
ymax = LCD_FBHEIGHT-1;
/* Copy specified rectange bitmap to hardware */
for (; y <= ymax; y++)
{
lcd_write_command (LCD_CNTL_PAGE | (y & 0xf));
lcd_write_command (LCD_CNTL_HIGHCOL | (((x+2+xoffset) >> 4) & 0xf));
lcd_write_command (LCD_CNTL_LOWCOL | ((x+2+xoffset) & 0xf));
lcd_write_data (&lcd_framebuffer[y][x], width);
}
}

28
firmware/target/arm/as3525/clip/system-target.h Normal file
View file

@ -0,0 +1,28 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 ??
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef SYSTEM_TARGET_H
#define SYSTEM_TARGET_H
#include "system-arm.h"
#define CPUFREQ_MAX 250000000
#endif /* SYSTEM_TARGET_H */

38
firmware/target/arm/as3525/clip/timer-target.h Normal file
View file

@ -0,0 +1,38 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 ??
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef TIMER_TARGET_H
#define TIMER_TARGET_H
bool __timer_set(long cycles, bool set);
bool __timer_register(void);
void __timer_unregister(void);
#define __TIMER_SET(cycles, set) \
__timer_set(cycles, set)
#define __TIMER_REGISTER(reg_prio, unregister_callback, cycles, \
int_prio, timer_callback) \
__timer_register()
#define __TIMER_UNREGISTER(...) \
__timer_unregister()
#endif /* TIMER_TARGET_H */

141
firmware/target/arm/as3525/system-as3525.c Normal file
View file

@ -0,0 +1,141 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Rob Purchase
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "kernel.h"
#include "system.h"
#include "panic.h"
#define default_interrupt(name) \
extern __attribute__((weak,alias("UIRQ"))) void name (void)
void irq_handler(void) __attribute__((interrupt ("IRQ"), naked));
void fiq_handler(void) __attribute__((interrupt ("FIQ"), naked));
default_interrupt(INT_WATCHDOG);
default_interrupt(INT_TIMER1);
default_interrupt(INT_TIMER2);
default_interrupt(INT_USB);
default_interrupt(INT_DMAC);
default_interrupt(INT_NAND);
default_interrupt(INT_IDE);
default_interrupt(INT_MCI0);
default_interrupt(INT_MCI1);
default_interrupt(INT_AUDIO);
default_interrupt(INT_SSP);
default_interrupt(INT_I2C_MS);
default_interrupt(INT_I2C_AUDIO);
default_interrupt(INT_I2SIN);
default_interrupt(INT_I2SOUT);
default_interrupt(INT_UART);
default_interrupt(INT_GPIOD);
default_interrupt(RESERVED1); /* Interrupt 17 : unused */
default_interrupt(INT_CGU);
default_interrupt(INT_MEMORY_STICK);
default_interrupt(INT_DBOP);
default_interrupt(RESERVED2); /* Interrupt 21 : unused */
default_interrupt(RESERVED3); /* Interrupt 22 : unused */
default_interrupt(RESERVED4); /* Interrupt 23 : unused */
default_interrupt(RESERVED5); /* Interrupt 24 : unused */
default_interrupt(RESERVED6); /* Interrupt 25 : unused */
default_interrupt(RESERVED7); /* Interrupt 26 : unused */
default_interrupt(RESERVED8); /* Interrupt 27 : unused */
default_interrupt(RESERVED9); /* Interrupt 28 : unused */
default_interrupt(INT_GPIOA);
default_interrupt(INT_GPIOB);
default_interrupt(INT_GPIOC);
static void (* const irqvector[])(void) =
{
INT_WATCHDOG, INT_TIMER1, INT_TIMER2, INT_USB, INT_DMAC, INT_NAND, INT_IDE, INT_MCI0,
INT_MCI1, INT_AUDIO, INT_SSP, INT_I2C_MS, INT_I2C_AUDIO, INT_I2SIN, INT_I2SOUT,
INT_UART, INT_GPIOD, RESERVED1 /* 17 */ ,INT_CGU, INT_MEMORY_STICK, INT_DBOP,
RESERVED2 /* 21 */, RESERVED3 /* 22 */, RESERVED4 /* 23 */, RESERVED5 /* 24 */,
RESERVED6 /* 25 */, RESERVED7 /* 26 */, RESERVED8 /* 27 */, RESERVED9 /* 28 */,
INT_GPIOA, INT_GPIOB, INT_GPIOC
};
static const char * const irqname[] =
{
"INT_WATCHDOG", "INT_TIMER1", "INT_TIMER2", "INT_USB", "INT_DMAC", "INT_NAND",
"INT_IDE", "INT_MCI0", "INT_MCI1", "INT_AUDIO", "INT_SSP", "INT_I2C_MS",
"INT_I2C_AUDIO", "INT_I2SIN", "INT_I2SOUT", "INT_UART", "INT_GPIOD", "RESERVED1",
"INT_CGU", "INT_MEMORY_STICK", "INT_DBOP", "RESERVED2", "RESERVED3", "RESERVED4",
"RESERVED5", "RESERVED6", "RESERVED7", "RESERVED8", "RESERVED9", "INT_GPIOA",
"INT_GPIOB", "INT_GPIOC"
};
static void UIRQ(void)
{
/* TODO
unsigned int offset = INTOFFSET;
panicf("Unhandled IRQ %02X: %s", offset, irqname[offset]);
*/
}
void irq_handler(void)
{
/*
* Based on: linux/arch/arm/kernel/entry-armv.S and system-meg-fx.c
*/
asm volatile( "stmfd sp!, {r0-r7, ip, lr} \n" /* Store context */
"sub sp, sp, #8 \n"); /* Reserve stack */
/* TODO */
#if 0
int irq_no = INTOFFSET; /* Read clears the corresponding IRQ status */
#else
int irq_no = 69;
#endif
if ((irq_no & (1<<31)) == 0) /* Ensure invalid flag is not set */
{
irqvector[irq_no]();
}
asm volatile( "add sp, sp, #8 \n" /* Cleanup stack */
"ldmfd sp!, {r0-r7, ip, lr} \n" /* Restore context */
"subs pc, lr, #4 \n"); /* Return from IRQ */
}
void fiq_handler(void)
{
asm volatile (
"subs pc, lr, #4 \r\n"
);
}
void system_init(void)
{
/* CGU_PERI |= CGU_GPIO_CLOCK_ENABLE; */
}
void system_reboot(void)
{
}
int system_memory_guard(int newmode)
{
(void)newmode;
return 0;
}

