ata: Heavily rework sleep and poweroff logic

* Use of ata_disk_can_poweroff() was inverted, resulting in SATA SSDs
   getting powered off but leaving _everything_ else on, including spinning
   rust!
 * Replace the can_poweroff() heuristic with a test for the mandatory
   ATA power mgmt feature flag. Notably, the CF->SD adapters don't claim
   to support this!
 * Eliminate duplicated tests in sleep code
 * Wrap all poweroff-related code with HAVE_ATA_POWER_OFF
 * Don't ever use SLEEP command, only STANDBY_IMMEDIATE
 * Gate call to STANDBY_IMMEDIATE behind a can_poweroff() test
 * Prefer FLUSH_CACHE_EXT to FLUSH_CACHE where available.
 * Improve SSD detection heuristics to any of these:
   * Explicltly identifies as SSD (covers newer CF and SATA)
   * TRIM support
   * CFA compliant AND (CF level 0 OR high speed support)
 * Report SSD detection in debug menu

Change-Id: I7fcb83b6d6eabddc11c64326a573b08ab85412b5

apps/debug_menu.c

@@ -1074,7 +1074,7 @@ static bool view_battery(void)
 
                 lcd_putsf(0, line++, "State: %s", chrgstate_strings[y]);
 
-                lcd_putsf(0, line++, "%s Switch: %s", "Battery", 
+                lcd_putsf(0, line++, "%s Switch: %s", "Battery",
                          (st & POWER_INPUT_BATTERY) ? "On" : "Off");
 
                 y = chrgraw_adc_voltage();
@@ -1405,6 +1405,7 @@ static int disk_callback(int btn, struct gui_synclist *lists)
     volume_size( IF_MV(0,) NULL, &free );
     simplelist_addline(
              "Free: %ld MB", free / 1024);
+    simplelist_addline("SSD detected: %s", ata_disk_isssd() ? "yes" : "no");
     simplelist_addline(
              "Spinup time: %d ms", storage_spinup_time() * (1000/HZ));
     i = identify_info[82] & (1<<3);
@@ -1512,6 +1513,7 @@ static int disk_callback(int btn, struct gui_synclist *lists)
     i = identify_info[0] & (1 << 7);
     simplelist_addline(
             "Removeable media: %s", i ? "yes" : "no");
+
     return btn;
 }
 

firmware/drivers/ata.c

@@ -58,6 +58,7 @@
 #define CMD_IDENTIFY               0xEC
 #define CMD_SLEEP                  0xE6
 #define CMD_FLUSH_CACHE            0xE7
+#define CMD_FLUSH_CACHE_EXT        0xEA
 #define CMD_SET_FEATURES           0xEF
 #define CMD_SECURITY_FREEZE_LOCK   0xF5
 #ifdef HAVE_ATA_DMA
@@ -105,7 +106,7 @@ static bool lba48 = false; /* set for 48 bit addressing */
 
 static long last_disk_activity = -1;
 #ifdef HAVE_ATA_POWER_OFF
-static long power_off_tick;
+static long power_off_tick = 0;
 #endif
 
 static unsigned long total_sectors;
@@ -152,18 +153,10 @@ static inline bool ata_sleep_timed_out(void)
            TIME_AFTER(current_tick, last_disk_activity + sleep_timeout);
 }
 
-static inline void schedule_ata_power_off(void)
-{
-#ifdef HAVE_ATA_POWER_OFF
-    if (!ata_disk_can_poweroff())
-        power_off_tick = current_tick + ATA_POWER_OFF_TIMEOUT;
-#endif
-}
-
 static inline bool ata_power_off_timed_out(void)
 {
 #ifdef HAVE_ATA_POWER_OFF
-    return TIME_AFTER(current_tick, power_off_tick);
+    return power_off_tick && TIME_AFTER(current_tick, power_off_tick);
 #else
     return false;
 #endif
@@ -230,6 +223,10 @@ static int ata_perform_wakeup(int state)
 
 static int ata_perform_sleep(void)
 {
+    /* If device doesn't support PM features, don't try to sleep. */
+    if (!ata_disk_can_poweroff())
+        return 0; // XXX or return a failure?
+
     logf("ata SLEEP %ld", current_tick);
 
     ATA_OUT8(ATA_SELECT, ata_device);
@@ -244,18 +241,10 @@ static int ata_perform_sleep(void)
         - transitions to PM2:Standby
         - enters Standby_z power condition
 
