forked from len0rd/rockbox
imx233: implement audioin
Change-Id: I0cf896f59fd2176217d0dd1f6032c3463b936669
This commit is contained in:
Amaury Pouly
parent
57bb7b2d27
commit
ac4e76d072
2 changed files with 168 additions and 6 deletions
|
|
@ -19,26 +19,172 @@
|
|||
*
|
||||
****************************************************************************/
|
||||
#include "audioin-imx233.h"
|
||||
#include "pcm_sampr.h"
|
||||
|
||||
/* values in half-dB, one for each setting */
|
||||
static int audioin_vol[2][4]; /* 0=left, 1=right */
|
||||
static int audioin_select[2]; /* idem */
|
||||
|
||||
void imx233_audioin_preinit(void)
|
||||
{
|
||||
/* Enable AUDIOIN block */
|
||||
imx233_reset_block(&HW_AUDIOIN_CTRL);
|
||||
/* Enable ADC */
|
||||
BF_SET(AUDIOIN_CTRL, CLKGATE);
|
||||
/* Set word-length to 16-bit */
|
||||
BF_SET(AUDIOIN_CTRL, WORD_LENGTH);
|
||||
/* Gate Off */
|
||||
BF_SET(AUDIOIN_CTRL, CLKGATE);
|
||||
}
|
||||
|
||||
void imx233_audioin_postinit(void)
|
||||
{
|
||||
}
|
||||
|
||||
void imx233_audioin_open(void)
|
||||
{
|
||||
/* Gate On */
|
||||
BF_CLR(AUDIOIN_CTRL, CLKGATE);
|
||||
/* Enable ADC clock */
|
||||
BF_CLR(AUDIOIN_ANACLKCTRL, CLKGATE);
|
||||
/* Power up ADC (WARNING audioout register) */
|
||||
BF_CLR(AUDIOOUT_PWRDN, ADC);
|
||||
/* Start ADC */
|
||||
BF_SET(AUDIOIN_CTRL, RUN);
|
||||
}
|
||||
|
||||
void imx233_audioin_close(void)
|
||||
{
|
||||
/* TODO mute */
|
||||
/* Gate off ADC */
|
||||
BF_SET(AUDIOIN_ANACLKCTRL, CLKGATE);
|
||||
/* will also gate off the module */
|
||||
/* Stop ADC (doc says it gate off the module but that's not the case) */
|
||||
BF_CLR(AUDIOIN_CTRL, RUN);
|
||||
/* Disable ADC clock */
|
||||
BF_SET(AUDIOIN_ANACLKCTRL, CLKGATE);
|
||||
/* Power down ADC (WARNING audioout register) */
|
||||
BF_SET(AUDIOOUT_PWRDN, ADC);
|
||||
/* Gate Off */
|
||||
BF_SET(AUDIOIN_CTRL, CLKGATE);
|
||||
}
|
||||
|
||||
static void apply_config(void)
|
||||
{
|
||||
int select_l = audioin_select[0];
|
||||
int select_r = audioin_select[1];
|
||||
int vol_l = audioin_vol[0][select_l];
|
||||
int vol_r = audioin_vol[1][select_r];
|
||||
/* Depending on the input, we have three available volumes to tweak:
|
||||
