devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Preparations for implementing the new graphics api: Ordered lcd bitmap driver defines, variables and functions by function groups. Centralised some definitions, code cleanup.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6844 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Jens Arnold 2005-06-23 16:53:54 +00:00
parent bec1afada5
commit 6a556c1740
6 changed files with 1511 additions and 1601 deletions
Download patch file Download diff file Expand all files Collapse all files

848
firmware/drivers/lcd-h100-remote.c
View file

@ -19,6 +19,7 @@
#include "config.h" #include "config.h"
#include "cpu.h" #include "cpu.h"
#include "lcd.h"
#include "lcd-remote.h" #include "lcd-remote.h"
#include "kernel.h" #include "kernel.h"
#include "thread.h" #include "thread.h"
@ -29,64 +30,25 @@
#include "system.h" #include "system.h"
#include "font.h" #include "font.h"
/* All zeros and ones bitmaps for area filling */ /*** definitions ***/
static const unsigned char zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
static const unsigned char ones[8] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
};
static int curfont = FONT_SYSFIXED; #define LCD_REMOTE_CNTL_ADC_NORMAL 0xa0
static int xmargin = 0; #define LCD_REMOTE_CNTL_ADC_REVERSE 0xa1
static int ymargin = 0; #define LCD_REMOTE_CNTL_SHL_NORMAL 0xc0
#ifndef SIMULATOR #define LCD_REMOTE_CNTL_SHL_REVERSE 0xc8
static int xoffset; /* needed for flip */ #define LCD_REMOTE_CNTL_DISPLAY_ON_OFF 0xae
#endif #define LCD_REMOTE_CNTL_ENTIRE_ON_OFF 0xa4
#define LCD_REMOTE_CNTL_REVERSE_ON_OFF 0xa6
unsigned char lcd_remote_framebuffer[LCD_REMOTE_HEIGHT/8][LCD_REMOTE_WIDTH] #define LCD_REMOTE_CNTL_NOP 0xe3
#ifndef SIMULATOR #define LCD_REMOTE_CNTL_POWER_CONTROL 0x2b
__attribute__ ((section(".idata"))) #define LCD_REMOTE_CNTL_SELECT_REGULATOR 0x20
#endif #define LCD_REMOTE_CNTL_SELECT_BIAS 0xa2
; #define LCD_REMOTE_CNTL_SELECT_VOLTAGE 0x81
#define LCD_REMOTE_CNTL_INIT_LINE 0x40
#define SCROLL_SPACING 3 #define LCD_REMOTE_CNTL_SET_PAGE_ADDRESS 0xB0
#define SCROLLABLE_LINES 26
struct scrollinfo {
char line[MAX_PATH + LCD_REMOTE_WIDTH/2 + SCROLL_SPACING + 2];
int len; /* length of line in chars */
int width; /* length of line in pixels */
int offset;
int startx;
bool backward; /* scroll presently forward or backward? */
bool bidir;
bool invert; /* invert the scrolled text */
long start_tick;
};
static volatile int scrolling_lines=0; /* Bitpattern of which lines are scrolling */
#ifndef SIMULATOR
static int countdown; /* for remote plugging debounce */
static bool last_remote_status = false;
static bool init_remote = false; /* scroll thread should init lcd */
static bool remote_initialized = false;
/* cached settings values, for hotplug init */
static bool cached_invert = false;
static bool cached_flip = false;
static int cached_contrast = 32;
static int cached_roll = 0;
static void scroll_thread(void);
static long scroll_stack[DEFAULT_STACK_SIZE/sizeof(long)];
#endif
static const char scroll_name[] = "remote_scroll";
static char scroll_ticks = 12; /* # of ticks between updates*/
static int scroll_delay = HZ/2; /* ticks delay before start */
static char scroll_step = 6; /* pixels per scroll step */
static int bidir_limit = 50; /* percent */
static struct scrollinfo scroll[SCROLLABLE_LINES];
#define LCD_REMOTE_CNTL_HIGHCOL 0x10 /* Upper column address */
#define LCD_REMOTE_CNTL_LOWCOL 0x00 /* Lower column address */
#define CS_LO GPIO1_OUT &= ~0x00000004 #define CS_LO GPIO1_OUT &= ~0x00000004
#define CS_HI GPIO1_OUT |= 0x00000004 #define CS_HI GPIO1_OUT |= 0x00000004
@ -100,6 +62,59 @@ static struct scrollinfo scroll[SCROLLABLE_LINES];
/* delay loop */ /* delay loop */
#define DELAY do { int _x; for(_x=0;_x<3;_x++);} while (0) #define DELAY do { int _x; for(_x=0;_x<3;_x++);} while (0)
#define SCROLLABLE_LINES 13
/*** globals ***/
unsigned char lcd_remote_framebuffer[LCD_REMOTE_HEIGHT/8][LCD_REMOTE_WIDTH]
#ifndef SIMULATOR
__attribute__ ((section(".idata")))
#endif
;
static int curfont = FONT_SYSFIXED;
static int xmargin = 0;
static int ymargin = 0;
#ifndef SIMULATOR
static int xoffset; /* needed for flip */
/* remote hotplug */
static int countdown; /* for remote plugging debounce */
static bool last_remote_status = false;
static bool init_remote = false; /* scroll thread should init lcd */
static bool remote_initialized = false;
/* cached settings values */
static bool cached_invert = false;
static bool cached_flip = false;
static int cached_contrast = 32;
static int cached_roll = 0;
#endif
/* All zeros and ones bitmaps for area filling */
static const unsigned char zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
static const unsigned char ones[8] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
};
/* scrolling */
static volatile int scrolling_lines=0; /* Bitpattern of which lines are scrolling */
static void scroll_thread(void);
static long scroll_stack[DEFAULT_STACK_SIZE/sizeof(long)];
static const char scroll_name[] = "remote_scroll";
static char scroll_ticks = 12; /* # of ticks between updates*/
static int scroll_delay = HZ/2; /* ticks delay before start */
static char scroll_step = 6; /* pixels per scroll step */
static int bidir_limit = 50; /* percent */
static struct scrollinfo scroll[SCROLLABLE_LINES];
static const char scroll_tick_table[16] = {
/* Hz values:
1, 1.25, 1.55, 2, 2.5, 3.12, 4, 5, 6.25, 8.33, 10, 12.5, 16.7, 20, 25, 33 */
100, 80, 64, 50, 40, 32, 25, 20, 16, 12, 10, 8, 6, 5, 4, 3
};
/*** driver routines ***/
#ifndef SIMULATOR #ifndef SIMULATOR
void lcd_remote_backlight_on(void) void lcd_remote_backlight_on(void)
{ {
@ -115,8 +130,8 @@ void lcd_remote_write_command(int cmd)
{ {
int i; int i;
CS_LO;
RS_LO; RS_LO;
CS_LO;
for (i = 0; i < 8; i++) for (i = 0; i < 8; i++)
{ {
@ -140,8 +155,8 @@ void lcd_remote_write_data(const unsigned char* p_bytes, int count)
int i, j; int i, j;
int data; int data;
CS_LO;
RS_HI; RS_HI;
CS_LO;
for (i = 0; i < count; i++) for (i = 0; i < count; i++)
{ {
@ -202,24 +217,16 @@ void lcd_remote_write_command_ex(int cmd, int data)
CS_HI; CS_HI;
} }
#endif /* !SIMULATOR */
#define LCD_REMOTE_CNTL_ADC_NORMAL 0xa0 /*** hardware configuration ***/
#define LCD_REMOTE_CNTL_ADC_REVERSE 0xa1
#define LCD_REMOTE_CNTL_SHL_NORMAL 0xc0
#define LCD_REMOTE_CNTL_SHL_REVERSE 0xc8
#define LCD_REMOTE_CNTL_DISPLAY_ON_OFF 0xae
#define LCD_REMOTE_CNTL_ENTIRE_ON_OFF 0xa4
#define LCD_REMOTE_CNTL_REVERSE_ON_OFF 0xa6
#define LCD_REMOTE_CNTL_NOP 0xe3
#define LCD_REMOTE_CNTL_POWER_CONTROL 0x2b
#define LCD_REMOTE_CNTL_SELECT_REGULATOR 0x20
#define LCD_REMOTE_CNTL_SELECT_BIAS 0xa2
#define LCD_REMOTE_CNTL_SELECT_VOLTAGE 0x81
#define LCD_REMOTE_CNTL_INIT_LINE 0x40
#define LCD_REMOTE_CNTL_SET_PAGE_ADDRESS 0xB0
#define LCD_REMOTE_CNTL_HIGHCOL 0x10 /* Upper column address */ int lcd_remote_default_contrast(void)
#define LCD_REMOTE_CNTL_LOWCOL 0x00 /* Lower column address */ {
return 32;
}
#ifndef SIMULATOR
void lcd_remote_powersave(bool on) void lcd_remote_powersave(bool on)
{ {
@ -268,161 +275,31 @@ void lcd_remote_set_flip(bool yesno)
} }
} }
int lcd_remote_default_contrast(void) /* Rolls up the lcd display by the specified amount of lines.
* Lines that are rolled out over the top of the screen are
* rolled in from the bottom again. This is a hardware
* remapping only and all operations on the lcd are affected.
* ->
* @param int lines - The number of lines that are rolled.
