devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Fix manual build in 018c54ad1c

Browse source 
Change-Id: If0bce46e161b1f61543c73a4417eda1c179c34a7
This commit is contained in:
Dana Conrad 2024-09-15 15:03:00 -05:00 • committed by Solomon Peachy
parent 607adf00b5
commit bb1c2ea0b1
2 changed files with 18 additions and 22 deletions
Download patch file Download diff file Expand all files Collapse all files

12
manual/getting_started/hibyos_nativeinstall.tex
View file

@ -5,13 +5,12 @@ mode. The process is summed up as the following:
\item Determine what hardware version your player is and download
the correct bootloader update file
\item Place the bootloader \fname{update.upt} file on the SD card
\item In the original firmware, run the Firmware Update
\code{System Settings --> Firmware Update}
\item In the original firmware, run the Firmware Update: \\
\fname{System Settings --> Firmware Update}
\end{itemize}
\subsubsection{Determine hardware version}\label{ref:determine_hardware_version}
Determine what hardware version your player is. Go to
\code{System Settings --> About The Player --> Version} and reference
Determine what hardware version your player is. Go to \fname{System Settings --> About The Player --> Version} and reference
the list below. hw1, hw1.5, and hw2 players all use the same update
file (with one exception), while hw3 players use a different one.
@ -32,10 +31,9 @@ may not be the most up to date, please see the wiki page at
\item Hifiwalker H2 V1.1 - V1.6
\item Surfans F20 V2.2 - V2.7
\end{itemize}
These players use \fname{erosqnative-hw1hw2-erosq.upt} as the update file.
The lone exception is the Hifiwalker H2 V1.3, which uses the update file
\fname{erosqnative-hw1hw2-eros_h2.upt}.
\fname{erosqnative-hw1hw2-eros\_h2.upt}.
\item[hw3 players]
\begin{itemize}
\item Aigo Eros Q V2.1
@ -61,6 +59,6 @@ Don't forget to safely eject/unmount your player.
\subsubsection{Run Firmware Update}\label{ref:run_firmware_update}
In the original firmware, run the firmware updater by going to
\code{System Settings --> Firmware Update}. At this point, you can delete
\fname{System Settings --> Firmware Update}. At this point, you can delete
\fname{update.upt} from the SD card if you wish. \emph{Do not delete .rockbox,
this is your Rockbox installation and needs to stay there!}

18
manual/getting_started/installation.tex
View file

@ -118,15 +118,15 @@ of before installing.
\begin{description}
\item[Filesystem support.] Rockbox only supports the FAT32 filesystem. Other
filesystems such as exFAT or NTFS are not supported.
\opt{erosqnative}{\note{Many SD cards come with exFAT on them from the
\opt{erosqnative}{
\note{Many SD cards come with exFAT on them from the
factory. The original firmware can be used to reformat them to FAT
by going to \code{System Settings --> Reset --> Format TF Card}.}}
by going to: \fname{System Settings --> Reset --> Format TF Card}.}
\note{The SD card that sometimes come bundled with these players are usually
of substandard quality and are not to be trusted. It is recommended to source
a card of a reputable brand, from a reputable source, such as direct from
the manufacturer.}}
the manufacturer.}
}
\item[USB DAC.] This feature is not supported by Rockbox, but you can
dual-boot the original firmware if you want to use it.
\opt{shanlingq1,agptekrocker,xduoox3ii,xduoox20,aigoerosq,erosqnative}{\item[Wireless.] There is no support for Bluetooth\opt{shanlingq1}{ or WiFi}.
@ -837,11 +837,9 @@ completely follow the manual uninstallation instructions below.}}
uninstallation procedure can then be done as follows:
\begin{itemize}
\item If the update file is unmodified, use \fname{tools/hibyos_nativepatcher/hibyos_nativepatcher.sh}
to mark the original bootloader for updating
\item Place the update file on the SD card and ensure it is named \emph{exactly}
\fname{update.upt}
\item Boot into the Rockbox bootloader menu: With the player off, hold \ButtonVolUp + \ButtonPower
\item If the update file is unmodified, use \fname{tools/hibyos\_nativepatcher/hibyos\_nativepatcher.sh} to mark the original bootloader for updating
\item Place the update file on the SD card and ensure it is named \emph{exactly} \fname{update.upt}
\item Boot into the Rockbox bootloader menu: With the player off, hold \ButtonVolUp{} + \ButtonPower{}
\item Select "Aigo Recovery"
\end{itemize}
}