* - adc volume: -100dB -> -0.5dB in 0.5dB steps
|
||||
* - mux gain: 0dB -> 22.5dB in 1.5dB steps
|
||||
* - mic gain: 0dB -> 40dB in 10dB steps (except for 10)
|
||||
*
|
||||
* This means two available volume ranges:
|
||||
* - line1/line2/hp: -100dB -> 22dB in 0.5dB steps
|
||||
* - microphone: -100dB -> 62dB in 0.5dB steps
|
||||
*/
|
||||
|
||||
/* First apply mic gain of possible and necessary
|
||||
* Only left volume is relevant with microphone
|
||||
* If gain is > 22dB, use mic gain */
|
||||
if(select_l == AUDIOIN_SELECT_MICROPHONE && vol_l > 22 * 2)
|
||||
{
|
||||
/* take lowest microphone gain to get back into the -100..22 range
|
||||
* achievable with mux+adc.*/
|
||||
|
||||
/* from 52.5 dB and beyond: 40dB gain */
|
||||
if(vol_l > 52 * 2)
|
||||
{
|
||||
BF_WR_V(AUDIOIN_MICLINE, MIC_GAIN, 40dB);
|
||||
vol_l -= 40 * 2;
|
||||
}
|
||||
/* from 42.5 dB to 52dB: 30dB gain */
|
||||
else if(vol_l > 42 * 2)
|
||||
{
|
||||
BF_WR_V(AUDIOIN_MICLINE, MIC_GAIN, 30dB);
|
||||
vol_l -= 30 * 2;
|
||||
}
|
||||
/* from 22.5 dB to 42dB: 20dB gain */
|
||||
else if(vol_l > 22 * 2)
|
||||
{
|
||||
BF_WR_V(AUDIOIN_MICLINE, MIC_GAIN, 20dB);
|
||||
vol_l -= 20 * 2;
|
||||
}
|
||||
/* otherwise 0dB gain */
|
||||
else
|
||||
BF_WR_V(AUDIOIN_MICLINE, MIC_GAIN, 0dB);
|
||||
}
|
||||
/* max is 22dB */
|
||||
vol_l = MIN(vol_l, 44);
|
||||
vol_r = MIN(vol_r, 44);
|
||||
/* we use the mux volume to reach the volume or higher with 1.5dB steps
|
||||
* and then we use the ADC to go below 0dB or to obtain 0.5dB accuracy */
|
||||
|
||||
int mux_vol_l = MAX(0, (vol_l + 2) / 3); /* 1.5dB = 3 * 0.5dB */
|
||||
int mux_vol_r = MAX(0, (vol_r + 2) / 3);
|
||||
#if IMX233_SUBTARGET >= 3700
|
||||
unsigned adc_zcd = BM_AUDIOIN_ADCVOL_EN_ADC_ZCD;
|
||||
#else
|
||||
unsigned adc_zcd = 0;
|
||||
#endif
|
||||
HW_AUDIOIN_ADCVOL = adc_zcd | BF_OR4(AUDIOIN_ADCVOL, SELECT_LEFT(select_l),
|
||||
SELECT_RIGHT(select_r), GAIN_LEFT(mux_vol_l), GAIN_RIGHT(mux_vol_r));
|
||||
|
||||
vol_l -= mux_vol_l * 3; /* mux vol is in 1.5dB = 3 * 0.5dB steps */
|
||||
vol_r -= mux_vol_l * 3;
|
||||
vol_l = MIN(MAX(-200, vol_l), -1);
|
||||
vol_r = MIN(MAX(-200, vol_r), -1);
|
||||
|
||||
/* unmute, enable zero cross and set volume.
