devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Packard Bell Vibe: language corrections in the manual, thanks to: AlexP, linuxstb.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25752 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Szymon Dziok 2010-04-28 20:55:27 +00:00
parent 64d37632fd
commit 5187b4199b
1 changed files with 12 additions and 13 deletions
Download patch file Download diff file Expand all files Collapse all files

25
manual/rockbox_interface/main.tex
View file

@ -409,21 +409,21 @@ detail in the following paragraph.
Hold or lay the \dap{} so that the side with the controls and Hold or lay the \dap{} so that the side with the controls and
LCD is facing towards you. Below the LCD is the touch sensitive pad with the \ButtonMenu{}, LCD is facing towards you. Below the LCD is the touch sensitive pad with the \ButtonMenu{},
\ButtonPlay{}, \ButtonLeft{}, \ButtonRight{} controls and the scroll pad in the centre. The \ButtonPlay{}, \ButtonLeft{}, \ButtonRight{} controls and the scroll pad in the centre. The
scroll pad is oriented vertically and it is between the \ButtonOK{} and \ButtonCancel{} buttons. scroll pad is oriented vertically between the \ButtonOK{} and \ButtonCancel{} buttons.
Sliding the finger between these buttons down or up acts as \ButtonDown{} or \ButtonUp{} Sliding a finger up or down the scroll pad acts as \ButtonUp{} and \ButtonDown{} respectively.
action respectively. Note that the scroll pad is sensitive, so you will need to move Note that the scroll pad is sensitive, so you will need to move
slowly at first and get a feel for how it works. slowly at first and get a feel for how it works.
There are two buttons on the right hand side of the \dap{}: \ButtonPower{} on the top and There are two buttons on the right hand side of the \dap{}: \ButtonPower{} on the top and
\ButtonRec{} underneath. Under these buttons, from top to bottom you can find: USB connector, \ButtonRec{} underneath. Under these buttons, from top to bottom you can find: USB connector,
power connector and the reset hole to make a hardware reset. power connector and the reset hole if you need to perform a hardware reset.
The \ButtonHold{} switch is located on the left hand side of the \dap{}. Note that when the The \ButtonHold{} switch is located on the left hand side of the \dap{}. Note that when the
\ButtonHold{} switch is moved to the top of the \dap{}, hold is on, and none of the other \ButtonHold{} switch is moved towards the top of the \dap{}, hold is turned on and all the
controls do anything. Be sure \ButtonHold{} is off before trying to use your player. other controls are disabled. Be sure \ButtonHold{} is off before trying to use your player.
On the top on the \dap{} is the internal microphone on the left and the line-in jack, near On the top on the \dap{} is the internal microphone on the left and the line-in socket on the
the headphone jack on the right.} right, near the headphone socket.}
% %
\opt{player}{ \opt{player}{
The main controls of this player are a four-way button on the right below The main controls of this player are a four-way button on the right below
@ -639,11 +639,10 @@ To turn on and off your Rockbox enabled \dap{} use the following keys:
\opt{vibe500} \opt{vibe500}
{ {
Rockbox has a dual-boot feature. It loads the original firmware from Rockbox has a dual-boot feature where it is possible to load the original firmware from
the file \fname{/System/OF.mi4}. To boot into the original firmware, the file \fname{/System/OF.mi4}. To boot into the original firmware press and release
press the \ButtonPower{} normally, without holding it. After the backlight \ButtonPower{} and then immediately after the backlight turns on, press the \ButtonOK{}
reaction (when it turns on) immediately press and hold the \ButtonOK{} button and keep it pressed until the original firmware starts.
button.
} }
} }