devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

c100: Get a regular build compiling. Very little functionality.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21153 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Marc Guay 2009-06-01 12:37:25 +00:00
parent f5db6b9ce3
commit 86ce407803
8 changed files with 56 additions and 109 deletions
Download patch file Download diff file Expand all files Collapse all files

2
apps/SOURCES
View file

@ -222,6 +222,8 @@ keymaps/keymap-sa9200.c
keymaps/keymap-hdd1630.c
#elif CONFIG_KEYPAD == IAUDIO67_PAD
keymaps/keymap-iaudio67.c
#elif CONFIG_KEYPAD == SANSA_C100_PAD
keymaps/keymap-c100.c
#elif CONFIG_KEYPAD == LOGIK_DAX_PAD
keymaps/keymap-logikdax.c
#elif CONFIG_KEYPAD == SANSA_FUZE_PAD

19
apps/keymaps/keymap-c100.c
View file

@ -34,15 +34,16 @@
* Insert LAST_ITEM_IN_LIST at the end of each mapping
*/
static const struct button_mapping button_context_standard[] = {
{ ACTION_STD_PREV, BUTTON_LEFT, BUTTON_NONE },
{ ACTION_STD_PREVREPEAT, BUTTON_LEFT|BUTTON_REPEAT, BUTTON_NONE },
{ ACTION_STD_NEXT, BUTTON_RIGHT, BUTTON_NONE },
{ ACTION_STD_NEXTREPEAT, BUTTON_RIGHT|BUTTON_REPEAT, BUTTON_NONE },
{ ACTION_STD_OK, BUTTON_SELECT|BUTTON_REL, BUTTON_SELECT },
{ ACTION_STD_CANCEL, BUTTON_POWER, BUTTON_NONE },
{ ACTION_STD_MENU, BUTTON_DOWN|BUTTON_REL, BUTTON_DOWN },
{ ACTION_STD_CONTEXT, BUTTON_SELECT|BUTTON_REPEAT, BUTTON_SELECT },
{ ACTION_STD_QUICKSCREEN, BUTTON_DOWN|BUTTON_REPEAT, BUTTON_DOWN },
{ ACTION_STD_PREV, BUTTON_UP, BUTTON_NONE },
{ ACTION_STD_PREVREPEAT, BUTTON_UP|BUTTON_REPEAT, BUTTON_NONE },
{ ACTION_STD_NEXT, BUTTON_DOWN, BUTTON_NONE },
{ ACTION_STD_NEXTREPEAT, BUTTON_DOWN|BUTTON_REPEAT, BUTTON_NONE },
{ ACTION_STD_OK, BUTTON_SELECT|BUTTON_REL, BUTTON_SELECT },
{ ACTION_STD_OK, BUTTON_RIGHT, BUTTON_NONE },
{ ACTION_STD_CANCEL, BUTTON_LEFT, BUTTON_NONE },
{ ACTION_STD_MENU, BUTTON_POWER|BUTTON_REL, BUTTON_POWER },
{ ACTION_STD_OK, BUTTON_SELECT|BUTTON_REL, BUTTON_SELECT },
{ ACTION_STD_CONTEXT, BUTTON_SELECT|BUTTON_REPEAT, BUTTON_SELECT },
LAST_ITEM_IN_LIST
}; /* button_context_standard */

13
firmware/SOURCES
View file

@ -1086,18 +1086,19 @@ target/arm/tcc77x/m200/audio-m200.c
#ifdef SANSA_C100
#ifndef SIMULATOR
drivers/nand_id.c
target/arm/tcc77x/adc-tcc77x.c
target/arm/tcc77x/kernel-tcc77x.c
target/arm/tcc77x/c100/lcd-S6B33B2.c
target/arm/tcc77x/powermgmt-tcc77x.c
target/arm/tcc77x/system-tcc77x.c
target/arm/tcc77x/timer-tcc77x.c
target/arm/usb-tcc.c
target/arm/tcc77x/system-tcc77x.c
target/arm/tcc77x/kernel-tcc77x.c
target/arm/tcc77x/timer-tcc77x.c
target/arm/tcc77x/adc-tcc77x.c
target/arm/tcc77x/powermgmt-tcc77x.c
target/arm/tcc77x/c100/lcd-S6B33B2.c
target/arm/tcc77x/c100/button-c100.c
target/arm/tcc77x/c100/power-c100.c
#ifndef BOOTLOADER
target/arm/tcc77x/debug-tcc77x.c
target/arm/pcm-telechips.c
target/arm/tcc77x/c100/audio-c100.c
#endif /* BOOTLOADER */
#endif /* SIMULATOR */
#endif /* SANSA_C100 */