|
||||
* 0xfe is -0.5dB */
|
||||
HW_AUDIOIN_ADCVOLUME = BF_OR3(AUDIOIN_ADCVOLUME, EN_ZCD(1),
|
||||
VOLUME_LEFT(0xff + vol_l), VOLUME_RIGHT(0xff + vol_r));
|
||||
}
|
||||
|
||||
void imx233_audioin_select_mux_input(bool right, int select)
|
||||
{
|
||||
audioin_select[right] = select;
|
||||
apply_config();
|
||||
}
|
||||
|
||||
void imx233_audioin_set_vol(bool right, int vol, int select)
|
||||
{
|
||||
audioin_vol[right][select] = vol;
|
||||
apply_config();
|
||||
}
|
||||
|
||||
void imx233_audioin_enable_mic(bool enable)
|
||||
{
|
||||
if(enable)
|
||||
{
|
||||
BF_WR_V(AUDIOIN_MICLINE, MIC_RESISTOR, 2KOhm);
|
||||
BF_WR(AUDIOIN_MICLINE, MIC_BIAS, 4);
|
||||
BF_WR(AUDIOIN_MICLINE, MIC_SELECT, 1);
|
||||
}
|
||||
else
|
||||
BF_WR_V(AUDIOIN_MICLINE, MIC_RESISTOR, Off);
|
||||
}
|
||||
|
||||
void imx233_audioin_set_freq(int fsel)
|
||||
{
|
||||
static struct
|
||||
{
|
||||
int base_mult;
|
||||
int src_hold;
|
||||
int src_int;
|
||||
int src_frac;
|
||||
}dacssr[HW_NUM_FREQ] =
|
||||
{
|
||||
HW_HAVE_8_([HW_FREQ_8] = { 0x1, 0x3, 0x17, 0xe00 } ,)
|
||||
HW_HAVE_11_([HW_FREQ_11] = { 0x1, 0x3, 0x11, 0x37 } ,)
|
||||
HW_HAVE_12_([HW_FREQ_12] = { 0x1, 0x3, 0xf, 0x13ff },)
|
||||
HW_HAVE_16_([HW_FREQ_16] = { 0x1, 0x1, 0x17, 0xe00},)
|
||||
HW_HAVE_22_([HW_FREQ_22] = { 0x1, 0x1, 0x11, 0x37 },)
|
||||
HW_HAVE_24_([HW_FREQ_24] = { 0x1, 0x1, 0xf, 0x13ff },)
|
||||
HW_HAVE_32_([HW_FREQ_32] = { 0x1, 0x0, 0x17, 0xe00},)
|
||||
HW_HAVE_44_([HW_FREQ_44] = { 0x1, 0x0, 0x11, 0x37 },)
|
||||
HW_HAVE_48_([HW_FREQ_48] = { 0x1, 0x0, 0xf, 0x13ff },)
|
||||
HW_HAVE_64_([HW_FREQ_64] = { 0x2, 0x0, 0x17, 0xe00},)
|
||||
HW_HAVE_88_([HW_FREQ_88] = { 0x2, 0x0, 0x11, 0x37 },)
|
||||
HW_HAVE_96_([HW_FREQ_96] = { 0x2, 0x0, 0xf, 0x13ff },)
|
||||
};
|
||||
|
||||
HW_AUDIOIN_ADCSRR = BF_OR4(AUDIOIN_ADCSRR,
|
||||
SRC_FRAC(dacssr[fsel].src_frac), SRC_INT(dacssr[fsel].src_int),
|
||||
SRC_HOLD(dacssr[fsel].src_hold), BASEMULT(dacssr[fsel].base_mult));
|
||||
}
|
||||
|
|
|
|||
|
|
@ -26,9 +26,25 @@
|
|||
#include "system.h"
|
||||
|
||||
#include "regs/regs-audioin.h"
|
||||
/* some audioout registers impact audioin */
|
||||
#include "regs/regs-audioout.h"
|
||||
|
||||
#define AUDIOIN_SELECT_MICROPHONE 0
|
||||
#define AUDIOIN_SELECT_LINE1 1
|
||||
#define AUDIOIN_SELECT_HEADPHONE 2
|
||||
#define AUDIOIN_SELECT_LINE2 3
|
||||
|
||||
void imx233_audioin_preinit(void);
|
||||
void imx233_audioin_postinit(void);
|
||||
void imx233_audioin_open(void);
|
||||
void imx233_audioin_close(void);
|
||||
/* use AUDIONIN_SELECT_* values */
|
||||
void imx233_audioin_select_mux_input(bool right, int select);
|
||||
/* volume in half dB */
|
||||
void imx233_audioin_set_vol(bool right, int vol, int select);
|
||||
/* frequency index, NOT the frequency itself */
|
||||
void imx233_audioin_set_freq(int fsel);
|
||||
/* enable microphone */
|
||||
void imx233_audioin_enable_mic(bool enable);
|
||||
|
||||
#endif /* __audioin_imx233__ */
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue