diff --git a/firmware/drivers/audio/eros_qn_codec.c b/firmware/drivers/audio/eros_qn_codec.c
index da50d62fe5..39a421ee92 100644
--- a/firmware/drivers/audio/eros_qn_codec.c
+++ b/firmware/drivers/audio/eros_qn_codec.c
@@ -31,10 +31,10 @@
 static long int vol_l_hw = 0;
 static long int vol_r_hw = 0;
 
-/* internal: mute the headphone amp. 0 - unmuted, 1 - muted */
-void audiohw_mute_hp(int mute);
+/* internal: Switch the output sink. 0 - headphones, 1 - line out */
+void audiohw_switch_output(int select);
 
-void pcm5102_set_outputs(void)
+void dac_set_outputs(void)
 {
     audiohw_set_volume(vol_l_hw, vol_r_hw);
 }
@@ -56,15 +56,14 @@ void audiohw_set_volume(int vol_l, int vol_r)
      * blow out our eardrums cranking it to full */
     if (lineout_inserted() && !headphones_inserted())
     {
-        l = r = global_settings.volume_limit * 10;
+        audiohw_switch_output(1);
 
-        /* mute the headphone amp if not plugged in */
-        audiohw_mute_hp(1);
+        l = r = global_settings.volume_limit * 10;
     }
     else
     {
-        /* unmute the headphone amp when plugged in */
-        audiohw_mute_hp(0);
+        audiohw_switch_output(0);
+        
         l = vol_l;
         r = vol_r;
     }
@@ -76,14 +75,14 @@ void audiohw_set_volume(int vol_l, int vol_r)
     pcm_set_master_volume(l, r);
 }
 
-void audiohw_mute_hp(int mute)
+void audiohw_switch_output(int select)
 {
-    if (mute == 0)
+    if (select == 0)
     {
-        gpio_set_level(GPIO_MAX97220_SHDN, 1);
+        gpio_set_level(GPIO_STEREOSW_SEL, 0);
     }
     else
     {
-        gpio_set_level(GPIO_MAX97220_SHDN, 0);
+        gpio_set_level(GPIO_STEREOSW_SEL, 1);
     }
 }
diff --git a/firmware/export/eros_qn_codec.h b/firmware/export/eros_qn_codec.h
index 851ab63362..bf108aa1c7 100644
--- a/firmware/export/eros_qn_codec.h
+++ b/firmware/export/eros_qn_codec.h
@@ -39,6 +39,6 @@ AUDIOHW_SETTING(VOLUME, "dB", 0, 2, PCM5102A_VOLUME_MIN/10, PCM5102A_VOLUME_MAX/
 
 /* this just calls audiohw_set_volume() with the last (locally) known volume,
  * used for switching to/from fixed line out volume. */
-void pcm5102_set_outputs(void);
+void dac_set_outputs(void);
 
 #endif
diff --git a/firmware/target/mips/ingenic_x1000/erosqnative/audiohw-erosqnative.c b/firmware/target/mips/ingenic_x1000/erosqnative/audiohw-erosqnative.c
index b32a32a3a3..c53da728ff 100644
--- a/firmware/target/mips/ingenic_x1000/erosqnative/audiohw-erosqnative.c
+++ b/firmware/target/mips/ingenic_x1000/erosqnative/audiohw-erosqnative.c
@@ -27,20 +27,22 @@
 #include "gpio-x1000.h"
 #include "logf.h"
 
-/* Audio path appears to be:
- * DAC --> HP Amp --> Stereo Switch --> HP OUT
- *     \--> LO OUT
+/*
+ * Earlier devices audio path appears to be:
+ * DAC \--> HP Amp --> Stereo Switch --> HP OUT
+ *      \-> LO OUT
  *
- * The real purpose of the Stereo Switch is not clear.
- * It appears to switch sources between the HP amp and something,
- * likely something unimplemented. */
+ * Recent devices, the audio path seems to have changed to:
+ * DAC --> HP Amp --> Stereo Switch \--> HP OUT
+ *                                   \-> LO OUT
+ */
 
 void audiohw_init(void)
 {
     /* explicitly mute everything */
-    gpio_set_level(GPIO_MAX97220_SHDN, 0);
-    gpio_set_level(GPIO_ISL54405_MUTE, 1);
-    gpio_set_level(GPIO_PCM5102A_XMIT, 0);
+    gpio_set_level(GPIO_HPAMP_SHDN, 0);
+    gpio_set_level(GPIO_STEREOSW_MUTE, 1);
+    gpio_set_level(GPIO_DAC_XMIT, 0);
 
     aic_set_play_last_sample(true);
     aic_set_external_codec(true);
@@ -53,8 +55,8 @@ void audiohw_init(void)
     mdelay(10);
 
     /* power on DAC and HP Amp */
-    gpio_set_level(GPIO_PCM5102A_ANALOG_PWR, 1);
-    gpio_set_level(GPIO_MAX97220_POWER, 1);
+    gpio_set_level(GPIO_DAC_ANALOG_PWR, 1);
+    gpio_set_level(GPIO_HPAMP_POWER, 1);
 }
 
 void audiohw_postinit(void)
@@ -76,23 +78,23 @@ void audiohw_postinit(void)
     jz_writef(AIC_CCR, ERPL(0));
 