* The value must be 0 <= pixels < LCD_REMOTE_HEIGHT. */
void lcd_remote_roll(int lines)
{ {
return 32; char data[2];
}
#endif cached_roll = lines;
void lcd_remote_bitmap(const unsigned char *src, int x, int y, int nx, int ny, bool clear) __attribute__ ((section (".icode"))); if (remote_initialized)
void lcd_remote_bitmap(const unsigned char *src, int x, int y, int nx, int ny, bool clear)
{ {
const unsigned char *src_col; lines &= LCD_REMOTE_HEIGHT-1;
unsigned char *dst, *dst_col; data[0] = lines & 0xff;
unsigned int data, mask1, mask2, mask3, mask4; data[1] = lines >> 8;
int stride, shift;
if (((unsigned) x >= LCD_REMOTE_WIDTH) || ((unsigned) y >= LCD_REMOTE_HEIGHT)) lcd_remote_write_command(LCD_REMOTE_CNTL_INIT_LINE | 0x0); // init line
{ lcd_remote_write_data(data, 2);
return;
}
stride = nx; /* otherwise right-clipping will destroy the image */
if (((unsigned) (x + nx)) >= LCD_REMOTE_WIDTH)
{
nx = LCD_REMOTE_WIDTH - x;
}
if (((unsigned) (y + ny)) >= LCD_REMOTE_HEIGHT)
{
ny = LCD_REMOTE_HEIGHT - y;
}
dst = &lcd_remote_framebuffer[y >> 3][x];
shift = y & 7;
if (!shift && clear) /* shortcut for byte aligned match with clear */
{
while (ny >= 8) /* all full rows */
{
memcpy(dst, src, nx);
src += stride;
dst += LCD_REMOTE_WIDTH;
ny -= 8;
}
if (ny == 0) /* nothing left to do? */
{
return;
}
/* last partial row to do by default routine */
}
ny += shift;
/* Calculate bit masks */
mask4 = ~(0xfe << ((ny-1) & 7)); /* data mask for last partial row */
if (clear)
{
mask1 = ~(0xff << shift); /* clearing of first partial row */
mask2 = 0; /* clearing of intermediate (full) rows */
mask3 = ~mask4; /* clearing of last partial row */
if (ny <= 8)
{
mask3 |= mask1;
}
}
else
{
mask1 = mask2 = mask3 = 0xff;
}
/* Loop for each column */
for (x = 0; x < nx; x++)
{
src_col = src++;
dst_col = dst++;
data = 0;
y = 0;
if (ny > 8)
{
/* First partial row */
data = *src_col << shift;
*dst_col = (*dst_col & mask1) | data;
src_col += stride;
dst_col += LCD_REMOTE_WIDTH;
data >>= 8;
/* Intermediate rows */
for (y = 8; y < ny-8; y += 8)
{
data |= *src_col << shift;
*dst_col = (*dst_col & mask2) | data;
src_col += stride;
dst_col += LCD_REMOTE_WIDTH;
data >>= 8;
} }
} }
/* Last partial row */ /* The actual LCD init */
if (y + shift < ny)
{
data |= *src_col << shift;
}
*dst_col = (*dst_col & mask3) | (data & mask4);
}
}
void lcd_remote_drawrect(int x, int y, int nx, int ny)
{
int i;
if (x > LCD_REMOTE_WIDTH)
{
return;
}
if (y > LCD_REMOTE_HEIGHT)
{
return;
}
if (x + nx > LCD_REMOTE_WIDTH)
{
nx = LCD_REMOTE_WIDTH - x;
}
if (y + ny > LCD_REMOTE_HEIGHT)
{
ny = LCD_REMOTE_HEIGHT - y;
}
/* vertical lines */
for (i = 0; i < ny; i++)
{
REMOTE_DRAW_PIXEL(x, (y + i));
REMOTE_DRAW_PIXEL((x + nx - 1), (y + i));
}
/* horizontal lines */
for (i = 0; i < nx; i++)
{
REMOTE_DRAW_PIXEL((x + i),y);
REMOTE_DRAW_PIXEL((x + i),(y + ny - 1));
}
}
void lcd_remote_clear_display(void)
{
memset(lcd_remote_framebuffer, 0, sizeof lcd_remote_framebuffer);
}
#ifndef SIMULATOR
static void remote_lcd_init(void) static void remote_lcd_init(void)
{ {
lcd_remote_write_command(LCD_REMOTE_CNTL_SELECT_BIAS | 0x0); lcd_remote_write_command(LCD_REMOTE_CNTL_SELECT_BIAS | 0x0);
@ -451,6 +328,7 @@ static void remote_lcd_init(void)
lcd_remote_roll(cached_roll); lcd_remote_roll(cached_roll);
} }
/* Monitor remote hotswap */
static void remote_tick(void) static void remote_tick(void)
{ {
bool current_status; bool current_status;
@ -485,6 +363,7 @@ static void remote_tick(void)
} }
} }
/* Initialise ports and kick off monitor */
void lcd_remote_init(void) void lcd_remote_init(void)
{ {
GPIO_FUNCTION |= 0x10010800; /* GPIO11: Backlight GPIO_FUNCTION |= 0x10010800; /* GPIO11: Backlight
@ -503,11 +382,10 @@ void lcd_remote_init(void)
sizeof(scroll_stack), scroll_name); sizeof(scroll_stack), scroll_name);
} }
/*** update functions ***/
/* /* Update the display.
* Update the display. This must be called after all other LCD functions that change the display. */
* This must be called after all other LCD functions that change the display.
*/
void lcd_remote_update(void) __attribute__ ((section (".icode"))); void lcd_remote_update(void) __attribute__ ((section (".icode")));
void lcd_remote_update(void) void lcd_remote_update(void)
{ {
@ -526,12 +404,9 @@ void lcd_remote_update (void)
} }
} }
/* /* Update a fraction of the display. */
* Update a fraction of the display.
*/
void lcd_remote_update_rect(int, int, int, int) __attribute__ ((section (".icode"))); void lcd_remote_update_rect(int, int, int, int) __attribute__ ((section (".icode")));
void lcd_remote_update_rect (int x_start, int y, void lcd_remote_update_rect(int x_start, int y, int width, int height)
int width, int height)
{ {
int ymax; int ymax;
@ -560,35 +435,9 @@ void lcd_remote_update_rect (int x_start, int y,
lcd_remote_write_data(&lcd_remote_framebuffer[y][x_start], width); lcd_remote_write_data(&lcd_remote_framebuffer[y][x_start], width);
} }
} }
#endif /* !SIMULATOR */
/** /*** parameter handling ***/
* Rolls up the lcd display by the specified amount of lines.
* Lines that are rolled out over the top of the screen are
* rolled in from the bottom again. This is a hardware
* remapping only and all operations on the lcd are affected.
* ->
* @param int lines - The number of lines that are rolled.
* The value must be 0 <= pixels < LCD_REMOTE_HEIGHT.