37
firmware/export/config-c100.h
View file

@ -5,15 +5,11 @@
#define MODEL_NAME "Sandisk Sansa c100 series"
/* For Rolo and boot loader */
/* For Rolo and bootloader */
#define MODEL_NUMBER 30
/* define this if you have recording possibility */
//#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
/* define hardware samples rate caps mask */
#define HW_SAMPR_CAPS (/*SAMPR_CAP_88 | */SAMPR_CAP_44/* | SAMPR_CAP_22 | SAMPR_CAP_11*/)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
@ -22,10 +18,10 @@
#define HAVE_LCD_COLOR
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/*#define HAVE_LCD_FLIP*/
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/*#define HAVE_LCD_INVERT*/
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
@ -39,10 +35,13 @@
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* Only v1 */
#define CONFIG_STORAGE STORAGE_NAND
#define CONFIG_NAND NAND_TCC
/* c100's with direct-to-NAND access are FAT16 */
#define HAVE_FAT16SUPPORT
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 64
@ -63,8 +62,11 @@
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x50000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x8000
#define PLUGIN_BUFFER_SIZE 0x50000
#define AB_REPEAT_ENABLE 1
@ -74,6 +76,8 @@
/* Define this if you have the TLV320 audio codec */
#define HAVE_TLV320
/*#define CONFIG_TUNER TEA5767*/
/* TLV320 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
@ -102,14 +106,11 @@
/* Define this to the CPU frequency */
#define CPU_FREQ 120000000
/* Offset ( in the firmware file's header ) to the file length */
#define FIRMWARE_OFFSET_FILE_LENGTH 0
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 4
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 6
#define FIRMWARE_OFFSET_FILE_DATA 8
/* The start address index for ROM builds */
/* #define ROM_START 0x11010 for behind original Archos */
@ -118,11 +119,11 @@
/* Software controlled LED */
#define CONFIG_LED LED_VIRTUAL
#define CONFIG_LCD LCD_S6B33B2 /* Not sure about this... same as C200? - MarcGuay */
#define CONFIG_LCD LCD_S6B33B2
#define BOOTFILE_EXT "c100"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/"
#define BOOTDIR "/.rockbox"
#ifdef BOOTLOADER
#define TCCBOOT

2
firmware/target/arm/pcm-telechips.c
View file

@ -93,6 +93,8 @@ void pcm_play_dma_init(void)
/* TODO */
#elif defined(SANSA_M200)
/* TODO */
#elif defined(SANSA_C100)
/* TODO */
#else
#error "Target isn't supported"
#endif