-      This places the device into a state where power-off is safe, but
+      This places the device into a state where power-off is safe.  We
-      it is not the lowest-theoretical power state -- that is SLEEP, but
+      will cut power at a later time.
-      that is bugged on some SSDs (FC1307A-based).
-
-      TODO: Is there a practical downside to using STANDBY_IMMEDIATE instead
-      of SLEEP, assuming the former spins down the drive?
     */
-    if (ata_disk_isssd()) {
+    ATA_OUT8(ATA_COMMAND, CMD_STANDBY_IMMEDIATE);
-        ATA_OUT8(ATA_COMMAND, CMD_STANDBY_IMMEDIATE);
-    } else {
-        ATA_OUT8(ATA_COMMAND, CMD_SLEEP);
-    }
 
     if (!wait_for_rdy()) {
         DEBUGF("ata_perform_sleep() - CMD failed\n");
@@ -267,11 +256,17 @@ static int ata_perform_sleep(void)
 
 static int ata_perform_flush_cache(void)
 {
-    /* Don't issue the flush cache command if the device
+    uint8_t cmd;
-       doesn't support it, even though it's mandatory.
+
-    */
+    if (identify_info[83] & (1 << 13)) {
-    if (!(identify_info[83] & (1 << 12)))
+        cmd = CMD_FLUSH_CACHE_EXT;
+    } else if (identify_info[83] & (1 << 12)) {
+        cmd = CMD_FLUSH_CACHE;
+    } else {
+        /* If neither (mandatory!) command is supported
+           then don't issue it. */
        return 0;
+    }
 
     logf("ata FLUSH CACHE %ld", current_tick);
 
@@ -282,7 +277,7 @@ static int ata_perform_flush_cache(void)
         return -1;
     }
 
-    ATA_OUT8(ATA_COMMAND, CMD_FLUSH_CACHE);
+    ATA_OUT8(ATA_COMMAND, cmd);
 
     if (!wait_for_rdy()) {
         DEBUGF("ata_perform_flush_cache() - CMD failed\n");
@@ -387,47 +382,6 @@ static ICODE_ATTR void copy_write_sectors(const unsigned char* buf,
 }
 #endif /* !ATA_OPTIMIZED_WRITING */
 
-int ata_disk_isssd(void)
-{
-    /*
-       Offset 217 is "Nominal Rotation rate"
-        0x0000 == Not reported
-        0x0001 == Solid State
-        0x0401 -> 0xffe == RPM
-        All others reserved
-
-        Some CF cards return 0x0100 (ie byteswapped 0x0001) so accept either.
-        However, this is a relatively recent change, and we can't rely on it,
-        especially for the FC1307A CF->SD adapters!
-
-       Offset 168 is "Nominal Form Factor"
-        all values >= 0x06 are guaranteed to be Solid State (mSATA, m.2, etc)
-
-       Offset 83 b2 and/or 86 b2 is set to show device implementes CFA commands
-
-       Offset 169 b0 is set to show device implements TRIM.
-
-       Offset 0 is 0x848a for CF, but that's not guaranteed, because reasons.
-     */
-    return (identify_info[83] & (1<<2) || identify_info[86] & (1<<2) ||
-            (identify_info[168] & 0x0f) >= 0x06 ||
-            identify_info[169] & (1<<0) ||
-            identify_info[217] == 0x0001 || identify_info[217] == 0x0100);
-}
-
-int ata_disk_can_poweroff(void)
-{
-    /* Some SSDs don't like getting powered off, presumably because
-       in the real world they're not in removable form factors and
-       don't expect to have power removed.
-
-       In particular, mSATA, m.2, and MicroSSD are suspect.
-    */
-
-    return ((identify_info[168] & 0x0f) < 0x06 ||
-            (identify_info[168] & 0x0f) > 0x08);
-}
-
 static int ata_transfer_sectors(unsigned long start,
                                 int incount,
                                 void* inbuf,
@@ -903,7 +857,10 @@ void ata_sleepnow(void)
         if (ata_state == ATA_ON) {
             if (!ata_perform_flush_cache() && !ata_perform_sleep()) {
                 ata_state = ATA_SLEEPING;
-                schedule_ata_power_off();
+#ifdef HAVE_ATA_POWER_OFF
+                if (ata_disk_can_poweroff())
+                    power_off_tick = current_tick + ATA_POWER_OFF_TIMEOUT;
+#endif
             }
         }
         mutex_unlock(&ata_mtx);
@@ -1136,7 +1093,7 @@ static int set_features(void)
         unsigned char parameter;
     } features[] = {
         { 83, 14, 0x03, 0 },   /* force PIO mode */
-        { 83, 3, 0x05, 0x80 }, /* adv. power management: lowest w/o standby */  // TODO: What about FC1307A that doesn't advertise this properly?
+        { 83, 3, 0x05, 0x80 }, /* adv. power management: lowest w/o standby */
         { 83, 9, 0x42, 0x80 }, /* acoustic management: lowest noise */
         { 82, 6, 0xaa, 0 },    /* enable read look-ahead */
 #ifdef HAVE_ATA_DMA
@@ -1455,17 +1412,17 @@ int ata_event(long id, intptr_t data)
        the first case is frequently hit anyway. */
     if (LIKELY(id == Q_STORAGE_TICK)) {
         /* won't see ATA_BOOT in here */
-        int state = ata_state;
+        if (ata_state != ATA_ON || !ata_sleep_timed_out()) {
-        if (state != ATA_ON || !ata_sleep_timed_out()) {
+#ifdef HAVE_ATA_POWER_OFF
-            if (state == ATA_SLEEPING && ata_power_off_timed_out()) {
+            if (ata_state == ATA_SLEEPING && ata_power_off_timed_out()) {
+                power_off_tick = 0;
                 mutex_lock(&ata_mtx);
-                if (ata_state == ATA_SLEEPING) {
+                logf("ata OFF %ld", current_tick);
-                    logf("ata OFF %ld", current_tick);
+                ide_power_enable(false);
-                    ide_power_enable(false);
+                ata_state = ATA_OFF;
-                    ata_state = ATA_OFF;
-                }
                 mutex_unlock(&ata_mtx);
             }
+#endif
             STG_EVENT_ASSERT_ACTIVE(STORAGE_ATA);
         }
     }