*/
void lcd_remote_roll(int lines)
{
char data[2];
cached_roll = lines;
if (remote_initialized)
{
lines &= LCD_REMOTE_HEIGHT-1;
data[0] = lines & 0xff;
data[1] = lines >> 8;
lcd_remote_write_command(LCD_REMOTE_CNTL_INIT_LINE | 0x0); // init line
lcd_remote_write_data(data, 2);
}
}
#endif
void lcd_remote_setmargins(int x, int y) void lcd_remote_setmargins(int x, int y)
{ {
@ -617,143 +466,29 @@ int lcd_remote_getstringsize(const unsigned char *str, int *w, int *h)
return font_getstringsize(str, w, h, curfont); return font_getstringsize(str, w, h, curfont);
} }
/* put a string at a given char position */ /*** drawing functions ***/
void lcd_remote_puts(int x, int y, const unsigned char *str)
void lcd_remote_clear_display(void)
{ {
lcd_remote_puts_style(x, y, str, STYLE_DEFAULT); memset(lcd_remote_framebuffer, 0, sizeof lcd_remote_framebuffer);
} }
void lcd_remote_puts_style(int x, int y, const unsigned char *str, int style) /* Set a single pixel */
void lcd_remote_drawpixel(int x, int y)
{ {
int xpos,ypos,w,h; REMOTE_DRAW_PIXEL(x,y);
/* make sure scrolling is turned off on the line we are updating */
//scrolling_lines &= ~(1 << y);
if(!str || !str[0])
return;
lcd_remote_getstringsize(str, &w, &h);
xpos = xmargin + x*w / strlen(str);
ypos = ymargin + y*h;
lcd_remote_putsxy(xpos, ypos, str);
lcd_remote_clearrect(xpos + w, ypos, LCD_REMOTE_WIDTH - (xpos + w), h);
if (style & STYLE_INVERT)
lcd_remote_invertrect(xpos, ypos, LCD_REMOTE_WIDTH - xpos, h);
} }
/* put a string at a given pixel position, skipping first ofs pixel columns */ /* Clear a single pixel */
static void lcd_remote_putsxyofs(int x, int y, int ofs, const unsigned char *str) void lcd_remote_clearpixel(int x, int y)
{ {
int ch; REMOTE_CLEAR_PIXEL(x,y);
struct font* pf = font_get(curfont);
while ((ch = *str++) != '\0' && x < LCD_REMOTE_WIDTH)
{
int gwidth, width;
/* check input range */
if (ch < pf->firstchar || ch >= pf->firstchar+pf->size)
ch = pf->defaultchar;
ch -= pf->firstchar;
/* get proportional width and glyph bits */
gwidth = pf->width ? pf->width[ch] : pf->maxwidth;
width = MIN (gwidth, LCD_REMOTE_WIDTH - x);
if (ofs != 0)
{
if (ofs > width)
{
ofs -= width;
continue;
}
width -= ofs;
} }
if (width > 0) /* Invert a single pixel */
void lcd_remote_invertpixel(int x, int y)
{ {
unsigned int i; REMOTE_INVERT_PIXEL(x,y);
const unsigned char* bits = pf->bits +
(pf->offset ? pf->offset[ch]
: ((pf->height + 7) / 8 * pf->maxwidth * ch));
if (ofs != 0)
{
for (i = 0; i < pf->height; i += 8)
{
lcd_remote_bitmap (bits + ofs, x, y + i, width,
MIN(8, pf->height - i), true);
bits += gwidth;
}
}
else
lcd_remote_bitmap ((unsigned char*) bits, x, y, gwidth,
pf->height, true);
x += width;
}
ofs = 0;
}
}
/* put a string at a given pixel position */
void lcd_remote_putsxy(int x, int y, const unsigned char *str)
{
lcd_remote_putsxyofs(x, y, 0, str);
}
/*
* Clear a rectangular area at (x, y), size (nx, ny)
*/
void lcd_remote_clearrect (int x, int y, int nx, int ny)
{
int i;
for (i = 0; i < nx; i++)
lcd_remote_bitmap (zeros, x+i, y, 1, ny, true);
}
/*
* Fill a rectangular area at (x, y), size (nx, ny)
*/
void lcd_remote_fillrect (int x, int y, int nx, int ny)
{
int i;
for (i = 0; i < nx; i++)
lcd_remote_bitmap (ones, x+i, y, 1, ny, true);
}
/* Invert a rectangular area at (x, y), size (nx, ny) */
void lcd_remote_invertrect (int x, int y, int nx, int ny)
{
int i, j;
if (x > LCD_REMOTE_WIDTH)
return;
if (y > LCD_REMOTE_HEIGHT)
return;
if (x + nx > LCD_REMOTE_WIDTH)
nx = LCD_REMOTE_WIDTH - x;
if (y + ny > LCD_REMOTE_HEIGHT)
ny = LCD_REMOTE_HEIGHT - y;
for (i = 0; i < nx; i++)
for (j = 0; j < ny; j++)
REMOTE_INVERT_PIXEL((x + i), (y + j));
}
/* Reverse the invert setting of the scrolling line (if any) at given char
position. Setting will go into affect next time line scrolls. */
void lcd_remote_invertscroll(int x, int y)
{
struct scrollinfo* s;
(void)x;
s = &scroll[y];
s->invert = !s->invert;
} }
void lcd_remote_drawline(int x1, int y1, int x2, int y2) void lcd_remote_drawline(int x1, int y1, int x2, int y2)
@ -896,28 +631,310 @@ void lcd_remote_clearline( int x1, int y1, int x2, int y2 )
} }
} }
/* void lcd_remote_drawrect(int x, int y, int nx, int ny)
* Set a single pixel
*/
void lcd_remote_drawpixel(int x, int y)
{ {
REMOTE_DRAW_PIXEL(x,y); int i;
if (x > LCD_REMOTE_WIDTH)
{
return;
} }
/* if (y > LCD_REMOTE_HEIGHT)
* Clear a single pixel
*/
void lcd_remote_clearpixel(int x, int y)
{ {
REMOTE_CLEAR_PIXEL(x,y); return;
} }
/* if (x + nx > LCD_REMOTE_WIDTH)
* Invert a single pixel
*/
void lcd_remote_invertpixel(int x, int y)
{ {
REMOTE_INVERT_PIXEL(x,y); nx = LCD_REMOTE_WIDTH - x;
}
if (y + ny > LCD_REMOTE_HEIGHT)
{
ny = LCD_REMOTE_HEIGHT - y;
}
/* vertical lines */
for (i = 0; i < ny; i++)
{
REMOTE_DRAW_PIXEL(x, (y + i));
REMOTE_DRAW_PIXEL((x + nx - 1), (y + i));
}
/* horizontal lines */
for (i = 0; i < nx; i++)
{
REMOTE_DRAW_PIXEL((x + i),y);
REMOTE_DRAW_PIXEL((x + i),(y + ny - 1));
}
}
/* Clear a rectangular area at (x, y), size (nx, ny) */
void lcd_remote_clearrect(int x, int y, int nx, int ny)
{
int i;
for (i = 0; i < nx; i++)
lcd_remote_bitmap(zeros, x+i, y, 1, ny, true);
}
/* Fill a rectangular area at (x, y), size (nx, ny) */
void lcd_remote_fillrect(int x, int y, int nx, int ny)
{
int i;
for (i = 0; i < nx; i++)
lcd_remote_bitmap(ones, x+i, y, 1, ny, true);
}
/* Invert a rectangular area at (x, y), size (nx, ny) */
void lcd_remote_invertrect(int x, int y, int nx, int ny)
{
int i, j;
if (x > LCD_REMOTE_WIDTH)
return;
if (y > LCD_REMOTE_HEIGHT)
return;
if (x + nx > LCD_REMOTE_WIDTH)
nx = LCD_REMOTE_WIDTH - x;
if (y + ny > LCD_REMOTE_HEIGHT)
ny = LCD_REMOTE_HEIGHT - y;
for (i = 0; i < nx; i++)
for (j = 0; j < ny; j++)
REMOTE_INVERT_PIXEL((x + i), (y + j));
}
void lcd_remote_bitmap(const unsigned char *src, int x, int y, int nx, int ny,
bool clear) __attribute__ ((section (".icode")));
void lcd_remote_bitmap(const unsigned char *src, int x, int y, int nx, int ny,
bool clear)
{
const unsigned char *src_col;
unsigned char *dst, *dst_col;
unsigned int data, mask1, mask2, mask3, mask4;
int stride, shift;
if (((unsigned) x >= LCD_REMOTE_WIDTH) || ((unsigned) y >= LCD_REMOTE_HEIGHT))
{
return;
}
stride = nx; /* otherwise right-clipping will destroy the image */
if (((unsigned) (x + nx)) >= LCD_REMOTE_WIDTH)
{
nx = LCD_REMOTE_WIDTH - x;
}
if (((unsigned) (y + ny)) >= LCD_REMOTE_HEIGHT)
{
ny = LCD_REMOTE_HEIGHT - y;
}
dst = &lcd_remote_framebuffer[y >> 3][x];
shift = y & 7;
if (!shift && clear) /* shortcut for byte aligned match with clear */
{
while (ny >= 8) /* all full rows */
{
memcpy(dst, src, nx);
src += stride;
dst += LCD_REMOTE_WIDTH;
ny -= 8;
}
if (ny == 0) /* nothing left to do? */
{
return;
}
/* last partial row to do by default routine */
}
ny += shift;
/* Calculate bit masks */
mask4 = ~(0xfe << ((ny-1) & 7)); /* data mask for last partial row */
if (clear)
{
mask1 = ~(0xff << shift); /* clearing of first partial row */
mask2 = 0; /* clearing of intermediate (full) rows */
mask3 = ~mask4; /* clearing of last partial row */
if (ny <= 8)
{
mask3 |= mask1;
}
}
else
{
mask1 = mask2 = mask3 = 0xff;
}
/* Loop for each column */
for (x = 0; x < nx; x++)
{
src_col = src++;
dst_col = dst++;
data = 0;
y = 0;
if (ny > 8)
{
/* First partial row */
data = *src_col << shift;
*dst_col = (*dst_col & mask1) | data;
src_col += stride;
dst_col += LCD_REMOTE_WIDTH;
data >>= 8;
/* Intermediate rows */
for (y = 8; y < ny-8; y += 8)
{
data |= *src_col << shift;
*dst_col = (*dst_col & mask2) | data;
src_col += stride;
dst_col += LCD_REMOTE_WIDTH;
data >>= 8;
}
}
/* Last partial row */
if (y + shift < ny)
{
data |= *src_col << shift;
}
*dst_col = (*dst_col & mask3) | (data & mask4);
}
}
/* put a string at a given pixel position, skipping first ofs pixel columns */
static void lcd_remote_putsxyofs(int x, int y, int ofs, const unsigned char *str)
{
int ch;
struct font* pf = font_get(curfont);
while ((ch = *str++) != '\0' && x < LCD_REMOTE_WIDTH)
{
int gwidth, width;
/* check input range */
if (ch < pf->firstchar || ch >= pf->firstchar+pf->size)
ch = pf->defaultchar;
ch -= pf->firstchar;
/* get proportional width and glyph bits */
gwidth = pf->width ? pf->width[ch] : pf->maxwidth;
width = MIN (gwidth, LCD_REMOTE_WIDTH - x);
if (ofs != 0)
{
if (ofs > width)
{
ofs -= width;