     /* unmute - attempt to make power-on pop-free */
-    gpio_set_level(GPIO_ISL54405_SEL, 0);
-    gpio_set_level(GPIO_MAX97220_SHDN, 1);
+    gpio_set_level(GPIO_STEREOSW_SEL, 0);
+    gpio_set_level(GPIO_HPAMP_SHDN, 1);
     mdelay(10);
-    gpio_set_level(GPIO_PCM5102A_XMIT, 1);
+    gpio_set_level(GPIO_DAC_XMIT, 1);
     mdelay(10);
-    gpio_set_level(GPIO_ISL54405_MUTE, 0);
+    gpio_set_level(GPIO_STEREOSW_MUTE, 0);
 }
 
 /* TODO: get shutdown just right according to dac datasheet */
 void audiohw_close(void)
 {
     /* mute - attempt to make power-off pop-free */
-    gpio_set_level(GPIO_ISL54405_MUTE, 1);
+    gpio_set_level(GPIO_STEREOSW_MUTE, 1);
     mdelay(10);
-    gpio_set_level(GPIO_PCM5102A_XMIT, 0);
+    gpio_set_level(GPIO_DAC_XMIT, 0);
     mdelay(10);
-    gpio_set_level(GPIO_MAX97220_SHDN, 0);
+    gpio_set_level(GPIO_HPAMP_SHDN, 0);
 }
 
 void audiohw_set_frequency(int fsel)
diff --git a/firmware/target/mips/ingenic_x1000/erosqnative/button-erosqnative.c b/firmware/target/mips/ingenic_x1000/erosqnative/button-erosqnative.c
index 6c50021ce1..d82cb5b5dc 100644
--- a/firmware/target/mips/ingenic_x1000/erosqnative/button-erosqnative.c
+++ b/firmware/target/mips/ingenic_x1000/erosqnative/button-erosqnative.c
@@ -127,7 +127,7 @@ bool headphones_inserted(void)
     {
         hp_detect_reg_old = hp_detect_reg;
 #if !defined(BOOTLOADER)
-        pcm5102_set_outputs();
+        dac_set_outputs();
 #endif
     }
     return hp_detect_reg & 0x10 ? false : true;
@@ -140,7 +140,7 @@ bool lineout_inserted(void)
     {
         hp_detect_reg_old = hp_detect_reg;
 #if !defined(BOOTLOADER)
-        pcm5102_set_outputs();
+        dac_set_outputs();
 #endif
     }
     return hp_detect_reg & 0x20 ? false : true;
diff --git a/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h b/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h
index 376eae136e..3318a39786 100644
--- a/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h
+++ b/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h
@@ -24,26 +24,26 @@ DEFINE_PINGROUP(I2S,            GPIO_B,   0x1f <<  0,   GPIOF_DEVICE(1))
 DEFINE_PINGROUP(I2C2,           GPIO_D,      3 <<  0,   GPIOF_DEVICE(1))
 
 /*          Name                Pin             Function */
-/* mute DAC - 0 - mute, 1 - play. Affects both HP and LO. */
-DEFINE_GPIO(PCM5102A_XMIT,      GPIO_PB(12),    GPIOF_OUTPUT(0))
+/* mute DAC: 0 - mute, 1 - play */
+DEFINE_GPIO(DAC_XMIT,           GPIO_PB(12),    GPIOF_OUTPUT(0))
 
-/* mute HP amp, no effect on LO. 0 - mute, 1 - play */
-DEFINE_GPIO(MAX97220_SHDN,      GPIO_PB(8),     GPIOF_OUTPUT(0))
+/* mute HP amp: 0 - mute, 1 - play */
+DEFINE_GPIO(HPAMP_SHDN,         GPIO_PB(8),     GPIOF_OUTPUT(0))
 
-/* mute audio mux, only affects Headphone out.
- * 0 - play, 1 - mute */
-DEFINE_GPIO(ISL54405_MUTE,      GPIO_PB(15),    GPIOF_OUTPUT(1))
+/* mute audio mux: 0 - play, 1 - mute */
+DEFINE_GPIO(STEREOSW_MUTE,      GPIO_PB(15),    GPIOF_OUTPUT(1))
 
-/* switches HP on/off - 0 HP on, 1 hp off, has no effect on LO.
- * As best I can tell, it switches HP Out sources between HP amp and something
- * not implemented - there seem to be resistors missing. */
-DEFINE_GPIO(ISL54405_SEL,       GPIO_PB(5),     GPIOF_OUTPUT(0))
+/*
+ * Original devices: switches HP on/off - 0 HP on, 1 HP off, no effect on LO.
+ * Newer devices: switches between HP and LO - 0 HP, 1 LO.
+ */
+DEFINE_GPIO(STEREOSW_SEL,       GPIO_PB(5),     GPIOF_OUTPUT(0))
 
 /* DAC AVDD */
-DEFINE_GPIO(PCM5102A_ANALOG_PWR,       GPIO_PB(9),     GPIOF_OUTPUT(0))
+DEFINE_GPIO(DAC_ANALOG_PWR,     GPIO_PB(9),     GPIOF_OUTPUT(0))
 
 /* Headphone Amp power */
-DEFINE_GPIO(MAX97220_POWER,     GPIO_PB(6),     GPIOF_OUTPUT(0))
+DEFINE_GPIO(HPAMP_POWER,        GPIO_PB(6),     GPIOF_OUTPUT(0))
 
 /* SD card */
 DEFINE_GPIO(MSC0_CD,            GPIO_PB(11),    GPIOF_INPUT)