Charging state reporting on H3x0

Don't read the GPIO every refresh of statusbar or gwps for plugged state, use a
variable exported from powermgmt instead.
Allow Custom WPS to access %bc for battery charge state on targets that support
this.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8383 a1c6a512-1295-4272-9138-f99709370657

apps/gui/gwps-common.c

@@ -655,11 +655,27 @@ static char* get_tag(struct wps_data* wps_data,
                 
 		case 'p': /* External power plugged in? */
 		{
-		    if(charger_inserted())
+		    if(charger_input_state==CHARGER)
 			return "p";
 		    else
 			return NULL;
 		}
+#if defined(HAVE_CHARGE_CTRL) || \
+    defined (HAVE_CHARGE_STATE) || \
+    CONFIG_BATTERY == BATT_LIION2200
+                case 'c': /* Charging */
+                {
+                    if (charge_state == CHARGING
+#ifdef HAVE_CHARGE_CTRL
+                            || charge_state == TOPOFF
+#endif
+                            ) {
+                        return "c";
+                    } else {
+                        return NULL;
+                    }
+                }
+#endif
             }
             break;
 

apps/gui/statusbar.c

@@ -127,7 +127,7 @@ void gui_statusbar_draw(struct gui_statusbar * bar, bool force_redraw)
 #endif /* HAVE_LCD_CHARCELLS */
 
     bar->info.volume = sound_val2phys(SOUND_VOLUME, global_settings.volume);
-    bar->info.inserted = charger_inserted();
+    bar->info.inserted = (charger_input_state == CHARGER);
     bar->info.battlevel = battery_level();
     bar->info.battery_safe = battery_level_safe();
 
@@ -178,16 +178,21 @@ void gui_statusbar_draw(struct gui_statusbar * bar, bool force_redraw)
 #ifdef HAVE_CHARGING
         if (bar->info.inserted) {
             battery_state = true;
-#if defined(HAVE_CHARGE_CTRL) || CONFIG_BATTERY == BATT_LIION2200
+#if defined(HAVE_CHARGE_CTRL) || \
+    defined(HAVE_CHARGE_STATE) || \
+    CONFIG_BATTERY == BATT_LIION2200
             /* zero battery run time if charging */
-            if (charge_state > 0) {
+            if (charge_state > DISCHARGING) {
                 global_settings.runtime = 0;
                 lasttime = current_tick;
             }
 
             /* animate battery if charging */
-            if ((charge_state == 1) ||
+            if ((charge_state == CHARGING)
-                (charge_state == 2)) {
+#ifdef HAVE_CHARGE_CTRL
+                    || (charge_state == TOPOFF)
+#endif
+                ) {
 #else
             global_settings.runtime = 0;
             lasttime = current_tick;
@@ -323,7 +328,8 @@ void gui_statusbar_icon_battery(struct screen * display, int percent)
     if (fill > 100)
         fill = 100;
 
-#if defined(HAVE_CHARGE_CTRL) && !defined(SIMULATOR) /* Rec v1 target only */
+#if (defined(HAVE_CHARGE_CTRL) || defined(HAVE_CHARGE_STATE)) && \
+    !defined(SIMULATOR) /* Certain charge controlled targets */
     /* show graphical animation when charging instead of numbers */
     if ((global_settings.battery_display) &&
         (charge_state != 1) &&

firmware/drivers/power.c

@@ -148,6 +148,12 @@ void charger_enable(bool on)
 }
 #endif
 
+#ifdef HAVE_CHARGE_STATE
+bool charging_state(void) {
+    return (GPIO_READ & 0x00800000)?true:false;
+}
+#endif
+
 #ifdef HAVE_SPDIF_POWER
 void spdif_power_enable(bool on)
 {

firmware/export/config-h300.h

@@ -72,6 +72,9 @@
 /* Define this if the platform can charge batteries */
 #define HAVE_CHARGING 1
 