83
firmware/target/arm/tcc77x/c100/lcd-S6B33B2.c
View file

@ -28,7 +28,6 @@
static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
/* LCD command set for Samsung S6B33B2 */
#define R_NOP 0x00
#define R_OSCILLATION_MODE 0x02
#define R_DRIVER_OUTPUT_MODE 0x10
@ -179,7 +178,7 @@ void lcd_init_device(void)
lcd_send_command(R_SPEC_DISPLAY_PATTERN);
lcd_send_command(0x0);
/* Rockbox init */
lcd_clear_display();
lcd_update();
@ -212,89 +211,27 @@ void lcd_set_flip(bool yesno)
}
/*** update functions ***/
void lcd_yuv_set_options(unsigned options)
{
lcd_yuv_options = options;
}
/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
extern void lcd_write_yuv420_lines(unsigned char const * const src[3],
int width,
int stride);
extern void lcd_write_yuv420_lines_odither(unsigned char const * const src[3],
int width,
int stride,
int x_screen, /* To align dither pattern */
int y_screen);
/* Performance function to blit a YUV bitmap directly to the LCD */
void lcd_blit_yuv(unsigned char * const src[3],
/* TODO: implement me */
void lcd_blit_yuv(unsigned char *const src[3],
int src_x, int src_y, int stride,
int x, int y, int width, int height)
{
unsigned char const * yuv_src[3];
off_t z;
(void) src;
(void) src_x;
(void) src_y;
(void) stride;
(void) x;
(void) y;
/* Sorry, but width and height must be >= 2 or else */
width &= ~1;
height >>= 1;
y += 0x1a;
return;
z = stride*src_y;
yuv_src[0] = src[0] + z + src_x;
yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1);
yuv_src[2] = src[2] + (yuv_src[1] - src[1]);
lcd_send_command(R_ENTRY_MODE);
lcd_send_command(0x80);
lcd_send_command(R_X_ADDR_AREA);
lcd_send_command(x);
lcd_send_command(x + width - 1);
if (lcd_yuv_options & LCD_YUV_DITHER)
{
do
{
lcd_send_command(R_Y_ADDR_AREA);
lcd_send_command(y);
lcd_send_command(y + 1);
/* NOP needed because on some c200s, the previous lcd_send_command
is interpreted as a separate command instead of part of
R_Y_ADDR_AREA. */
lcd_send_command(R_NOP);
lcd_write_yuv420_lines_odither(yuv_src, width, stride, x, y);
yuv_src[0] += stride << 1; /* Skip down two luma lines */
yuv_src[1] += stride >> 1; /* Skip down one chroma line */
yuv_src[2] += stride >> 1;
y += 2;
}
while (--height > 0);
}
else
{
do
{
lcd_send_command(R_Y_ADDR_AREA);
lcd_send_command(y);
lcd_send_command(y + 1);
lcd_send_command(R_NOP);
lcd_write_yuv420_lines(yuv_src, width, stride);
yuv_src[0] += stride << 1; /* Skip down two luma lines */
yuv_src[1] += stride >> 1; /* Skip down one chroma line */
yuv_src[2] += stride >> 1;
y += 2;
}
while (--height > 0);
}
}
/* Update the display.
This must be called after all other LCD functions that change the display. */
void lcd_update(void)

3
tools/configure vendored
View file

@ -1709,7 +1709,7 @@ fi
target_id=42
modelname="c100"
target="-DSANSA_C100"
memory=32 # unsure, must check
memory=2
arm946cc
tool="$rootdir/tools/scramble -add=c100"
boottool="$rootdir/tools/scramble -tcc=crc"
@ -1719,6 +1719,7 @@ fi
output="rockbox.c100"
appextra="recorder:gui"
plugins=""
swcodec="yes"
# toolset is the tools within the tools directory that we build for
# this particular target.
toolset=$tccbitmaptools

6
tools/scramble.c
View file

@ -122,8 +122,8 @@ void usage(void)
"\t (X values: h100, h120, h140, h300, ipco, nano, ipvd, mn2g\n"
"\t ip3g, ip4g, mini, iax5, iam5, iam3, h10, h10_5gb,\n"
"\t tpj2, c200, e200, giga, gigs, m100, m500, d2,\n");
printf("\t 9200, 1630, ldax, m200, clip, e2v2, m2v4, fuze,\n"
"\t c2v2, clv2, y820, y920, y925)\n");
printf("\t 9200, 1630, ldax, m200, c100, clip, e2v2, m2v4,\n"
"\t fuze, c2v2, clv2, y820, y920, y925)\n");
printf("\nNo option results in Archos standard player/recorder format.\n");
exit(1);
@ -278,6 +278,8 @@ int main (int argc, char** argv)
modelnum = 25;
else if (!strcmp(&argv[1][5], "m200"))
modelnum = 29;
else if(!strcmp(&argv[1][5], "c100"))
modelnum = 30;
else if(!strcmp(&argv[1][5], "1630")) /* Philips HDD1630 */
modelnum = 31;
else if (!strcmp(&argv[1][5], "i7"))