devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Further optimised SH1 memcpy(): Lower latency for very small blocks, faster large block copying for odd destination alignment (+27% for long+1, +33% for long+3).

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7690 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Jens Arnold 2005-10-30 20:48:52 +00:00
parent 15a830bdba
commit c082bc42a2
1 changed files with 117 additions and 68 deletions
Download patch file Download diff file Expand all files Collapse all files

175
firmware/common/memcpy_a.S
View file

@ -7,7 +7,7 @@
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2004 by Jens Arnold
* Copyright (C) 2004-2005 by Jens Arnold
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
@ -37,10 +37,10 @@
* r0 - destination address (like ANSI version)
*
* register usage:
* r0 - data / temporary
* r1 - bit mask for rounding to long bounds / 2nd data
* r2 - first long bound (only if >= 12 bytes)
* r3 - last long bound (-4) (only if >= 12 bytes)
* r0 - data / scratch
* r1 - 2nd data / scratch
* r2 - scratch
* r3 - first long bound / adjusted end address (only if >= 11 bytes)
* r4 - current dest address
* r5 - current source address
* r6 - source end address
@ -51,82 +51,81 @@
*/
_memcpy:
mov r4,r7 /* store dest for returning */
add #-8,r4 /* offset for early increment (max. 2 longs) */
mov #11,r0
cmp/hs r0,r6 /* at least 11 bytes to copy? (ensures 2 aligned longs) */
add r5,r6 /* r6 = source_end */
mov r4,r7 /* store for returning */
add #-8,r4 /* adjust for early increments (max. 2 longs) */
bf .start_b2 /* no: jump directly to byte loop */
mov r6,r0
add #-12,r0 /* r0 = r6 - 12; don't go below 12 here! */
cmp/hs r5,r0 /* >= 12 bytes to copy? */
bf .start_b2 /* no, jump into byte loop */
mov #3,r0
neg r5,r3
and r0,r3 /* r3 = (4 - align_offset) % 4 */
tst r3,r3 /* already aligned? */
bt .end_b1 /* yes: skip leading byte loop */
mov #-4,r1 /* r1 = 0xFFFFFFFC */
mov r5,r2
add #3,r2
and r1,r2 /* r2 = first source long bound */
mov r6,r3
add #-4,r3 /* end offset for copying 2 longs per pass */
bra .start_b1 /* jump into leading byte loop */
and r1,r3 /* r3 = last source long bound - 4 */
add r5,r3 /* r3 = first source long bound */
/* leading byte loop: copies 0..3 bytes */
.align 2
.loop_b1:
mov.b @r5+,r0 /* load byte & increment source addr */
add #1,r4 /* increment dest addr */
mov.b r0,@(7,r4) /* store byte */
.start_b1:
cmp/hi r5,r2 /* runs r5 up to first long bound */
cmp/hi r5,r3 /* runs r5 up to first long bound */
bt .loop_b1
/* now r5 is always at a long boundary */
/* -> memory reading is done in longs for all dest alignments */
/* selector for main copy loop */
mov r4,r0
tst #3,r0 /* dest now also at long bound? */
bt .loop2_l /* yes, do long copy */
tst #1,r0 /* dest now at least at word bound? */
bt .start4_w /* yes, do word copy */
.end_b1:
mov r6,r3 /* move end address to r3 */
mov #3,r1
and r4,r1 /* r1 = dest alignment offset */
sub r1,r4 /* r4 now long aligned */
mova .jmptab,r0
mov.b @(r0,r1),r1 /* select appropriate main loop */
add r0,r1
jmp @r1 /* and jump to it */
add #-7,r3 /* adjust end addr for main loops doing 2 longs/pass */
/* main loop for byte aligned destination (fast) */
/* copies 1 long per pass */
add #4,r3 /* reset end offset */
add #-1,r4 /* adjust to word alignment for word write+ */
/** main loops, copying 2 longs per pass to profit from fast page mode **/
.loop4_b:
mov.l @r5+,r0 /* load a long & increment source addr */
/* long aligned destination (fastest) */
.align 2
.loop_do0:
mov.l @r5+,r1 /* load first long & increment source addr */
add #8,r4 /* increment dest addr */
mov.l @r5+,r0 /* load second long & increment source addr */
cmp/hi r5,r3 /* runs r5 up to last or second last long bound */
mov.l r1,@r4 /* store first long */
mov.l r0,@(4,r4) /* store second long; NOT ALIGNED - no speed loss here! */
bt .loop_do0
add #4,r3 /* readjust end address */
cmp/hi r5,r3 /* one long left? */
bf .start_b2 /* no, jump to trailing byte loop */
mov.l @r5+,r0 /* load last long & increment source addr */
add #4,r4 /* increment dest addr */
mov.b r0,@(8,r4) /* store low byte */
shlr8 r0 /* get middle 2 bytes */
mov.w r0,@(6,r4) /* store as word+ */
shlr16 r0 /* get upper byte */
mov.b r0,@(5,r4) /* and store */
cmp/hi r5,r3 /* runs r5 up to last long bound */