+/* For units with a hardware charger that reports charge state */
+#define HAVE_CHARGE_STATE 1
+
 /* define this if the hardware can be powered off while charging */
 #define HAVE_POWEROFF_WHILE_CHARGING
 

firmware/export/power.h

@@ -25,6 +25,7 @@ extern bool charger_enabled;
 
 void power_init(void);
 bool charger_inserted(void);
+bool charging_state(void);
 void charger_enable(bool on);
 void ide_power_enable(bool on);
 bool ide_powered(void);

firmware/export/powermgmt.h

@@ -79,18 +79,38 @@ extern int trickle_sec;          /* trickle charge: How many seconds per minute
 
 #endif /* HAVE_CHARGE_CTRL */
 
-#if defined(HAVE_CHARGE_CTRL) || (CONFIG_BATTERY == BATT_LIION2200)
+#if defined(HAVE_CHARGE_CTRL) || \
+    (CONFIG_BATTERY == BATT_LIION2200) || \
+    defined(HAVE_CHARGE_STATE)
 typedef enum {
     DISCHARGING,
     CHARGING,
+#ifdef HAVE_CHARGE_CTRL
     TOPOFF,
     TRICKLE
+#endif
 } charge_state_type;
 
 /* tells what the charger is doing */
 extern charge_state_type charge_state;
 #endif /* defined(HAVE_CHARGE_CTRL) || (CONFIG_BATTERY == BATT_LIION2200) */
 
+#ifdef HAVE_CHARGING
+/*
+ * Flag that the charger has been plugged in/removed: this is set for exactly
+ * one time through the power loop when the charger has been plugged in.
+ */
+typedef enum {
+    NO_CHARGER,
+    CHARGER_UNPLUGGED,              /* transient state */
+    CHARGER_PLUGGED,                /* transient state */
+    CHARGER
+} charger_input_state_type;
+
+/* tells the state of the charge input */
+extern charger_input_state_type charger_input_state;
+#endif
+
 #ifdef HAVE_MMC  /* Values for Ondio */
 # define CURRENT_NORMAL     95  /* average, nearly proportional to 1/U */
 # define CURRENT_USB         1  /* host powered in USB mode; avoid zero-div */
@@ -106,9 +126,13 @@ extern charge_state_type charge_state;
 
 # define CURRENT_MIN_CHG    70  /* minimum charge current */
 # define MIN_CHG_V        8500  /* at 8.5v charger voltage get CURRENT_MIN_CHG */
-# define CURRENT_MAX_CHG   350  /* maximum charging current */
+# ifdef IRIVER_H300_SERIES
+#  define CURRENT_MAX_CHG  650  /* maximum charging current */
+# else
+#  define CURRENT_MAX_CHG  350  /* maximum charging current */
+# endif
 # define MAX_CHG_V       10250  /* anything over 10.25v gives CURRENT_MAX_CHG */
-#endif /* HAVE_MMC */
+#endif /* not HAVE_MMC */
 
 extern unsigned int bat;       /* filtered battery voltage, centivolts */
 extern unsigned short power_history[POWER_HISTORY_LEN];

firmware/powermgmt.c

@@ -145,33 +145,28 @@ static const short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
 };
 
 #ifdef HAVE_CHARGING
+charger_input_state_type charger_input_state IDATA_ATTR;
+
 /* voltages (centivolt) of 0%, 10%, ... 100% when charging enabled */
 static const short percent_to_volt_charge[11] =
 {
+#if CONFIG_BATTERY == BATT_LIPOL1300
+    340, 349, 358, 367, 376, 385, 394, 403, 408, 413, 418 /* Estimated */
+#else
     /* values guessed, see
        http://www.seattlerobotics.org/encoder/200210/LiIon2.pdf until someone
        measures voltages over a charging cycle */
     476, 544, 551, 556, 561, 564, 566, 576, 582, 584, 585 /* NiMH */
+#endif
 };
 #endif /* HAVE_CHARGING */
 
