devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Correct what happens when selecting Recording in the Main Menu in the manual. Fixes FS#9768

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20877 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Alex Parker 2009-05-08 19:19:48 +00:00
parent 97eafee79e
commit d8e58b6be0
1 changed files with 6 additions and 6 deletions
Download patch file Download diff file Expand all files Collapse all files

12
manual/main_menu/recording_screen.tex
View file

@ -4,9 +4,9 @@
\screenshot{main_menu/images/ss-while-recording-screen}{The while recording
screen}{}
Entering the \setting{Recording} option in the \setting{Main Menu} brings up
a screen in which you can choose to enter the \setting{Recording Screen} or
the \setting{Recording Settings} (see \reference{ref:Recordingsettings}).
Selecting the \setting{Recording} option in the \setting{Main Menu} enters
the \setting{Recording Screen}, whilst pressing \ActionStdContext{} enters the
\setting{Recording Settings} (see \reference{ref:Recordingsettings}).
The \setting{Recording Screen}
shows the time elapsed and the size of the file being recorded. A peak meter
is present to allow you set gain correctly. There is also a volume setting,
@ -14,16 +14,16 @@ this will only affect the output level of the \dap{} and does \emph{not}
affect the recorded sound. If enabled in the peak meter settings, a counter in
front of the peak meters shows the number of times the clip indicator was
activated during recording. The counter is reset to zero when starting a new
recording.
recording.\\*
\opt{swcodec}{
\opt{disk_storage}{
\note{When you start a recording, the hard disk will spin up. This will cause
the peak meters to freeze in the process. This is expected behaviour, and
nothing to worry about. The recording continues during the spin up.}}}
nothing to worry about. The recording continues during the spin up.\\*}}}
\opt{MASCODEC}{The frequency, channels and quality}
\opt{swcodec}{The frequency and channels} settings are shown on the last line.
\opt{swcodec}{The frequency and channels} settings are shown on the last line.\\*
The controls for this screen are:
\begin{table}