devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

hstub: add Sansa Express lcd code

Browse source 
Change-Id: I61fc58e3c97a3666eac98d21226865181b85eef1
This commit is contained in:
Amaury Pouly 2013-12-03 01:34:05 +01:00
parent 1deab73980
commit a15a15ba61
2 changed files with 110 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

97
utils/hwstub/tools/lua/sansaexpress.lua Normal file
View file

@ -0,0 +1,97 @@
--
-- Sansa Express
--
SANSAEXPRESS = {}
function SANSAEXPRESS.set_backlight(val)
STMP.pinctrl.pin(3, 13).muxsel('GPIO')
STMP.pinctrl.pin(3, 13).enable()
STMP.pinctrl.pin(3, 13).clr()
for i = 0, val - 1 do
STMP.pinctrl.pin(3, 13).clr()
STMP.pinctrl.pin(3, 13).set()
end
end
function SANSAEXPRESS.lcd_init()
STMP.lcdif.setup_clock()
STMP.pinctrl.lcdif.setup_system(8, false)
STMP.lcdif.init()
STMP.lcdif.set_word_length(8)
STMP.lcdif.set_system_timing(4, 4, 1, 1)
STMP.lcdif.set_reset(1)
STMP.lcdif.set_reset(0)
STMP.lcdif.set_reset(1)
STMP.lcdif.send_pio(false,
{
0x0a, -- set lower column address: 10
0xa1, -- set segment ramp: 131 -> 0
0xda, -- set COM configuration:
0x12, -- -> use alternative
0xc0, -- set COM scan dir: normal
0xa8, -- set multiplex ratio:
0x3f, -- -> 63MUX
0xd5, -- set display clock freq:
0x50, -- -> divide ratio = 1, osc freq = 5
0xdb, -- set vdcom deselect level
0x08, -- -> 8
0x81, -- set contrast register
0x25, -- -> 0x25
0xad, -- set DCDC on/off
0x8a, -- -> off
0xc8, -- set com output scan: reverse
})
for page = 0, 7 do
STMP.lcdif.send_pio(false,
{
0xb0 + page, -- set page address
0x02, -- set low column address: 2
0x10, -- set higher column address
})
for col = 0, 15 do
STMP.lcdif.send_pio(true, {0, 0, 0, 0, 0, 0, 0, 0})
end
STMP.lcdif.send_pio(true, {0, 0, 0, 0})
end
STMP.lcdif.send_pio(false, {0xaf}) -- turn on panel
-- wait
STMP.lcdif.send_pio(false,
{
0x40, -- set display start line: 0
0xa4, -- set entire display: normal
0xa6, -- set normal display: normal
0xd3, -- set vertical scroll:
0x00, -- -> 0
0xd9, -- set precharge period
0x1f, -- -> 31
})
for page = 0, 7 do
STMP.lcdif.send_pio(false,
{
0xb0 + page, -- set page address
0x02, -- set low column address: 2
0x10, -- set higher column address
})
for col = 0, 15 do
STMP.lcdif.send_pio(true, {0, 0, 0, 0, 0, 0, 0, 0})
end
end
end
function SANSAEXPRESS.set_pixel(x, y, val)
page = math.floor(y / 8)
col = 2 + x -- LCD has two column offset
col_low = bit32.band(col, 0xf)
col_high = bit32.rshift(col ,4)
col_off = y % 8
STMP.lcdif.send_pio(false, {0x00 + col_low, 0x10 + col_high, 0xb0 + page})
print(col_off)
byte = bit32.lshift(val, col_off)
print(byte)
STMP.lcdif.send_pio(true, {byte})
end
function SANSAEXPRESS.init()
SANSAEXPRESS.lcd_init()
SANSAEXPRESS.set_backlight(20)
end

16
utils/hwstub/tools/lua/stmp/lcdif.lua
View file

@ -5,9 +5,11 @@
STMP.lcdif = {}
function STMP.lcdif.setup_clock()
HW.CLKCTRL.CLKSEQ.BYPASS_PIX.set()
HW.CLKCTRL.PIX.CLKGATE.write(0)
HW.CLKCTRL.PIX.DIV.write(1)
if not STMP.is_stmp3600() then
HW.CLKCTRL.CLKSEQ.BYPASS_PIX.set()
HW.CLKCTRL.PIX.CLKGATE.write(0)
HW.CLKCTRL.PIX.DIV.write(1)
end
end
function STMP.lcdif.init()
@ -147,4 +149,12 @@ function STMP.lcdif.send_pio(data_mode, data)
HW.LCDIF.DATA.write(v)
end
STMP.lcdif.wait_ready()
end
function STMP.lcdif.set_mode86(mode86)
if mode86 then
HW.LCDIF.CTRL.MODE86.set()
else
HW.LCDIF.CTRL.MODE86.clr()
end
end