FS#9503 - Sansa v2 audio/PMU communication driver (for the AS3525 SoC)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18886 a1c6a512-1295-4272-9138-f99709370657

bootloader/sansa_as3525.c

@@ -28,10 +28,14 @@
 #include "lcd.h"
 #include "common.h"
 #include "config.h"
+#include "as3525-codec.h"
 
 int show_logo(void);
 void main(void)
 {
+    int i;
+    unsigned char buf[8];
+
     lcd_init_device();
     lcd_clear_display();
 
@@ -43,6 +47,13 @@ void main(void)
 
     show_logo();
 
+    /* show player id to demonstrate communication with codec part */
+    as3525_codec_init();
+    for (i = 0; i < 8; i++) {
+        buf[i] = as3525_codec_read(0x38 + i);
+    }
+    printf("ID: %02X%02X%02X%02X%02X%02X%02X%02X", buf[7], buf[6], buf[5], buf[4], buf[3], buf[2], buf[1], buf[0]);
+    
 #ifdef SANSA_CLIP
     /* Use hardware scrolling */
 

firmware/SOURCES

@@ -1038,6 +1038,7 @@ target/arm/pcm-telechips.c
 #ifndef SIMULATOR
 target/arm/as3525/sansa-clip/lcd-ssd1303.c
 target/arm/as3525/sansa-clip/button-clip.c
+target/arm/as3525/as3525-codec.c
 #endif /* !SIMULATOR */
 #endif /* SANSA_CLIP */
 
@@ -1045,6 +1046,7 @@ target/arm/as3525/sansa-clip/button-clip.c
 #ifndef SIMULATOR
 target/arm/as3525/sansa-e200v2/lcd-e200v2.c
 target/arm/as3525/sansa-e200v2/button-e200v2.c
+target/arm/as3525/as3525-codec.c
 #endif /* !SIMULATOR */
 #endif /* SANSA_E200V2 */
 
@@ -1052,6 +1054,7 @@ target/arm/as3525/sansa-e200v2/button-e200v2.c
 #ifndef SIMULATOR
 target/arm/lcd-ssd1815.c
 target/arm/as3525/sansa-m200v2/button-m200v2.c
+target/arm/as3525/as3525-codec.c
 #endif /* !SIMULATOR */
 #endif /* SANSA_M200V2 */
 

firmware/target/arm/as3525/as3525-codec.c

@@ -0,0 +1,132 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id: $
+ *
+ * Copyright (C) 2008 by Bertrik Sikken
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/*
+    Provides access to the codec/charger/rtc/adc part of the as3525.
+    This part is on address 0x46 of the internal i2c bus in the as3525.
+    Registers in the codec part seem to be nearly identical to the registers
+    in the AS3514 (used in the "v1" versions of the sansa c200 and e200).
+    
+    I2C register description:
+    * I2C2_CNTRL needs to be set to 0x51 for transfers to work at all.
+      bit 1 indicates direction of transfer (0 = write, 1 = read)
+    * I2C2_SR (status register) indicates in bit 0 if a transfer is busy.
+    * I2C2_SLAD0 contains the i2c slave address to read from / write to.
+    * I2C2_CPSR0/1 is the divider from the peripheral clock to the i2c clock.
+    * I2C2_DACNT sets the number of bytes to transfer and actually starts it.
+    
+    When a transfer is attempted to a non-existing i2c slave address,
+    interrupt bit 7 is raised and DACNT is not decremented after the transfer.
+ */
+
+#include "as3525-codec.h"
+#include "as3525.h"
+
+#define AUDIO_I2C_ADDR  0x46
+
+#define I2C2_DATA       *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x00))
+#define I2C2_SLAD0      *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x04))
+#define I2C2_CNTRL      *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x0C))
+#define I2C2_DACNT      *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x10))
+#define I2C2_CPSR0      *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x1C))
+#define I2C2_CPSR1      *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x20))
+#define I2C2_IMR        *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x24))
+#define I2C2_RIS        *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x28))
+#define I2C2_MIS        *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x2C))
+#define I2C2_SR         *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x30))
+#define I2C2_INT_CLR    *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x40))
+#define I2C2_SADDR      *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x44))
+
+
+/* initialises the internal i2c bus and prepares for transfers to the codec */
+void as3525_codec_init(void)
+{
+    /* reset device */
+    CCU_SRC = CCU_SRC_I2C_AUDIO_EN;
+    CCU_SRL = CCU_SRL_MAGIC_NUMBER;
+    CCU_SRL = 0;
+    
+    /* enable clock */
+    CGU_PERI |= CGU_I2C_AUDIO_MASTER_CLOCK_ENABLE;
+
+    /* prescaler for i2c clock */
+    I2C2_CPSR0 = 60;    /* 24 MHz / 400 kHz */
+    I2C2_CPSR1 = 0;     /* MSB */    
+    
+    /* set i2c slave address of codec part */
+    I2C2_SLAD0 = AUDIO_I2C_ADDR << 1;
+
+    I2C2_CNTRL = 0x51;
+}
+
+
+/* returns != 0 when busy */
+static int i2c_busy(void)
+{
+    return (I2C2_SR & 1);
+}
+
+
+/* returns 0 on success, <0 otherwise */
+int as3525_codec_write(int index, int value)
+{
+    if (index == 0x21) {
+        /* prevent setting of the LREG_CP_not bit */
+        value &= ~(1 << 5);
+    }
+    
+    /* check if still busy */
+    if (i2c_busy()) {
+        return -1;
+    }
+    
+    /* start transfer */
+    I2C2_SADDR = index;
+    I2C2_CNTRL &= ~(1 << 1);
+    I2C2_DATA = value;
+    I2C2_DACNT = 1;
+    
+    /* wait for transfer*/
+    while (i2c_busy());
+
+    return 0;
+}
+
+
+/* returns value read on success, <0 otherwise */
+int as3525_codec_read(int index)
+{
+    /* check if still busy */
+    if (i2c_busy()) {
+        return -1;
+    }
+    
+    /* start transfer */
+    I2C2_SADDR = index;
+    I2C2_CNTRL |= (1 << 1);
+    I2C2_DACNT = 1;
+    
+    /* wait for transfer*/
+    while (i2c_busy());
+    
+    return I2C2_DATA;
+}
+

firmware/target/arm/as3525/as3525-codec.h

@@ -0,0 +1,27 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id: $
+ *
+ * Copyright (C) 2008 by Bertrik Sikken
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+void as3525_codec_init(void);
+
+int as3525_codec_write(int index, int value);
+int as3525_codec_read(int index);
+
+