firmware/export/ata.h

@@ -166,10 +166,58 @@ long ata_last_disk_activity(void);
 int ata_spinup_time(void); /* ticks */
 
 /* Returns 1 if drive is solid-state */
-int ata_disk_isssd(void);
+static inline int ata_disk_isssd(void)
+{
+    unsigned short *identify_info = ata_get_identify();
+    /*
+       Offset 217 is "Nominal Rotation rate"
+        0x0000 == Not reported
+        0x0001 == Solid State
+        0x0401 -> 0xffe == RPM
+        All others reserved
+
+        Some CF cards return 0x0100 (ie byteswapped 0x0001) so accept either.
+        However, this is a relatively recent change, and we can't rely on it,
+        especially for the FC1307A CF->SD adapters!
+
+       Offset 168 is "Nominal Form Factor"
+         all values >= 0x06 are guaranteed to be Solid State (mSATA, m.2, etc)
+
+       Offset 169 b0 is set to show device implements TRIM.
+
+    Unreliable mechanisms:
+
+       Offset 83 b2 shows device implements CFA commands.
+        However microdrives pose a problem as they support CFA but are not
+        SSD.
+
+       Offset 160 b15 indicates support for CF+ power level 1, if not set
+        then device is standard flash CF.  However this is not foolproof
+        as newer CF cards may support it for extra performance.
+
+       Offset 163 shows CF Advanced timing modes; microdrive seems to
+        report 0, but all others (including iFlash) report higher!
+
+       So if device support CFA _AND_ reports higher speeds modes, it is SSD.
+
+     */
+    return ( (identify_info[217] == 0x0001 || identify_info[217] == 0x0100) /* "Solid state" rotational rate */
+             || ((identify_info[168] & 0x0f) >= 0x06)                       /* Explicit SSD form factors */
+             || (identify_info[169] & (1<<0))                               /* TRIM supported */
+             || ((identify_info[83] & (1<<2)) &&                            /* CFA compliant */
+                 (((identify_info[160] & (1<<15)) == 0) ||                     /* CF level 0 */
+                  (identify_info[163] > 0)))                                   /* Advanced timing modes */
+           );
+}
 
 /* Returns 1 if the drive can be powered off safely */
-int ata_disk_can_poweroff(void);
+static inline int ata_disk_can_poweroff(void)
+{
+    unsigned short *identify_info = ata_get_identify();
+    /* Only devices that claim to support PM can be safely powered off.
+       This notably excludes the various SD adapters! */
+    return (identify_info[82] & (1<<3) && identify_info[85] & (1<<3));
+}
 
 #ifdef HAVE_ATA_DMA
 /* Returns current DMA mode */