21
tools/configure vendored
View file

@ -693,6 +693,7 @@ cat <<EOF
32) 7 52) Sansa c200 32) 7 52) Sansa c200
33) Cowon D2 53) Sansa m200 33) Cowon D2 53) Sansa m200
34) M3/M3L 54) Sansa c100 34) M3/M3L 54) Sansa c100
55) Sansa Clip
==Tatung== ==Olympus== ==Logik== ==Tatung== ==Olympus== ==Logik==
60) Elio TPJ-1022 70) M:Robe 500 80) DAX 1GB MP3/DAB 60) Elio TPJ-1022 70) M:Robe 500 80) DAX 1GB MP3/DAB
@ -721,6 +722,7 @@ fi
ipodbitmaptools="$toolset scramble bmp2rb" ipodbitmaptools="$toolset scramble bmp2rb"
gigabeatbitmaptools="$toolset scramble descramble bmp2rb" gigabeatbitmaptools="$toolset scramble descramble bmp2rb"
tccbitmaptools="$toolset scramble mktccboot bmp2rb" tccbitmaptools="$toolset scramble mktccboot bmp2rb"
ams3525bitmaptools="$toolset bmp2rb"
# generic is used by IFP, H10, Sansa-e200 # generic is used by IFP, H10, Sansa-e200
genericbitmaptools="$toolset bmp2rb" genericbitmaptools="$toolset bmp2rb"
@ -1675,6 +1677,25 @@ fi
t_model="c100" t_model="c100"
;; ;;
55|Clip|clip)
target_id=50
modelname="clip"
target="-DSANSA_CLIP"
memory=1 # In fact, 0.3125
arm9tdmicc
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
bmp2rb_native="$bmp2rb_mono"
boottool="cp"
bootoutput="rockbox.bin"
appextra="recorder:gui"
plugins=""
toolset="$ams3525bitmaptools"
t_cpu="arm"
t_manufacturer="as3525"
t_model="clip"
;;
60|tpj1022) 60|tpj1022)
target_id=25 target_id=25
modelname="tpj1022" modelname="tpj1022"