continue;
}
width -= ofs;
}
if (width > 0)
{
unsigned int i;
const unsigned char* bits = pf->bits +
(pf->offset ? pf->offset[ch]
: ((pf->height + 7) / 8 * pf->maxwidth * ch));
if (ofs != 0)
{
for (i = 0; i < pf->height; i += 8)
{
lcd_remote_bitmap (bits + ofs, x, y + i, width,
MIN(8, pf->height - i), true);
bits += gwidth;
}
}
else
lcd_remote_bitmap ((unsigned char*) bits, x, y, gwidth,
pf->height, true);
x += width;
}
ofs = 0;
}
}
/* put a string at a given pixel position */
void lcd_remote_putsxy(int x, int y, const unsigned char *str)
{
lcd_remote_putsxyofs(x, y, 0, str);
}
/*** line oriented text output ***/
/* put a string at a given char position */
void lcd_remote_puts(int x, int y, const unsigned char *str)
{
lcd_remote_puts_style(x, y, str, STYLE_DEFAULT);
}
void lcd_remote_puts_style(int x, int y, const unsigned char *str, int style)
{
int xpos,ypos,w,h;
/* make sure scrolling is turned off on the line we are updating */
//scrolling_lines &= ~(1 << y);
if(!str || !str[0])
return;
lcd_remote_getstringsize(str, &w, &h);
xpos = xmargin + x*w / strlen(str);
ypos = ymargin + y*h;
lcd_remote_putsxy(xpos, ypos, str);
lcd_remote_clearrect(xpos + w, ypos, LCD_REMOTE_WIDTH - (xpos + w), h);
if (style & STYLE_INVERT)
lcd_remote_invertrect(xpos, ypos, LCD_REMOTE_WIDTH - xpos, h);
}
/*** scrolling ***/
/* Reverse the invert setting of the scrolling line (if any) at given char
position. Setting will go into affect next time line scrolls. */
void lcd_remote_invertscroll(int x, int y)
{
struct scrollinfo* s;
(void)x;
s = &scroll[y];
s->invert = !s->invert;
}
void lcd_remote_stop_scroll(void)
{
scrolling_lines=0;
}
void lcd_remote_scroll_speed(int speed)
{
scroll_ticks = scroll_tick_table[speed];
}
void lcd_remote_scroll_step(int step)
{
scroll_step = step;
}
void lcd_remote_scroll_delay(int ms)
{
scroll_delay = ms / (HZ / 10);
}
void lcd_remote_bidir_scroll(int percent)
{
bidir_limit = percent;
} }
void lcd_remote_puts_scroll(int x, int y, const unsigned char *string) void lcd_remote_puts_scroll(int x, int y, const unsigned char *string)
@ -982,37 +999,6 @@ void lcd_remote_puts_scroll_style(int x, int y, const unsigned char *string, int
scrolling_lines &= ~(1<<y); scrolling_lines &= ~(1<<y);
} }
void lcd_remote_stop_scroll(void)
{
scrolling_lines=0;
}
static const char scroll_tick_table[16] = {
/* Hz values:
1, 1.25, 1.55, 2, 2.5, 3.12, 4, 5, 6.25, 8.33, 10, 12.5, 16.7, 20, 25, 33 */
100, 80, 64, 50, 40, 32, 25, 20, 16, 12, 10, 8, 6, 5, 4, 3
};
void lcd_remote_scroll_speed(int speed)
{
scroll_ticks = scroll_tick_table[speed];
}
void lcd_remote_scroll_step(int step)
{
scroll_step = step;
}
void lcd_remote_scroll_delay(int ms)
{
scroll_delay = ms / (HZ / 10);
}
void lcd_remote_bidir_scroll(int percent)
{
bidir_limit = percent;
}
#ifndef SIMULATOR #ifndef SIMULATOR
static void scroll_thread(void) static void scroll_thread(void)
{ {

814
firmware/drivers/lcd-h100.c
View file

@ -18,8 +18,6 @@
****************************************************************************/ ****************************************************************************/
#include "config.h" #include "config.h"
#ifdef HAVE_LCD_BITMAP
#include "cpu.h" #include "cpu.h"
#include "lcd.h" #include "lcd.h"
#include "kernel.h" #include "kernel.h"
@ -58,38 +56,9 @@
#define LCD_CNTL_COLUMN 0x13 #define LCD_CNTL_COLUMN 0x13
#define LCD_CNTL_DATA_WRITE 0x1d #define LCD_CNTL_DATA_WRITE 0x1d
#define SCROLL_SPACING 3
#define SCROLLABLE_LINES 26 #define SCROLLABLE_LINES 26
struct scrollinfo { /*** globals ***/
char line[MAX_PATH + LCD_WIDTH/2 + SCROLL_SPACING + 2];
int len; /* length of line in chars */
int width; /* length of line in pixels */
int offset;
int startx;
bool backward; /* scroll presently forward or backward? */
bool bidir;
bool invert; /* invert the scrolled text */
long start_tick;
};
static volatile int scrolling_lines=0; /* Bitpattern of which lines are scrolling */
static void scroll_thread(void);
static long scroll_stack[DEFAULT_STACK_SIZE/sizeof(long)];
static const char scroll_name[] = "scroll";
static char scroll_ticks = 12; /* # of ticks between updates*/
static int scroll_delay = HZ/2; /* ticks delay before start */
static char scroll_step = 6; /* pixels per scroll step */
static int bidir_limit = 50; /* percent */
static struct scrollinfo scroll[SCROLLABLE_LINES];
static int xmargin = 0;
static int ymargin = 0;
static int curfont = FONT_SYSFIXED;
#ifndef SIMULATOR
static int xoffset = 0; /* needed for flip */
#endif
unsigned char lcd_framebuffer[LCD_HEIGHT/8][LCD_WIDTH] unsigned char lcd_framebuffer[LCD_HEIGHT/8][LCD_WIDTH]
#ifndef SIMULATOR #ifndef SIMULATOR
@ -97,6 +66,13 @@ unsigned char lcd_framebuffer[LCD_HEIGHT/8][LCD_WIDTH]
#endif #endif
; ;
static int xmargin = 0;
static int ymargin = 0;
static int curfont = FONT_SYSFIXED;
#ifndef SIMULATOR
static int xoffset = 0; /* needed for flip */
#endif
/* All zeros and ones bitmaps for area filling */ /* All zeros and ones bitmaps for area filling */
static const unsigned char zeros[16] = { static const unsigned char zeros[16] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
@ -106,11 +82,85 @@ static const unsigned char ones[16] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
}; };
/* scrolling */
static volatile int scrolling_lines=0; /* Bitpattern of which lines are scrolling */
static void scroll_thread(void);
static long scroll_stack[DEFAULT_STACK_SIZE/sizeof(long)];
static const char scroll_name[] = "scroll";
static char scroll_ticks = 12; /* # of ticks between updates*/
static int scroll_delay = HZ/2; /* ticks delay before start */
static char scroll_step = 6; /* pixels per scroll step */
static int bidir_limit = 50; /* percent */
static struct scrollinfo scroll[SCROLLABLE_LINES];
static const char scroll_tick_table[16] = {
/* Hz values:
1, 1.25, 1.55, 2, 2.5, 3.12, 4, 5, 6.25, 8.33, 10, 12.5, 16.7, 20, 25, 33 */
100, 80, 64, 50, 40, 32, 25, 20, 16, 12, 10, 8, 6, 5, 4, 3
};
/*** driver code is in lcd.S ***/
/*** hardware configuration ***/
int lcd_default_contrast(void) int lcd_default_contrast(void)
{ {
return 28; return 28;
} }
#ifndef SIMULATOR
void lcd_set_contrast(int val)
{
lcd_write_command_ex(LCD_CNTL_ELECTRONIC_VOLUME, val, -1);
}
void lcd_set_invert_display(bool yesno)
{
lcd_write_command(LCD_CNTL_REVERSE | (yesno?1:0));
}
/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
if (yesno)
{
lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 1);
lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 0);
lcd_write_command_ex(LCD_CNTL_DUTY_SET, 0x20, 0);
xoffset = 160 - LCD_WIDTH; /* 160 colums minus the 160 we have */
}
else
{
lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 0);
lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 1);
lcd_write_command_ex(LCD_CNTL_DUTY_SET, 0x20, 1);
xoffset = 0;
}
}
/* Rolls up the lcd display by the specified amount of lines.
* Lines that are rolled out over the top of the screen are
* rolled in from the bottom again. This is a hardware
* remapping only and all operations on the lcd are affected.
* ->
* @param int lines - The number of lines that are rolled.
* The value must be 0 <= pixels < LCD_HEIGHT. */
void lcd_roll(int lines)
{
char data[2];
lines &= LCD_HEIGHT-1;
data[0] = lines & 0xff;
data[1] = lines >> 8;
lcd_write_command(LCD_CNTL_DISPLAY_START_LINE);
lcd_write_data(data, 2);
}
#endif /* !SIMULATOR */
/* LCD init */
#ifdef SIMULATOR #ifdef SIMULATOR
void lcd_init(void) void lcd_init(void)
@ -118,12 +168,8 @@ void lcd_init(void)
create_thread(scroll_thread, scroll_stack, create_thread(scroll_thread, scroll_stack,
sizeof(scroll_stack), scroll_name); sizeof(scroll_stack), scroll_name);
} }
#else #else
/*
* Initialize LCD
*/
void lcd_init(void) void lcd_init(void)
{ {
/* GPO35 is the LCD A0 pin /* GPO35 is the LCD A0 pin
@ -170,6 +216,7 @@ void lcd_init (void)
sizeof(scroll_stack), scroll_name); sizeof(scroll_stack), scroll_name);
} }
/*** update functions ***/
/* Performance function that works with an external buffer /* Performance function that works with an external buffer
note that y and height are in 8-pixel units! */ note that y and height are in 8-pixel units! */
@ -189,10 +236,8 @@ void lcd_blit (const unsigned char* p_data, int x, int y, int width,
} }
/* /* Update the display.
