devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Code for alarm mod. Enable with adding -DHAVE_ALARM_MOD in Makefile (EXTRA_DEFINES).

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@3150 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Uwe Freese 2003-01-22 12:50:34 +00:00
parent fa22295598
commit 86352ccc3f
7 changed files with 388 additions and 6 deletions
Download patch file Download diff file Expand all files Collapse all files

80
firmware/drivers/rtc.c
View file

@ -7,7 +7,7 @@
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Linus Nielsen Feltzing
* Copyright (C) 2002 by Linus Nielsen Feltzing, Uwe Freese
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
@ -20,6 +20,7 @@
#ifdef HAVE_RTC
#include "i2c.h"
#include "rtc.h"
#include <stdbool.h>
#define RTC_ADR 0xd0
#define RTC_DEV_WRITE (RTC_ADR | 0x00)
@ -43,8 +44,85 @@ void rtc_init(void)
data &= ~0x40;
rtc_write(0x0c,data);
}
#ifdef HAVE_ALARM_MOD
/* Clear Trec bit, write-protecting the RTC for 200ms when shutting off */
/* without this, the alarm won't work! */
data = rtc_read(0x04);
if (data & 0x80)
{
data &= ~0x80;
rtc_write(0x04, data);
}
rtc_enable_alarm(false);
#endif
}
#ifdef HAVE_ALARM_MOD
/* set alarm time registers to the given time (repeat once per day) */
void rtc_set_alarm(int h, int m)
{
unsigned char data;
/* for daily alarm, RPT5=RPT4=on, RPT1=RPT2=RPT3=off */
rtc_write(0x0e, 0x00); /* seconds 0 and RTP1 */
rtc_write(0x0d, ((m / 10) << 4) | (m % 10)); /* minutes and RPT2 */
rtc_write(0x0c, ((h / 10) << 4) | (h % 10)); /* hour and RPT3 */
rtc_write(0x0b, 0xc1); /* set date 01 and RPT4 and RTP5 */
/* set month to 1, if it's invalid, the rtc does an alarm every second instead */
data = rtc_read(0x0a);
data &= 0xe0;
data |= 0x01;
rtc_write(0x0a, data);
}
/* read out the current alarm time */
void rtc_get_alarm(int *h, int *m)
{
unsigned char data;
data = rtc_read(0x0c);
*h = ((data & 0x30) >> 4) * 10 + (data & 0x0f);
data = rtc_read(0x0d);
*m = ((data & 0x70) >> 4) * 10 + (data & 0x0f);
}
/* turn alarm on or off by setting the alarm flag enable */
/* the alarm is automatically disabled when the RTC gets Vcc power at startup */
/* avoid that an alarm occurs when the device is on because this locks the ON key forever */
/* returns false if alarm was set and alarm flag (output) is off */
/* returns true if alarm flag went on, which would lock the device, so the alarm was disabled again */
bool rtc_enable_alarm(bool enable)
{
unsigned char data = rtc_read(0x0a);
if (enable)
{
data |= 0xa0; /* turn bit d7=AFE and d5=ABE on */
}
else
data &= 0x5f; /* turn bit d7=AFE and d5=ABE off */
rtc_write(0x0a, data);
/* check if alarm flag AF is off (as it sould be) */
if ((rtc_read(0x0f) & 0x40) != 0) /* on */
{
data &= 0x5f; /* turn bit d7=AFE and d5=ABE off */
rtc_write(0x0a, data);
return true;
} else {
return false; /* all ok */
}
}
#endif /* HAVE_ALARM_MOD */
int rtc_write(unsigned char address, unsigned char value)
{
int ret = 0;