-#if defined(HAVE_CHARGE_CTRL) || CONFIG_BATTERY == BATT_LIION2200
+#if defined(HAVE_CHARGE_CTRL) || \
+    CONFIG_BATTERY == BATT_LIION2200 || \
+    defined(HAVE_CHARGE_STATE)
 charge_state_type charge_state;     /* charging mode */
 #endif
 
-#ifdef HAVE_CHARGING
-/*
- * Flag that the charger has been plugged in/removed: this is set for exactly
- * one time through the power loop when the charger has been plugged in.
- */
-static enum {
-    NO_CHARGER,
-    CHARGER_UNPLUGGED,              /* transient state */
-    CHARGER_PLUGGED,                /* transient state */
-    CHARGER
-} charger_input_state;
-#endif
-
 #ifdef HAVE_CHARGE_CTRL
 int long_delta;                     /* long term delta battery voltage */
 int short_delta;                    /* short term delta battery voltage */
@@ -317,7 +312,7 @@ static void battery_status_update(void)
 {
     int level;
 
-#ifdef HAVE_CHARGE_CTRL
+#if defined(HAVE_CHARGE_CTRL) || defined(HAVE_CHARGE_STATE)
     if (charge_state == DISCHARGING) {
         level = voltage_to_percent(battery_centivolts,
                 percent_to_volt_discharge[battery_type]);
@@ -520,6 +515,23 @@ static void power_thread_sleep(int ticks)
             }
         }
 #endif
+#ifdef HAVE_CHARGE_STATE
+        switch (charger_input_state) {
+            case CHARGER_UNPLUGGED:
+                charge_state = DISCHARGING;
+            case NO_CHARGER:
+                break;
+            case CHARGER_PLUGGED:
+            case CHARGER:
+                if (charging_state()) {
+                    charge_state = CHARGING;
+                } else {
+                    charge_state = DISCHARGING;
+                }
+                break;
+        }
+        
+#endif /* HAVE_CHARGE_STATE */
 
         small_ticks = MIN(HZ/2, ticks);
         sleep(small_ticks);
@@ -551,6 +563,7 @@ static void power_thread_sleep(int ticks)
             battery_centivolts = avgbat / BATT_AVE_SAMPLES / 10000;
 
         }
+
 #if defined(DEBUG_FILE) && defined(HAVE_CHARGE_CTRL)
         /*
          * If we have a lot of pending writes or if the disk is spining,
@@ -821,7 +834,7 @@ static void power_thread(void)
             snprintf(power_message, POWER_MESSAGE_LEN, "Charger: discharge");
         }
 
-#endif /* HAVE_CHARGE_CTRL*/
+#endif /* end HAVE_CHARGE_CTRL */
 
         /* sleep for a minute */
 
@@ -840,7 +853,7 @@ static void power_thread(void)
 #if defined(DEBUG_FILE) && defined(HAVE_CHARGE_CTRL)
         if(usb_inserted()) {
             if(fd >= 0) {
-                /* It is probably too late to close the file but we can try... */
+                /* It is probably too late to close the file but we can try...*/
                 close(fd);
                 fd = -1;
             }
@@ -855,9 +868,11 @@ static void power_thread(void)
                 }
             }
             if(fd >= 0) {
-                snprintf(debug_message, DEBUG_MESSAGE_LEN, "%d, %d, %d, %d, %d, %d, %d, %d\n",
+                snprintf(debug_message, DEBUG_MESSAGE_LEN, 
+                        "%d, %d, %d, %d, %d, %d, %d, %d\n",
                     powermgmt_last_cycle_startstop_min, battery_centivolts,
-                    battery_percent, charger_input_state, charge_state, pid_p, pid_i, trickle_sec);
+                    battery_percent, charger_input_state, charge_state,
+                    pid_p, pid_i, trickle_sec);
                 write(fd, debug_message, strlen(debug_message));
                 wrcount++;
             }