* Update the display. This must be called after all other LCD functions that change the display. */
* This must be called after all other LCD functions that change the display.
*/
void lcd_update(void) __attribute__ ((section (".icode"))); void lcd_update(void) __attribute__ ((section (".icode")));
void lcd_update(void) void lcd_update(void)
{ {
@ -209,12 +254,9 @@ void lcd_update (void)
} }
} }
/* /* Update a fraction of the display. */
* Update a fraction of the display.
*/
void lcd_update_rect(int, int, int, int) __attribute__ ((section (".icode"))); void lcd_update_rect(int, int, int, int) __attribute__ ((section (".icode")));
void lcd_update_rect (int x_start, int y, void lcd_update_rect(int x_start, int y, int width, int height)
int width, int height)
{ {
int ymax; int ymax;
@ -239,64 +281,9 @@ void lcd_update_rect (int x_start, int y,
lcd_write_data (&lcd_framebuffer[y][x_start], width); lcd_write_data (&lcd_framebuffer[y][x_start], width);
} }
} }
#endif /* !SIMULATOR */
void lcd_set_contrast(int val) /*** parameter handling ***/
{
lcd_write_command_ex(LCD_CNTL_ELECTRONIC_VOLUME, val, -1);
}
void lcd_set_invert_display(bool yesno)
{
lcd_write_command(LCD_CNTL_REVERSE | (yesno?1:0));
}
/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
if (yesno)
{
lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 1);
lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 0);
lcd_write_command_ex(LCD_CNTL_DUTY_SET, 0x20, 0);
xoffset = 160 - LCD_WIDTH; /* 160 colums minus the 160 we have */
}
else
{
lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 0);
lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 1);
lcd_write_command_ex(LCD_CNTL_DUTY_SET, 0x20, 1);
xoffset = 0;
}
}
/**
* Rolls up the lcd display by the specified amount of lines.
* Lines that are rolled out over the top of the screen are
* rolled in from the bottom again. This is a hardware
* remapping only and all operations on the lcd are affected.
* ->
* @param int lines - The number of lines that are rolled.
* The value must be 0 <= pixels < LCD_HEIGHT.
*/
void lcd_roll(int lines)
{
char data[2];
lines &= LCD_HEIGHT-1;
data[0] = lines & 0xff;
data[1] = lines >> 8;
lcd_write_command(LCD_CNTL_DISPLAY_START_LINE);
lcd_write_data(data, 2);
}
#endif /* SIMULATOR */
void lcd_clear_display (void)
{
memset (lcd_framebuffer, 0, sizeof lcd_framebuffer);
scrolling_lines = 0;
}
void lcd_setmargins(int x, int y) void lcd_setmargins(int x, int y)
{ {
@ -324,294 +311,30 @@ int lcd_getstringsize(const unsigned char *str, int *w, int *h)
return font_getstringsize(str, w, h, curfont); return font_getstringsize(str, w, h, curfont);
} }
/* put a string at a given char position */ /*** drawing functions ***/
void lcd_puts(int x, int y, const unsigned char *str)
void lcd_clear_display(void)
{ {
lcd_puts_style(x, y, str, STYLE_DEFAULT); memset (lcd_framebuffer, 0, sizeof lcd_framebuffer);
scrolling_lines = 0;
} }
void lcd_puts_style(int x, int y, const unsigned char *str, int style) /* Set a single pixel */
void lcd_drawpixel(int x, int y)
{ {
int xpos,ypos,w,h; DRAW_PIXEL(x,y);
#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
/* We make the simulator truncate the string if it reaches the right edge,
as otherwise it'll wrap. The real target doesn't wrap. */
char buffer[12];
if(strlen(str)+x > 11 ) {
strncpy(buffer, str, sizeof buffer);
buffer[11-x]=0;
str = buffer;
}
xmargin = 0;
ymargin = 8;
#endif
/* make sure scrolling is turned off on the line we are updating */
scrolling_lines &= ~(1 << y);
if(!str || !str[0])
return;
lcd_getstringsize(str, &w, &h);
xpos = xmargin + x*w / strlen(str);
ypos = ymargin + y*h;
lcd_putsxy(xpos, ypos, str);
lcd_clearrect(xpos + w, ypos, LCD_WIDTH - (xpos + w), h);
if (style & STYLE_INVERT)
lcd_invertrect(xpos, ypos, LCD_WIDTH - xpos, h);
#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
lcd_update();
#endif
} }
/* put a string at a given pixel position, skipping first ofs pixel columns */ /* Clear a single pixel */
static void lcd_putsxyofs(int x, int y, int ofs, const unsigned char *str) void lcd_clearpixel(int x, int y)
{ {
int ch; CLEAR_PIXEL(x,y);
struct font* pf = font_get(curfont); }
while ((ch = *str++) != '\0' && x < LCD_WIDTH) /* Invert a single pixel */
void lcd_invertpixel(int x, int y)
{ {
int gwidth, width; INVERT_PIXEL(x,y);
/* check input range */
if (ch < pf->firstchar || ch >= pf->firstchar+pf->size)
ch = pf->defaultchar;
ch -= pf->firstchar;
/* get proportional width and glyph bits */
gwidth = pf->width ? pf->width[ch] : pf->maxwidth;
width = MIN (gwidth, LCD_WIDTH - x);
if (ofs != 0)
{
if (ofs > width)
{
ofs -= width;
continue;
}
width -= ofs;
}
if (width > 0)
{
unsigned int i;
const unsigned char* bits = pf->bits +
(pf->offset ? pf->offset[ch]
: ((pf->height + 7) / 8 * pf->maxwidth * ch));
if (ofs != 0)
{
for (i = 0; i < pf->height; i += 8)
{
lcd_bitmap (bits + ofs, x, y + i, width,
MIN(8, pf->height - i), true);
bits += gwidth;
}
}
else
lcd_bitmap ((unsigned char*) bits, x, y, gwidth,
pf->height, true);
x += width;
}
ofs = 0;
}
}
/* put a string at a given pixel position */
void lcd_putsxy(int x, int y, const unsigned char *str)
{
lcd_putsxyofs(x, y, 0, str);
}
/*
* About Rockbox' internal bitmap format:
*
* A bitmap contains one bit for every pixel that defines if that pixel is
* black (1) or white (0). Bits within a byte are arranged vertically, LSB
* at top.
* The bytes are stored in row-major order, with byte 0 being top left,
* byte 1 2nd from left etc. The first row of bytes defines pixel rows
* 0..7, the second row defines pixel row 8..15 etc.
*
* This is the same as the internal lcd hw format.
*/
/*
* Draw a bitmap at (x, y), size (nx, ny)
* if 'clear' is true, clear destination area first
*/
void lcd_bitmap (const unsigned char *src, int x, int y, int nx, int ny,
bool clear) __attribute__ ((section (".icode")));
void lcd_bitmap (const unsigned char *src, int x, int y, int nx, int ny,
bool clear)
{
const unsigned char *src_col;
unsigned char *dst, *dst_col;
unsigned int data, mask1, mask2, mask3, mask4;
int stride, shift;
if (((unsigned) x >= LCD_WIDTH) || ((unsigned) y >= LCD_HEIGHT))
return;
stride = nx; /* otherwise right-clipping will destroy the image */
if (((unsigned) (x + nx)) >= LCD_WIDTH)
nx = LCD_WIDTH - x;
if (((unsigned) (y + ny)) >= LCD_HEIGHT)
ny = LCD_HEIGHT - y;
dst = &lcd_framebuffer[y >> 3][x];
shift = y & 7;
if (!shift && clear) /* shortcut for byte aligned match with clear */
{
while (ny >= 8) /* all full rows */
{
memcpy(dst, src, nx);
src += stride;
dst += LCD_WIDTH;
ny -= 8;
}
if (ny == 0) /* nothing left to do? */
return;
/* last partial row to do by default routine */
}
ny += shift;
/* Calculate bit masks */
mask4 = ~(0xfe << ((ny-1) & 7)); /* data mask for last partial row */
if (clear)
{
mask1 = ~(0xff << shift); /* clearing of first partial row */
mask2 = 0; /* clearing of intermediate (full) rows */
mask3 = ~mask4; /* clearing of last partial row */
if (ny <= 8)
mask3 |= mask1;
}
else
mask1 = mask2 = mask3 = 0xff;
/* Loop for each column */
for (x = 0; x < nx; x++)
{
src_col = src++;
dst_col = dst++;
data = 0;
y = 0;
if (ny > 8)
{
/* First partial row */
data = *src_col << shift;
*dst_col = (*dst_col & mask1) | data;
src_col += stride;
dst_col += LCD_WIDTH;
data >>= 8;
/* Intermediate rows */
for (y = 8; y < ny-8; y += 8)
{
data |= *src_col << shift;
*dst_col = (*dst_col & mask2) | data;
src_col += stride;
dst_col += LCD_WIDTH;
data >>= 8;
}
}
/* Last partial row */
if (y + shift < ny)
data |= *src_col << shift;
*dst_col = (*dst_col & mask3) | (data & mask4);
}
}
/*
* Draw a rectangle with upper left corner at (x, y)
