1
0
Fork 0
forked from len0rd/rockbox

Major change to musepack decoder: Import v1.3.0 (r458 from svn.musepack.net) to rockbox. Several adaptions in the musepack decoder were made to get the library work and perform fast under rockbox on several targets. With this change mpc sv8 is supported, including seek, replay gain and metadata support. The decoding speed is a 1-4% lower than the last implementation. Reason for this is main restructuring in the bitstream demuxer.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25056 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Andree Buschmann 2010-03-07 19:34:44 +00:00
parent ce92b8bf34
commit b3d9578c27
36 changed files with 3204 additions and 2807 deletions

View file

@ -1,5 +1,5 @@
/*
Copyright (c) 2005, The Musepack Development Team
Copyright (c) 2005-2009, The Musepack Development Team
All rights reserved.
Redistribution and use in source and binary forms, with or without
@ -31,107 +31,71 @@
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/// \file decoder.h
#ifndef _MPCDEC_DECODER_H_
#define _MPCDEC_DECODER_H_
#ifdef WIN32
#pragma once
#endif
#ifndef _mpcdec_decoder_h_
#define _mpcdec_decoder_h_
#include "huffman.h"
#include "math.h"
#include "musepack.h"
#include "reader.h"
#include "streaminfo.h"
// define this to enable/disable support for streamversion SV4-6
//#define MPC_SUPPORT_SV456
#ifdef __cplusplus
extern "C" {
#endif
// SCF_HACK is used to avoid possible distortion after seeking with mpc files
// background: scf's are coded differential in time domain. if you seek to the
// desired postion it might happen that the baseline is missed and the resulting
// scf is much too high (hissing noise). this hack uses the lowest scaling until
// a non-differential scf could be decoded after seek. through this hack subbands
// are faded out until there was at least a single non-differential scf found.
#define SCF_HACK
#define SEEKING_TABLE_SIZE 256u
// set it to SLOW_SEEKING_WINDOW to not use fast seeking
#define FAST_SEEKING_WINDOW 32
// set it to FAST_SEEKING_WINDOW to only use fast seeking
#define SLOW_SEEKING_WINDOW 0x80000000
enum {
MPC_V_MEM = 2304,
MPC_DECODER_MEMSIZE = 16384, // overall buffer size (words)
MPC_SEEK_BUFFER_SIZE = 8192, // seek buffer size (words)
MPC_V_MEM = 2304,
MPC_DECODER_MEMSIZE = 16384, // overall buffer size
};
typedef struct {
mpc_int16_t L [36];
mpc_int16_t R [36];
} QuantTyp;
typedef struct mpc_decoder_t {
mpc_reader *r;
struct mpc_decoder_t {
/// @name internal state variables
//@{
mpc_uint32_t stream_version; ///< Streamversion of stream
mpc_int32_t max_band; ///< Maximum band-index used in stream (0...31)
mpc_uint32_t ms; ///< Mid/side stereo (0: off, 1: on)
mpc_uint32_t channels; ///< Number of channels in stream
mpc_uint32_t next;
mpc_uint32_t dword; /// currently decoded 32bit-word
mpc_uint32_t pos; /// bit-position within dword
mpc_uint32_t *Speicher; /// read-buffer
mpc_uint32_t Zaehler; /// actual index within read-buffer
mpc_uint32_t Ring;
mpc_uint64_t samples; ///< Number of samples in stream
mpc_uint32_t samples_to_skip;
mpc_uint32_t last_block_samples;
mpc_uint32_t FwdJumpInfo;
mpc_uint32_t ActDecodePos;
mpc_uint32_t DecodedFrames;
mpc_uint32_t OverallFrames;
mpc_int32_t SampleRate; // Sample frequency
mpc_uint32_t StreamVersion; // version of bitstream
mpc_int32_t Max_Band;
mpc_uint32_t MPCHeaderPos; // AB: needed to support ID3v2
mpc_uint32_t FrameWasValid;
mpc_uint32_t MS_used; // MS-coding used ?
mpc_uint32_t TrueGaplessPresent;
mpc_uint32_t WordsRead; // counts amount of decoded dwords
mpc_uint64_t decoded_samples; ///< Number of samples decoded from file begining
mpc_uint32_t samples_to_skip; ///< Number samples to skip (used for seeking)
mpc_int32_t last_max_band; ///< number of bands used in the last frame
// randomizer state variables
mpc_uint32_t __r1;
mpc_uint32_t __r2;
mpc_uint32_t __r1;
mpc_uint32_t __r2;
mpc_int8_t SCF_Index_L [32] [3];
mpc_int8_t SCF_Index_R [32] [3]; // holds scalefactor-indices
QuantTyp Q [32]; // holds quantized samples
mpc_int8_t Res_L [32];
mpc_int8_t Res_R [32]; // holds the chosen quantizer for each subband
#ifdef MPC_SUPPORT_SV456
mpc_int32_t SCF_Index_L [32] [3];
mpc_int32_t SCF_Index_R [32] [3]; // holds scalefactor-indices
mpc_quantizer Q [32]; // holds quantized samples
mpc_int32_t Res_L [32];
mpc_int32_t Res_R [32]; // holds the chosen quantizer for each subband
mpc_bool_t DSCF_Flag_L [32];
mpc_bool_t DSCF_Flag_R [32]; // differential SCF used?
#endif
mpc_int8_t SCFI_L [32];
mpc_int8_t SCFI_R [32]; // describes order of transmitted SCF
mpc_int32_t SCFI_L [32];
mpc_int32_t SCFI_R [32]; // describes order of transmitted SCF
mpc_bool_t MS_Flag[32]; // MS used?
mpc_uint32_t SeekTableCounter; // used to sum up skip info, if SeekTable_Step != 1
mpc_uint32_t MaxDecodedFrames; // Maximum frames decoded (indicates usable seek table entries)
mpc_uint32_t* SeekTable; // seek table itself
mpc_uint8_t SeekTable_Step; // 1<<SeekTable_Step = frames per table index
mpc_uint32_t SeekTable_Mask; // used to avoid modulo-operation in seek
#ifdef MPC_FIXED_POINT
mpc_uint8_t SCF_shift[256];
#endif
MPC_SAMPLE_FORMAT V_L[MPC_V_MEM + 960];
MPC_SAMPLE_FORMAT V_R[MPC_V_MEM + 960];
MPC_SAMPLE_FORMAT (*Y_L)[32];
MPC_SAMPLE_FORMAT (*Y_R)[32];
MPC_SAMPLE_FORMAT *Y_L;
MPC_SAMPLE_FORMAT *Y_R;
MPC_SAMPLE_FORMAT SCF[256]; ///< holds adapted scalefactors (for clipping prevention)
//@}
};
} mpc_decoder;
#endif // _mpc_decoder_h
#ifdef __cplusplus
}
#endif
#endif