Failed attempt to use DMA

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@453 a1c6a512-1295-4272-9138-f99709370657

firmware/test/i2c/Makefile

@@ -9,8 +9,9 @@ INCLUDES=-I../.. -I../../drivers
 CFLAGS = -g -Wall -m1 -nostdlib -Wstrict-prototypes -fschedule-insns -fno-builtin $(INCLUDES) -DDEBUG
 AFLAGS += -small -relax
 
-OBJS= crt0.o main.o ../../drivers/i2c.o ../../drivers/mas.o ../../debug.o \
+OBJS= ../../crt0.o main.o ../../drivers/i2c.o ../../drivers/mas.o \
-	../../common/sprintf.o mp3data.o
+	 ../../debug.o ../../kernel.o ../../thread.o ../../common/sprintf.o \
+	 ../../panic.o mp3data.o
 
 %.o: %.S
 	$(CC) -o $@ $(CFLAGS) $(INCLUDES) $(DEFS) -c $<

firmware/test/i2c/app.lds

@@ -2,22 +2,34 @@ ENTRY(start)
 OUTPUT_FORMAT(elf32-sh)
 SECTIONS
 {
-    .text 0x09018000 :
+    .text 0x09010000 :
+    {
+	*(.vectors)
+        . = ALIGN(0x200);
+        *(.init.text)
+    }
+
+    .text :
     {
-        *(.rodata)
         *(.text)
     }
 
     .data :
     {
+        *(.rodata)
         *(.data)
     }
 
+    .rodata :
+    {
+        *(.rodata)
+    }
+
     .bss :
     {
         *(.bss)
-       _end = . + 0x8000;
+       _end = .;
-       _stack = . + 0x9000;
+       _stack = . + 0x1000;
        _edata = .;
     }
 }

firmware/test/i2c/main.c

@@ -82,8 +82,8 @@ void setup_sci0(void)
     /* Clear FER and PER */
     SSR0 &= 0xe7;
 
-    /* Set interrupt D priority to 0 */
+    /* Set interrupt ITU2 and SCI0 priority to 0 */
-//    IPRD &= 0x0ff0;
+    IPRD &= 0x0ff0;
 
     /* set IRQ6 and IRQ7 to edge detect */
 //    ICR |= 0x03;
@@ -98,7 +98,7 @@ void setup_sci0(void)
     IPRB = 0;
     
     /* Enable Tx (only!) */
-    SCR0 |= 0x20;
+    SCR0 |= 0xa0;
 }
 
 int mas_tx_ready(void)
@@ -106,12 +106,32 @@ int mas_tx_ready(void)
     return (SSR0 & SCI_TDRE);
 }
 
+void init_dma(void)
+{
+    SAR3 = (unsigned int) mp3data;
+    DAR3 = 0xFFFFEC3;
+    CHCR3 = 0x1500; /* Single address destination, TXI0 */
+    DTCR3 = 64000;
+    DMAOR = 0x0001; /* Enable DMA */
+}
+
+void start_dma(void)
+{
+    CHCR3 |= 1;
+}
+
+void stop_dma(void)
+{
+    CHCR3 &= ~1;
+}
+
 
 int main(void)
 {
    char buf[40];
    char str[32];
    int i=0;
+   int dma_on = 0;
 
    /* Clear it all! */
     SSR1 &= ~(SCI_RDRF | SCI_ORER | SCI_PER | SCI_FER);
@@ -217,11 +237,15 @@ int main(void)
 
    i = 0;
 
+   init_dma();
+
    while(1)
    {
        /* Demand pin high? */
        if(PBDR & 0x4000)
        {
+           start_dma();
+#if 0
            /* More data to write? */
            if(i < mp3datalen)
            {
@@ -232,18 +256,13 @@ int main(void)
                TDR0 = fliptable[mp3data[i++]];
                SSR0 &= ~SCI_TDRE;
            }
+#endif
+       }
+       else
+       {
+           stop_dma();
        }
    }
    
    while(1);
 }
-
-extern const void stack(void);
-
-const void* vectors[] __attribute__ ((section (".vectors"))) = 
-{
-   main,    /* Power-on reset */
-   stack,   /* Power-on reset (stack pointer) */
-   main,    /* Manual reset */
-   stack    /* Manual reset (stack pointer) */
-};