* and size (nx, ny)
*/
void lcd_drawrect (int x, int y, int nx, int ny)
{
int i;
if (x > LCD_WIDTH)
return;
if (y > LCD_HEIGHT)
return;
if (x + nx > LCD_WIDTH)
nx = LCD_WIDTH - x;
if (y + ny > LCD_HEIGHT)
ny = LCD_HEIGHT - y;
/* vertical lines */
for (i = 0; i < ny; i++) {
DRAW_PIXEL(x, (y + i));
DRAW_PIXEL((x + nx - 1), (y + i));
}
/* horizontal lines */
for (i = 0; i < nx; i++) {
DRAW_PIXEL((x + i),y);
DRAW_PIXEL((x + i),(y + ny - 1));
}
}
/*
* Clear a rectangular area at (x, y), size (nx, ny)
*/
void lcd_clearrect (int x, int y, int nx, int ny)
{
int i;
for (i = 0; i < nx; i++)
lcd_bitmap (zeros, x+i, y, 1, ny, true);
}
/*
* Fill a rectangular area at (x, y), size (nx, ny)
*/
void lcd_fillrect (int x, int y, int nx, int ny)
{
int i;
for (i = 0; i < nx; i++)
lcd_bitmap (ones, x+i, y, 1, ny, true);
}
/* Invert a rectangular area at (x, y), size (nx, ny) */
void lcd_invertrect (int x, int y, int nx, int ny)
{
int i, j;
if (x > LCD_WIDTH)
return;
if (y > LCD_HEIGHT)
return;
if (x + nx > LCD_WIDTH)
nx = LCD_WIDTH - x;
if (y + ny > LCD_HEIGHT)
ny = LCD_HEIGHT - y;
for (i = 0; i < nx; i++)
for (j = 0; j < ny; j++)
INVERT_PIXEL((x + i), (y + j));
}
/* Reverse the invert setting of the scrolling line (if any) at given char
position. Setting will go into affect next time line scrolls. */
void lcd_invertscroll(int x, int y)
{
struct scrollinfo* s;
(void)x;
s = &scroll[y];
s->invert = !s->invert;
} }
void lcd_drawline(int x1, int y1, int x2, int y2) void lcd_drawline(int x1, int y1, int x2, int y2)
@ -754,28 +477,294 @@ void lcd_clearline( int x1, int y1, int x2, int y2 )
} }
} }
/* /* Draw a rectangle with upper left corner at (x, y) and size (nx, ny) */
* Set a single pixel void lcd_drawrect(int x, int y, int nx, int ny)
*/
void lcd_drawpixel(int x, int y)
{ {
DRAW_PIXEL(x,y); int i;
if (x > LCD_WIDTH)
return;
if (y > LCD_HEIGHT)
return;
if (x + nx > LCD_WIDTH)
nx = LCD_WIDTH - x;
if (y + ny > LCD_HEIGHT)
ny = LCD_HEIGHT - y;
/* vertical lines */
for (i = 0; i < ny; i++) {
DRAW_PIXEL(x, (y + i));
DRAW_PIXEL((x + nx - 1), (y + i));
} }
/* /* horizontal lines */
* Clear a single pixel for (i = 0; i < nx; i++) {
*/ DRAW_PIXEL((x + i),y);
void lcd_clearpixel(int x, int y) DRAW_PIXEL((x + i),(y + ny - 1));
{ }
CLEAR_PIXEL(x,y);
} }
/* /* Clear a rectangular area at (x, y), size (nx, ny) */
* Invert a single pixel void lcd_clearrect(int x, int y, int nx, int ny)
*/
void lcd_invertpixel(int x, int y)
{ {
INVERT_PIXEL(x,y); int i;
for (i = 0; i < nx; i++)
lcd_bitmap (zeros, x+i, y, 1, ny, true);
}
/* Fill a rectangular area at (x, y), size (nx, ny) */
void lcd_fillrect(int x, int y, int nx, int ny)
{
int i;
for (i = 0; i < nx; i++)
lcd_bitmap (ones, x+i, y, 1, ny, true);
}
/* Invert a rectangular area at (x, y), size (nx, ny) */
void lcd_invertrect(int x, int y, int nx, int ny)
{
int i, j;
if (x > LCD_WIDTH)
return;
if (y > LCD_HEIGHT)
return;
if (x + nx > LCD_WIDTH)
nx = LCD_WIDTH - x;
if (y + ny > LCD_HEIGHT)
ny = LCD_HEIGHT - y;
for (i = 0; i < nx; i++)
for (j = 0; j < ny; j++)
INVERT_PIXEL((x + i), (y + j));
}
/* About Rockbox' internal bitmap format:
*
* A bitmap contains one bit for every pixel that defines if that pixel is
* black (1) or white (0). Bits within a byte are arranged vertically, LSB
* at top.
* The bytes are stored in row-major order, with byte 0 being top left,
* byte 1 2nd from left etc. The first row of bytes defines pixel rows
* 0..7, the second row defines pixel row 8..15 etc.
*
* This is the same as the internal lcd hw format. */
/* Draw a bitmap at (x, y), size (nx, ny)
if 'clear' is true, clear destination area first */
void lcd_bitmap(const unsigned char *src, int x, int y, int nx, int ny,
bool clear) __attribute__ ((section (".icode")));
void lcd_bitmap(const unsigned char *src, int x, int y, int nx, int ny,
bool clear)
{
const unsigned char *src_col;
unsigned char *dst, *dst_col;
unsigned int data, mask1, mask2, mask3, mask4;
int stride, shift;
if (((unsigned) x >= LCD_WIDTH) || ((unsigned) y >= LCD_HEIGHT))
return;
stride = nx; /* otherwise right-clipping will destroy the image */
if (((unsigned) (x + nx)) >= LCD_WIDTH)
nx = LCD_WIDTH - x;
if (((unsigned) (y + ny)) >= LCD_HEIGHT)
ny = LCD_HEIGHT - y;
dst = &lcd_framebuffer[y >> 3][x];
shift = y & 7;
if (!shift && clear) /* shortcut for byte aligned match with clear */
{
while (ny >= 8) /* all full rows */
{
memcpy(dst, src, nx);
src += stride;
dst += LCD_WIDTH;
ny -= 8;
}
if (ny == 0) /* nothing left to do? */
return;
/* last partial row to do by default routine */
}
ny += shift;
/* Calculate bit masks */
mask4 = ~(0xfe << ((ny-1) & 7)); /* data mask for last partial row */
if (clear)
{
mask1 = ~(0xff << shift); /* clearing of first partial row */
mask2 = 0; /* clearing of intermediate (full) rows */
mask3 = ~mask4; /* clearing of last partial row */
if (ny <= 8)
mask3 |= mask1;
}
else
mask1 = mask2 = mask3 = 0xff;
/* Loop for each column */
for (x = 0; x < nx; x++)
{
src_col = src++;
dst_col = dst++;
data = 0;
y = 0;
if (ny > 8)
{
/* First partial row */
data = *src_col << shift;
*dst_col = (*dst_col & mask1) | data;
src_col += stride;
dst_col += LCD_WIDTH;
data >>= 8;
/* Intermediate rows */
for (y = 8; y < ny-8; y += 8)
{
data |= *src_col << shift;
*dst_col = (*dst_col & mask2) | data;
src_col += stride;
dst_col += LCD_WIDTH;
data >>= 8;
}
}
/* Last partial row */
if (y + shift < ny)
data |= *src_col << shift;
*dst_col = (*dst_col & mask3) | (data & mask4);
}
}
/* put a string at a given pixel position, skipping first ofs pixel columns */
static void lcd_putsxyofs(int x, int y, int ofs, const unsigned char *str)
{
int ch;
struct font* pf = font_get(curfont);
while ((ch = *str++) != '\0' && x < LCD_WIDTH)
{
int gwidth, width;
/* check input range */
if (ch < pf->firstchar || ch >= pf->firstchar+pf->size)
ch = pf->defaultchar;
ch -= pf->firstchar;
/* get proportional width and glyph bits */
gwidth = pf->width ? pf->width[ch] : pf->maxwidth;
width = MIN (gwidth, LCD_WIDTH - x);
if (ofs != 0)
{
if (ofs > width)
{
ofs -= width;
continue;
}
width -= ofs;
}
if (width > 0)
{
unsigned int i;
const unsigned char* bits = pf->bits +
(pf->offset ? pf->offset[ch]
: ((pf->height + 7) / 8 * pf->maxwidth * ch));
if (ofs != 0)
{
for (i = 0; i < pf->height; i += 8)
{
lcd_bitmap (bits + ofs, x, y + i, width,
MIN(8, pf->height - i), true);
bits += gwidth;
}
}
else
lcd_bitmap ((unsigned char*) bits, x, y, gwidth,
pf->height, true);
x += width;
}
ofs = 0;
}
}
/* put a string at a given pixel position */
void lcd_putsxy(int x, int y, const unsigned char *str)
{
lcd_putsxyofs(x, y, 0, str);
}
/*** line oriented text output ***/
void lcd_puts_style(int x, int y, const unsigned char *str, int style)
{
int xpos,ypos,w,h;
/* make sure scrolling is turned off on the line we are updating */
scrolling_lines &= ~(1 << y);
if(!str || !str[0])
return;
lcd_getstringsize(str, &w, &h);
xpos = xmargin + x*w / strlen(str);
ypos = ymargin + y*h;
lcd_putsxy(xpos, ypos, str);
lcd_clearrect(xpos + w, ypos, LCD_WIDTH - (xpos + w), h);
if (style & STYLE_INVERT)
lcd_invertrect(xpos, ypos, LCD_WIDTH - xpos, h);
}
/* put a string at a given char position */
void lcd_puts(int x, int y, const unsigned char *str)
{
lcd_puts_style(x, y, str, STYLE_DEFAULT);
}
/*** scrolling ***/
/* Reverse the invert setting of the scrolling line (if any) at given char
position. Setting will go into affect next time line scrolls. */
void lcd_invertscroll(int x, int y)
{
struct scrollinfo* s;
(void)x;
s = &scroll[y];
s->invert = !s->invert;
}
void lcd_stop_scroll(void)
{
scrolling_lines=0;
}
void lcd_scroll_speed(int speed)
{
scroll_ticks = scroll_tick_table[speed];
