devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Added I/O address detection for CONTROL/ALT_STATUS

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@976 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Linus Nielsen Feltzing 2002-06-12 13:51:31 +00:00
parent 558c9247f4
commit 8169c8f5bd
1 changed files with 47 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

50
firmware/drivers/ata.c
View file

@ -35,7 +35,11 @@
#define ATA_SELECT (*((volatile unsigned char*)0x06100106)) #define ATA_SELECT (*((volatile unsigned char*)0x06100106))
#define ATA_COMMAND (*((volatile unsigned char*)0x06100107)) #define ATA_COMMAND (*((volatile unsigned char*)0x06100107))
#define ATA_STATUS (*((volatile unsigned char*)0x06100107)) #define ATA_STATUS (*((volatile unsigned char*)0x06100107))
#define ATA_CONTROL (*((volatile unsigned char*)0x06200206))
#define ATA_CONTROL1 ((volatile unsigned char*)0x06200206)
#define ATA_CONTROL2 ((volatile unsigned char*)0x06200306)
#define ATA_CONTROL (*ata_control)
#define ATA_ALT_STATUS ATA_CONTROL #define ATA_ALT_STATUS ATA_CONTROL
#define SELECT_DEVICE1 0x10 #define SELECT_DEVICE1 0x10
@ -59,6 +63,8 @@
static struct mutex ata_mtx; static struct mutex ata_mtx;
static char device; /* device 0 (master) or 1 (slave) */ static char device; /* device 0 (master) or 1 (slave) */
static volatile unsigned char* ata_control;
static int wait_for_bsy(void) static int wait_for_bsy(void)
{ {
int timeout = current_tick + HZ*4; int timeout = current_tick + HZ*4;
@ -299,7 +305,7 @@ int ata_soft_reset(void)
return ret; return ret;
} }
static int master_slave(void) static int master_slave_detect(void)
{ {
/* master? */ /* master? */
ATA_SELECT = 0; ATA_SELECT = 0;
@ -320,6 +326,41 @@ static int master_slave(void)
return 0; return 0;
} }
static int io_address_detect(void)
{
unsigned char tmp = ATA_STATUS;
unsigned char dummy;
/* We compare the STATUS register with the ALT_STATUS register, which
is located at the same address as CONTROL. If they are the same, we
assume that we have the correct address.
We can't read the ATA_STATUS directly, since the read data will stay
on the data bus if the following read does not assert the Chip Select
to the ATA controller. We read a register that we know exists to make
sure that the data on the bus isn't identical to the STATUS register
contents. */
dummy = ATA_SECTOR;
if(tmp == *ATA_CONTROL2)
{
DEBUGF("CONTROL is at 0x306\n");
ata_control = ATA_CONTROL2;
}
else
{
DEBUGF("CONTROL is at 0x206\n");
ata_control = ATA_CONTROL1;
}
/* Let's check again, to be sure */
if(tmp != ATA_CONTROL)
{
DEBUGF("ATA I/O address detection failed\n");
return -1;
}
return 0;
}
int ata_init(void) int ata_init(void)
{ {
mutex_init(&ata_mtx); mutex_init(&ata_mtx);
@ -329,9 +370,12 @@ int ata_init(void)
PADR |= 0x800; /* disable USB */ PADR |= 0x800; /* disable USB */
PADR &= ~0x80; /* activate ATA */ PADR &= ~0x80; /* activate ATA */
if (master_slave()) if (master_slave_detect())
return -1; return -1;
if (io_address_detect())
return -2;
if (check_registers()) if (check_registers())
return -3; return -3;