FS#11597 : decrease FCLK frequency when unboosted

FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly

Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657

firmware/export/config/sansaclip.h

@@ -154,7 +154,7 @@
 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 
 /* define current usage levels (based on battery bench) */
-#define CURRENT_NORMAL     42
+#define CURRENT_NORMAL     37
 #define CURRENT_BACKLIGHT  13
 #define CURRENT_RECORD     CURRENT_NORMAL
 

firmware/export/config/sansae200v2.h

@@ -158,7 +158,7 @@
 #define CONFIG_I2C I2C_AS3525
 
 /* define current usage levels (based on battery bench) */
-#define CURRENT_NORMAL     45
+#define CURRENT_NORMAL     44
 #define CURRENT_BACKLIGHT  30
 #define CURRENT_RECORD     CURRENT_NORMAL
 

firmware/export/config/sansafuze.h

@@ -162,7 +162,7 @@
 #define CONFIG_I2C I2C_AS3525
 
 /* define current usage levels (based on battery bench) */
-#define CURRENT_NORMAL     37
+#define CURRENT_NORMAL     35
 #define CURRENT_BACKLIGHT  30
 #define CURRENT_RECORD     CURRENT_NORMAL
 

firmware/target/arm/as3525/clock-target.h

@@ -139,7 +139,6 @@
 #define AS3525_FCLK_POSTDIV      (CLK_DIV((AS3525_PLLA_FREQ*(8-AS3525_FCLK_PREDIV)/8), AS3525_FCLK_FREQ) - 1) /*div=1/(n+1)*/
 
 #if CONFIG_CPU == AS3525v2
-/* On as3525v2 we change fclk by writing to CGU_PROC */
 #define AS3525_FCLK_POSTDIV_UNBOOSTED      (CLK_DIV((AS3525_PLLA_FREQ*(8-AS3525_FCLK_PREDIV)/8), CPUFREQ_NORMAL) - 1) /*div=1/(n+1) */
 /* Since pclk is based on fclk, we need to change CGU_PERI as well */
 #define AS3525_PCLK_DIV0_UNBOOSTED (CLK_DIV(CPUFREQ_NORMAL, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
@@ -164,21 +163,18 @@
 
 /* PCLK */
 
-/* Figure out if we need to use asynchronous bus */
+#if CONFIG_CPU == AS3525
-#if ((CONFIG_CPU == AS3525) && (AS3525_FCLK_FREQ % AS3525_PCLK_FREQ))
-#define ASYNCHRONOUS_BUS                          /* Boosted mode asynchronous */
-#endif
-
-#ifdef ASYNCHRONOUS_BUS
-#define AS3525_PCLK_SEL          AS3525_CLK_PLLA    /* PLLA input for asynchronous */
-#define AS3525_PCLK_DIV0         (CLK_DIV(AS3525_PLLA_FREQ, AS3525_DRAM_FREQ) - 1)/*div=1/(n+1)*/
-#else /* ASYNCHRONOUS_BUS */
-#define AS3525_PCLK_SEL          AS3525_CLK_FCLK    /* Fclk input for synchronous */
-#define AS3525_PCLK_DIV0         (CLK_DIV(AS3525_FCLK_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
-#endif /* ASYNCHRONOUS_BUS */
 
+#define AS3525_PCLK_SEL          AS3525_CLK_PLLA
          /*unable to use AS3525_PCLK_DIV1 != 0 successfuly so far*/
 #define AS3525_PCLK_DIV1         (CLK_DIV(AS3525_DRAM_FREQ, AS3525_PCLK_FREQ) - 1)/* div = 1/(n+1)*/ 
+#define AS3525_PCLK_DIV0         (CLK_DIV(AS3525_PLLA_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
+#else
+
+#define AS3525_PCLK_SEL          AS3525_CLK_FCLK
+#define AS3525_PCLK_DIV0         (CLK_DIV(AS3525_FCLK_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
+
+#endif /* CONFIG_CPU */
 
    /* PCLK as Source */
   #define AS3525_DBOP_DIV        (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) /*div=1/(n+1)*/

firmware/target/arm/as3525/system-as3525.c

@@ -262,11 +262,7 @@ void system_init(void)
 #endif
                   AS3525_PCLK_SEL);
 
-#if CONFIG_CPU == AS3525
+    set_cpu_frequency(CPUFREQ_DEFAULT);
-    cpu_frequency = CPUFREQ_DEFAULT;    /* fastbus */
-#else
-    cpu_frequency = CPUFREQ_MAX;
-#endif
 
 #if 0 /* the GPIO clock is already enabled by the dualboot function */
     CGU_PERI |= CGU_GPIO_CLOCK_ENABLE;
@@ -367,16 +363,14 @@ void set_cpu_frequency(long frequency)
         while(adc_read(ADC_CVDD) < 470); /* 470 * .0025 = 1.175V */
 #endif  /*  HAVE_ADJUSTABLE_CPU_VOLTAGE */
 
+        CGU_PROC = ((AS3525_FCLK_POSTDIV << 4) |
+                    (AS3525_FCLK_PREDIV  << 2) |
+                     AS3525_FCLK_SEL);
+
         asm volatile(
             "mrc p15, 0, r0, c1, c0  \n"
-
-#ifdef ASYNCHRONOUS_BUS
-            "orr r0, r0, #3<<30      \n"   /* asynchronous bus clocking */
-#else
             "bic r0, r0, #3<<30      \n"   /* clear bus bits */
             "orr r0, r0, #1<<30      \n"   /* synchronous bus clocking */
-#endif
-
             "mcr p15, 0, r0, c1, c0  \n"
             : : : "r0" );
 
@@ -390,6 +384,8 @@ void set_cpu_frequency(long frequency)
             "mcr p15, 0, r0, c1, c0  \n"
             : : : "r0" );
 
+        /* FCLK is unused so put it to the lowest freq we can */
+        CGU_PROC = ((0xf << 4) | (0x3 << 2) | AS3525_CLK_MAIN);
 
 #ifdef HAVE_ADJUSTABLE_CPU_VOLTAGE
         /* Decreasing frequency so reduce voltage after change */