}
void lcd_scroll_step(int step)
{
scroll_step = step;
}
void lcd_scroll_delay(int ms)
{
scroll_delay = ms / (HZ / 10);
}
void lcd_bidir_scroll(int percent)
{
bidir_limit = percent;
} }
void lcd_puts_scroll(int x, int y, const unsigned char *string) void lcd_puts_scroll(int x, int y, const unsigned char *string)
@ -840,36 +829,6 @@ void lcd_puts_scroll_style(int x, int y, const unsigned char *string, int style)
scrolling_lines &= ~(1<<y); scrolling_lines &= ~(1<<y);
} }
void lcd_stop_scroll(void)
{
scrolling_lines=0;
}
static const char scroll_tick_table[16] = {
/* Hz values:
1, 1.25, 1.55, 2, 2.5, 3.12, 4, 5, 6.25, 8.33, 10, 12.5, 16.7, 20, 25, 33 */
100, 80, 64, 50, 40, 32, 25, 20, 16, 12, 10, 8, 6, 5, 4, 3
};
void lcd_scroll_speed(int speed)
{
scroll_ticks = scroll_tick_table[speed];
}
void lcd_scroll_step(int step)
{
scroll_step = step;
}
void lcd_scroll_delay(int ms)
{
scroll_delay = ms / (HZ / 10);
}
void lcd_bidir_scroll(int percent)
{
bidir_limit = percent;
}
static void scroll_thread(void) static void scroll_thread(void)
{ {
struct font* pf; struct font* pf;
@ -932,4 +891,3 @@ static void scroll_thread(void)
} }
} }
#endif

14
firmware/drivers/lcd-player.c
View file

@ -64,20 +64,6 @@ extern unsigned char extended_font_player[NO_EXTENDED_LCD_CHARS][8];
/*** generic code ***/ /*** generic code ***/
struct scrollinfo {
int mode;
char text[MAX_PATH];
int textlen;
int offset;
int turn_offset;
int startx;
int starty;
long scroll_start_tick;
int direction; /* +1 for right or -1 for left*/
int jump_scroll;
int jump_scroll_steps;
};
#define MAX_CURSOR_CHARS 8 #define MAX_CURSOR_CHARS 8
struct cursorinfo { struct cursorinfo {
int len; int len;

924
firmware/drivers/lcd-recorder.c
View file

File diff suppressed because it is too large Load diff

69
firmware/export/lcd-remote.h
View file

@ -7,7 +7,7 @@
* \/ \/ \/ \/ \/ * \/ \/ \/ \/ \/
* $Id$ * $Id$
* *
* Copyright (C) 2005 by Richard S. La Charité * Copyright (C) 2005 by Richard S. La Charité
* *
* All files in this archive are subject to the GNU General Public License. * All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement. * See the file COPYING in the source tree root for full license agreement.
@ -25,6 +25,7 @@
#include "config.h" #include "config.h"
#ifdef HAVE_REMOTE_LCD #ifdef HAVE_REMOTE_LCD
#define REMOTE_DRAW_PIXEL(x,y) lcd_remote_framebuffer[(y)/8][(x)] |= (1<<((y)&7)) #define REMOTE_DRAW_PIXEL(x,y) lcd_remote_framebuffer[(y)/8][(x)] |= (1<<((y)&7))
#define REMOTE_CLEAR_PIXEL(x,y) lcd_remote_framebuffer[(y)/8][(x)] &= ~(1<<((y)&7)) #define REMOTE_CLEAR_PIXEL(x,y) lcd_remote_framebuffer[(y)/8][(x)] &= ~(1<<((y)&7))
#define REMOTE_INVERT_PIXEL(x,y) lcd_remote_framebuffer[(y)/8][(x)] ^= (1<<((y)&7)) #define REMOTE_INVERT_PIXEL(x,y) lcd_remote_framebuffer[(y)/8][(x)] ^= (1<<((y)&7))
@ -33,66 +34,52 @@
#define STYLE_INVERT 1 #define STYLE_INVERT 1
extern void lcd_remote_init(void); extern void lcd_remote_init(void);
extern void lcd_remote_clear_display(void);
extern void lcd_remote_backlight_on(void); extern void lcd_remote_backlight_on(void);
extern void lcd_remote_backlight_off(void); extern void lcd_remote_backlight_off(void);
extern void lcd_remote_stop_scroll(void);
extern void lcd_remote_scroll_speed( int speed );
extern void lcd_remote_scroll_delay( int ms );
extern void lcd_remote_set_contrast(int val);
extern int lcd_remote_default_contrast(void); extern int lcd_remote_default_contrast(void);
extern void lcd_remote_update(void); extern void lcd_remote_set_contrast(int val);
extern void lcd_remote_update_rect (int x_start, int y,
int width, int height);
extern void lcd_remote_clear_display(void);
extern void lcd_remote_puts(int x, int y, const unsigned char *string); extern void lcd_remote_puts(int x, int y, const unsigned char *string);
extern void lcd_remote_puts_style(int x, int y, const unsigned char *string, extern void lcd_remote_puts_style(int x, int y, const unsigned char *string,
int style); int style);
extern void lcd_remote_putc(int x, int y, unsigned short ch);
extern void lcd_remote_stop_scroll(void);
extern void lcd_remote_scroll_speed(int speed);
extern void lcd_remote_scroll_delay(int ms);
extern void lcd_remote_puts_scroll(int x, int y, const unsigned char* string); extern void lcd_remote_puts_scroll(int x, int y, const unsigned char* string);
extern void lcd_remote_puts_scroll_style(int x, int y, const unsigned char* string, extern void lcd_remote_puts_scroll_style(int x, int y, const unsigned char* string,
int style); int style);
extern void lcd_remote_putc(int x, int y, unsigned short ch); extern void lcd_remote_update(void);
extern void lcd_remote_update_rect int x_start, int y, int width, int height);
/* Memory copy of display bitmap */
extern unsigned char lcd_remote_framebuffer[LCD_REMOTE_HEIGHT/8][LCD_REMOTE_WIDTH];
extern void lcd_remote_set_invert_display(bool yesno);
extern void lcd_remote_set_flip(bool yesno);
extern void lcd_remote_roll(int pixels);
extern void lcd_remote_setmargins(int xmargin, int ymargin); extern void lcd_remote_setmargins(int xmargin, int ymargin);
extern int lcd_remote_getxmargin(void); extern int lcd_remote_getxmargin(void);
extern int lcd_remote_getymargin(void); extern int lcd_remote_getymargin(void);
extern void lcd_remote_setfont(int font);
/* extern int lcd_remote_getstringsize(const unsigned char *str, int *w, int *h);
* Memory copy of display bitmap
*/
extern unsigned char lcd_remote_framebuffer[LCD_REMOTE_HEIGHT/8][LCD_REMOTE_WIDTH];
extern void lcd_remote_bitmap (const unsigned char *src, int x, int y,
int nx, int ny, bool clear);
extern void lcd_remote_clearrect (int x, int y, int nx, int ny);
extern void lcd_remote_fillrect (int x, int y, int nx, int ny);
extern void lcd_remote_invertrect (int x, int y, int nx, int ny);
extern void lcd_remote_drawrect (int x, int y, int nx, int ny);
extern void lcd_remote_invertrect (int x, int y, int nx, int ny);
//extern void lcd_invertscroll(int x, int y);
extern void lcd_remote_drawline( int x1, int y1, int x2, int y2 );
extern void lcd_remote_clearline( int x1, int y1, int x2, int y2 );
extern void lcd_remote_drawpixel(int x, int y); extern void lcd_remote_drawpixel(int x, int y);
extern void lcd_remote_clearpixel(int x, int y); extern void lcd_remote_clearpixel(int x, int y);
extern void lcd_remote_invertpixel(int x, int y); extern void lcd_remote_invertpixel(int x, int y);
extern void lcd_remote_roll(int pixels); extern void lcd_remote_drawline(int x1, int y1, int x2, int y2);
extern void lcd_remote_set_invert_display(bool yesno); extern void lcd_remote_clearline(int x1, int y1, int x2, int y2);
extern void lcd_remote_set_flip(bool yesno); extern void lcd_remote_drawrect(int x, int y, int nx, int ny);
extern void lcd_remote_clearrect(int x, int y, int nx, int ny);
extern void lcd_remote_fillrect(int x, int y, int nx, int ny);
extern void lcd_remote_invertrect(int x, int y, int nx, int ny);
extern void lcd_remote_bitmap(const unsigned char *src, int x, int y,
int nx, int ny, bool clear);
extern void lcd_remote_putsxy(int x, int y, const unsigned char *string);
extern void lcd_remote_invertscroll(int x, int y);
extern void lcd_remote_bidir_scroll(int threshold); extern void lcd_remote_bidir_scroll(int threshold);
extern void lcd_remote_scroll_step(int pixels); extern void lcd_remote_scroll_step(int pixels);
extern void lcd_remote_setfont(int font);
extern void lcd_remote_putsxy(int x, int y, const unsigned char *string);
extern int lcd_remote_getstringsize(const unsigned char *str, int *w, int *h);
#endif #endif
#endif #endif

105
firmware/export/lcd.h
View file

@ -29,35 +29,38 @@