bt .loop4_b
bra .start_b2 /* jump to trailing byte loop */
add #1,r4 /* readjust */
mov.l r0,@(4,r4) /* store last long */
/* main loop for word aligned destination (faster) */
/* copies 2 longs per pass, utilizing fast page mode */
.start4_w:
add #-2,r4 /* adjust to long alignment for long write+ */
.loop4_w:
/* word aligned destination (long + 2) */
.align 2
.loop_do2:
mov.l @r5+,r1 /* load first long & increment source addr */
add #8,r4 /* increment dest addr */
mov.l @r5+,r0 /* load second long & increment source addr */
cmp/hi r5,r3 /* runs r5 up to last or second last long bound */
mov.w r0,@(8,r4) /* store low word of second long */
xtrct r1,r0 /* extract low word of first long & high word of second long */
mov.l r0,@(4,r4) /* and store as long+ */
mov.l r0,@(4,r4) /* and store as long */
swap.w r1,r0 /* get high word of first long */
mov.w r0,@(2,r4) /* and store it */
bt .loop4_w
bt .loop_do2
add #2,r4 /* readjust destination */
add #4,r3 /* reset end offset */
add #4,r3 /* readjust end address */
cmp/hi r5,r3 /* one long left? */
bf .start_b2 /* no, jump to trailing byte loop */
@ -137,27 +136,77 @@ _memcpy:
bra .start_b2 /* jump to trailing byte loop */
mov.w r0,@(4,r4) /* and store it */
/* main loop for long aligned destination (fastest) */
/* copies 2 longs per pass, utilizing fast page mode */
.loop2_l:
/* jumptable for loop selector */
.align 2
.jmptab:
.byte .loop_do0 - .jmptab /* placed in the middle because the SH1 */
.byte .loop_do1 - .jmptab /* loads bytes sign-extended. Otherwise */
.byte .loop_do2 - .jmptab /* the last loop would be out of reach */
.byte .loop_do3 - .jmptab /* of the offset range. */
/* byte aligned destination (long + 1) */
.align 2
.loop_do1:
mov.l @r5+,r1 /* load first long & increment source addr */
add #8,r4 /* increment dest addr */
mov.l @r5+,r0 /* load second long & increment source addr */
mov r1,r2 /* copy first long */
mov.b r0,@(8,r4) /* store low byte of second long */
shlr8 r0 /* get upper 3 bytes */
shll16 r2 /* move low byte of first long all the way up, .. */
shll8 r2
or r0,r2 /* ..combine with the 3 bytes of second long.. */
mov r1,r0 /* copy first long to r0 */
mov.l r2,@(4,r4) /* ..and store as long */
shlr8 r0 /* get middle 2 bytes */
mov.w r0,@(2,r4) /* store as word */
shlr16 r0 /* get upper byte */
mov.b r0,@(1,r4) /* and store */
cmp/hi r5,r3 /* runs r5 up to last or second last long bound */
mov.l r1,@r4 /* store first long */
mov.l r0,@(4,r4) /* store second long; NOT ALIGNED - no speed loss here! */
bt .loop2_l
bt .loop_do1
add #4,r3 /* reset end offset */
.last_do13:
add #4,r3 /* readjust end address */
cmp/hi r5,r3 /* one long left? */
bf .start_b2 /* no, jump to trailing byte loop */
bf .end_do13 /* no, get out of here */
mov.l @r5+,r0 /* load last long & increment source addr */
add #4,r4 /* increment dest addr */
bra .start_b2 /* jump to trailing byte loop */
mov.l r0,@(4,r4) /* store last long */
mov.b r0,@(8,r4) /* store low byte */
shlr8 r0 /* get middle 2 bytes */
mov.w r0,@(6,r4) /* store as word */
shlr16 r0 /* get upper byte */
mov.b r0,@(5,r4) /* and store */
/* trailing byte loop: copies 0..3 bytes (or all for < 12 in total) */
.end_do13:
bra .start_b2 /* jump to trailing byte loop */
add #1,r4 /* readjust destination */
/* byte aligned destination (long + 3) */
.align 2
.loop_do3:
mov.l @r5+,r1 /* load first long & increment source addr */
add #8,r4 /* increment dest addr */
mov.l @r5+,r0 /* load second long & increment source addr */
mov r1,r2 /* copy first long */
mov.b r0,@(10,r4) /* store low byte of second long */
shlr8 r0 /* get middle 2 bytes */
mov.w r0,@(8,r4) /* store as word */
shlr16 r0 /* get upper byte */
shll8 r2 /* move lower 3 bytes of first long one up.. */
or r2,r0 /* ..combine with the 1 byte of second long.. */
mov.l r0,@(4,r4) /* ..and store as long */
swap.w r1,r0 /* swap-copy first long */
shlr8 r0 /* get original upper byte.. */
cmp/hi r5,r3 /* runs r5 up to last or second last long bound */
mov.b r0,@(3,r4) /* ..and store */
bt .loop_do3
bra .last_do13 /* handle last longword: reuse routine for (long + 1) */
add #2,r4 /* correct the offset difference to do1 */
/* trailing byte loop: copies 0..3 bytes (or all for < 11 in total) */
.align 2
.loop_b2:
mov.b @r5+,r0 /* load byte & increment source addr */
add #1,r4 /* increment dest addr */