devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Removed remnants of deprecated lcd_roll().

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11409 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Jens Arnold 2006-10-31 19:49:35 +00:00
parent aa11d68f46
commit 84074cd292
3 changed files with 3 additions and 31 deletions
Download patch file Download diff file Expand all files Collapse all files

1
firmware/export/lcd-remote.h
View file

@ -121,7 +121,6 @@ extern void lcd_remote_update_rect(int x, int y, int width, int height);
extern void lcd_remote_set_invert_display(bool yesno);
extern void lcd_remote_set_flip(bool yesno);
extern void lcd_remote_roll(int pixels);
extern void lcd_remote_set_drawmode(int mode);
extern int lcd_remote_get_drawmode(void);

1
firmware/export/lcd.h
View file

@ -292,7 +292,6 @@ struct bitmap {
extern void lcd_set_invert_display(bool yesno);
extern void lcd_set_flip(bool yesno);
extern void lcd_roll(int pixels);
extern void lcd_set_drawmode(int mode);
extern int lcd_get_drawmode(void);

32
firmware/target/coldfire/iaudio/x5/lcd-x5.c
View file

@ -50,9 +50,6 @@ static unsigned short r_gate_scan_start_pos = 0x0002;
static unsigned short r_drv_output_control = 0x0313;
static unsigned short r_horiz_ram_addr_pos = 0x7f00;
/* Rolling */
static int roll_offset = 0; /* Amount of roll offset (0-127). */
/* Dithering */
#define R_ENTRY_MODE_SOLID 0x1038
#define R_ENTRY_MODE_DIT 0x9038
@ -191,25 +188,6 @@ void lcd_set_flip(bool yesno)
lcd_write_reg(R_HORIZ_RAM_ADDR_POS, r_horiz_ram_addr_pos);
}
/* Rolls up the lcd display by the specified amount of lines.
* Lines that are rolled out over the top of the screen are
* rolled in from the bottom again. This is a hardware
* remapping only and all operations on the lcd are affected.
* ->
* @param int lines - The number of lines that are rolled.
* The value must be 0 <= pixels < LCD_HEIGHT.
* Call lcd_update() afterwards */
void lcd_roll(int lines)
{
/* Just allow any value mod LCD_HEIGHT-1. Assumes LCD_HEIGHT == 128. */
if (lines < 0)
lines = -lines & 127;
else
lines = (128 - (lines & 127)) & 127;
roll_offset = lines;
}
static void lcd_power_on(void)
{
/* Be sure standby bit is clear. */
@ -399,7 +377,6 @@ void lcd_init_device(void)
lcd_set_contrast(DEFAULT_CONTRAST_SETTING);
lcd_set_invert_display(false);
lcd_set_flip(false);
lcd_roll(0);
hw_dither(false); /* do this or all bootloaders will need reflashing */
#endif
}
@ -484,8 +461,7 @@ void lcd_yuv_blit(unsigned char * const src[3],
height = (height + 1) & ~1;
/* Set start position and window */
lcd_write_reg(R_RAM_ADDR_SET, (x << 8) |
(((y + roll_offset) & 127) + y_offset));
lcd_write_reg(R_RAM_ADDR_SET, (x << 8) | (y + y_offset));
lcd_write_reg(R_VERT_RAM_ADDR_POS, ((x + width - 1) << 8) | x);
lcd_begin_write_gram();
@ -522,8 +498,7 @@ void lcd_update(void)
hw_dither(false);
/* Set start position and window */
/* Just add roll offset to start address. CP will roll back around. */
lcd_write_reg(R_RAM_ADDR_SET, y_offset + roll_offset); /* X == 0 */
lcd_write_reg(R_RAM_ADDR_SET, y_offset); /* X == 0 */
lcd_write_reg(R_VERT_RAM_ADDR_POS, (LCD_WIDTH-1) << 8);
lcd_begin_write_gram();
@ -560,8 +535,7 @@ void lcd_update_rect(int x, int y, int width, int height)
return; /* nothing left to do */
/* Set start position and window */
lcd_write_reg(R_RAM_ADDR_SET, (x << 8) |
(((y + roll_offset) & 127) + y_offset));
lcd_write_reg(R_RAM_ADDR_SET, (x << 8) | (y + y_offset));
lcd_write_reg(R_VERT_RAM_ADDR_POS, ((x + width - 1) << 8) | x);
lcd_begin_write_gram();