#ifdef SIMULATOR #ifdef SIMULATOR
#define lcd_icon(x,y) sim_lcd_icon(x,y) #define lcd_icon(x,y) sim_lcd_icon(x,y)
#define MAX_PATH 260
#else
#include "file.h" /* for MAX_PATH; FIXME: Why does this not work for sims? */
#endif #endif
/* common functions */ /* common functions */
extern void lcd_write_command(int byte);
extern void lcd_write_command_ex(int cmd, int data1, int data2);
extern void lcd_write_data(const unsigned char* p_bytes, int count);
extern void lcd_init(void); extern void lcd_init(void);
extern void lcd_clear_display(void);
extern void lcd_backlight(bool on); extern void lcd_backlight(bool on);
extern int lcd_default_contrast(void);
extern void lcd_set_contrast(int val);
extern void lcd_clear_display(void);
extern void lcd_puts(int x, int y, const unsigned char *string); extern void lcd_puts(int x, int y, const unsigned char *string);
extern void lcd_puts_style(int x, int y, const unsigned char *string, int style); extern void lcd_puts_style(int x, int y, const unsigned char *string, int style);
extern void lcd_putc(int x, int y, unsigned short ch); extern void lcd_putc(int x, int y, unsigned short ch);
extern void lcd_stop_scroll(void);
extern void lcd_scroll_speed(int speed);
extern void lcd_scroll_delay(int ms);
extern void lcd_puts_scroll(int x, int y, const unsigned char* string); extern void lcd_puts_scroll(int x, int y, const unsigned char* string);
extern void lcd_puts_scroll_style(int x, int y, const unsigned char* string, extern void lcd_puts_scroll_style(int x, int y, const unsigned char* string,
int style); int style);
extern void lcd_icon(int icon, bool enable); extern void lcd_icon(int icon, bool enable);
extern void lcd_stop_scroll(void);
extern void lcd_scroll_speed( int speed );
extern void lcd_scroll_delay( int ms );
extern void lcd_set_contrast(int val);
extern void lcd_write_command( int byte );
extern void lcd_write_command_ex( int cmd, int data1, int data2);
extern void lcd_write_data( const unsigned char* p_bytes, int count );
extern int lcd_default_contrast(void);
#if defined(SIMULATOR) || defined(HAVE_LCD_BITMAP) #if defined(SIMULATOR) || defined(HAVE_LCD_BITMAP)
extern void lcd_update(void);
/* performance function */ /* performance function */
extern void lcd_blit(const unsigned char* p_data, int x, int y, int width, extern void lcd_blit(const unsigned char* p_data, int x, int y, int width,
int height, int stride); int height, int stride);
extern void lcd_update(void);
/* update a fraction of the screen */ /* update a fraction of the screen */
extern void lcd_update_rect(int x, int y, int width, int height); extern void lcd_update_rect(int x, int y, int width, int height);
@ -97,56 +100,84 @@ enum
ICON_PARAM ICON_PARAM
}; };
extern void lcd_double_height(bool on);
extern void lcd_define_hw_pattern(int which,const char *pattern,int length); extern void lcd_define_hw_pattern(int which,const char *pattern,int length);
extern void lcd_define_pattern(int which,const char *pattern); extern void lcd_define_pattern(int which,const char *pattern);
extern void lcd_double_height (bool on); unsigned char lcd_get_locked_pattern(void);
void lcd_unlock_pattern(unsigned char pat);
void lcd_put_cursor(int x, int y, char cursor_char);
void lcd_remove_cursor(void);
extern void lcd_bidir_scroll(int threshold);
#define JUMP_SCROLL_ALWAYS 5 #define JUMP_SCROLL_ALWAYS 5
extern void lcd_jump_scroll(int mode); /* 0=off, 1=once, ..., ALWAYS */ extern void lcd_jump_scroll(int mode); /* 0=off, 1=once, ..., ALWAYS */
extern void lcd_jump_scroll_delay(int ms); extern void lcd_jump_scroll_delay(int ms);
unsigned char lcd_get_locked_pattern(void);
void lcd_unlock_pattern(unsigned char pat);
extern void lcd_bidir_scroll(int threshold);
void lcd_put_cursor(int x, int y, char cursor_char);
void lcd_remove_cursor(void);
#endif #endif
#if defined(HAVE_LCD_BITMAP) || defined(SIMULATOR) #if defined(HAVE_LCD_BITMAP) || defined(SIMULATOR)
#if defined(HAVE_LCD_CHARCELLS) && defined(SIMULATOR)
#endif
#define DRAW_PIXEL(x,y) lcd_framebuffer[(y)/8][(x)] |= (1<<((y)&7)) #define DRAW_PIXEL(x,y) lcd_framebuffer[(y)/8][(x)] |= (1<<((y)&7))
#define CLEAR_PIXEL(x,y) lcd_framebuffer[(y)/8][(x)] &= ~(1<<((y)&7)) #define CLEAR_PIXEL(x,y) lcd_framebuffer[(y)/8][(x)] &= ~(1<<((y)&7))
#define INVERT_PIXEL(x,y) lcd_framebuffer[(y)/8][(x)] ^= (1<<((y)&7)) #define INVERT_PIXEL(x,y) lcd_framebuffer[(y)/8][(x)] ^= (1<<((y)&7))
/* /* Memory copy of display bitmap */
* Memory copy of display bitmap
*/
extern unsigned char lcd_framebuffer[LCD_HEIGHT/8][LCD_WIDTH]; extern unsigned char lcd_framebuffer[LCD_HEIGHT/8][LCD_WIDTH];
extern void lcd_set_invert_display(bool yesno);
extern void lcd_set_flip(bool yesno);
extern void lcd_roll(int pixels);
extern void lcd_setmargins(int xmargin, int ymargin); extern void lcd_setmargins(int xmargin, int ymargin);
extern int lcd_getxmargin(void); extern int lcd_getxmargin(void);
extern int lcd_getymargin(void); extern int lcd_getymargin(void);
extern void lcd_bitmap (const unsigned char *src, int x, int y, int nx, int ny, extern void lcd_setfont(int font);
bool clear); extern int lcd_getstringsize(const unsigned char *str, int *w, int *h);
extern void lcd_clearrect (int x, int y, int nx, int ny);
extern void lcd_fillrect (int x, int y, int nx, int ny);
extern void lcd_drawrect (int x, int y, int nx, int ny);
extern void lcd_invertrect (int x, int y, int nx, int ny);
extern void lcd_invertscroll(int x, int y);
extern void lcd_drawline( int x1, int y1, int x2, int y2 );
extern void lcd_clearline( int x1, int y1, int x2, int y2 );
extern void lcd_drawpixel(int x, int y); extern void lcd_drawpixel(int x, int y);
extern void lcd_clearpixel(int x, int y); extern void lcd_clearpixel(int x, int y);
extern void lcd_invertpixel(int x, int y); extern void lcd_invertpixel(int x, int y);
extern void lcd_roll(int pixels); extern void lcd_drawline(int x1, int y1, int x2, int y2);
extern void lcd_set_invert_display(bool yesno); extern void lcd_clearline(int x1, int y1, int x2, int y2);
extern void lcd_set_flip(bool yesno); extern void lcd_drawrect(int x, int y, int nx, int ny);
extern void lcd_clearrect(int x, int y, int nx, int ny);
extern void lcd_fillrect(int x, int y, int nx, int ny);
extern void lcd_invertrect(int x, int y, int nx, int ny);
extern void lcd_bitmap(const unsigned char *src, int x, int y, int nx, int ny,
bool clear);
extern void lcd_putsxy(int x, int y, const unsigned char *string);
extern void lcd_invertscroll(int x, int y);
extern void lcd_bidir_scroll(int threshold); extern void lcd_bidir_scroll(int threshold);
extern void lcd_scroll_step(int pixels); extern void lcd_scroll_step(int pixels);
extern void lcd_setfont(int font);
extern void lcd_putsxy(int x, int y, const unsigned char *string);
extern int lcd_getstringsize(const unsigned char *str, int *w, int *h);
#endif /* CHARCELLS / BITMAP */ #endif /* CHARCELLS / BITMAP */
/* internal usage, but in multiple drivers */
#ifdef HAVE_LCD_BITMAP
#define SCROLL_SPACING 3
struct scrollinfo {
char line[MAX_PATH + LCD_WIDTH/2 + SCROLL_SPACING + 2];
int len; /* length of line in chars */
int width; /* length of line in pixels */
int offset;
int startx;
bool backward; /* scroll presently forward or backward? */
bool bidir;
bool invert; /* invert the scrolled text */
long start_tick;
};
#else /* !HAVE_LCD_BITMAP */
struct scrollinfo {
int mode;
char text[MAX_PATH];
int textlen;
int offset;
int turn_offset;
int startx;
int starty;
long scroll_start_tick;
int direction; /* +1 for right or -1 for left*/
int jump_scroll;
int jump_scroll_steps;
};
#endif
#endif /* __LCD_H__ */ #endif /* __LCD_H__ */