devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Onda VX747: don't fully init the LCD when not doing an USB_BOOT compile (fixes flashes when booting up)

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22051 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Maurus Cuelenaere 2009-07-26 13:27:12 +00:00
parent 9e9fb929b4
commit 4ce26ff328
2 changed files with 19 additions and 12 deletions
Download patch file Download diff file Expand all files Collapse all files

2
bootloader/ondavx747.c
View file

@ -22,7 +22,6 @@
#include "config.h"
#include "jz4740.h"
#include "backlight.h"
#include "backlight-target.h"
#include "font.h"
#include "lcd.h"
#include "usb.h"
@ -192,7 +191,6 @@ int main(void)
{
printf("Starting Rockbox...");
adc_close(); /* Disable SADC */
_backlight_off(); /* Force backlight off to prevent LCD 'flicker' */
disable_interrupt();
kernel_entry = (void*) CONFIG_SDRAM_START;

13
firmware/target/mips/ingenic_jz47xx/onda_vx747/lcd-onda_vx747.c
View file

@ -36,9 +36,9 @@ do { \
REG_GPIO_PXPES(2) = 0x001cffff; \
} while (0)
#define SLEEP(x) { register int __i; for(__i=0; __i<x; __i++) asm volatile("nop\n nop\n"); }
#define DELAY SLEEP(700000);
#ifdef USB_BOOT
static void _display_pin_init(void)
{
my__gpio_as_lcd_16bit();
@ -53,6 +53,7 @@ static void _display_pin_init(void)
__gpio_set_pin(PIN_RESET_N);
DELAY;
}
#endif
#define WAIT_ON_SLCD while(REG_SLCD_STATE & SLCD_STATE_BUSY);
#define SLCD_SET_DATA(x) WAIT_ON_SLCD; REG_SLCD_DATA = (x) | SLCD_DATA_RS_DATA;
@ -60,6 +61,7 @@ static void _display_pin_init(void)
#define SLCD_SEND_COMMAND(cmd,val) SLCD_SET_COMMAND(cmd); SLCD_SET_DATA(val);
static void _display_init(void)
{
#ifdef USB_BOOT
SLCD_SEND_COMMAND(REG_SOFT_RESET, SOFT_RESET(1));
SLEEP(700000);
SLCD_SEND_COMMAND(REG_SOFT_RESET, SOFT_RESET(0));
@ -68,15 +70,19 @@ static void _display_init(void)
SLCD_SEND_COMMAND(REG_DRIVER_OUTPUT, 0x100);
SLCD_SEND_COMMAND(REG_LCD_DR_WAVE_CTRL, 0x100);
#endif
#if CONFIG_ORIENTATION == SCREEN_PORTRAIT
SLCD_SEND_COMMAND(REG_ENTRY_MODE, (ENTRY_MODE_BGR | ENTRY_MODE_VID | ENTRY_MODE_HID));
#else
SLCD_SEND_COMMAND(REG_ENTRY_MODE, (ENTRY_MODE_BGR | ENTRY_MODE_VID | ENTRY_MODE_AM));
#endif
#ifdef USB_BOOT
SLCD_SEND_COMMAND(REG_DISP_CTRL2, 0x503);
SLCD_SEND_COMMAND(REG_DISP_CTRL3, 1);
SLCD_SEND_COMMAND(REG_LPCTRL, 0x10);
SLCD_SEND_COMMAND(REG_EXT_DISP_CTRL1, 0);
SLCD_SEND_COMMAND(REG_EXT_DISP_CTRL1, EXT_DISP_CTRL1_RIM(1)); /* 16-bit RGB interface */
SLCD_SEND_COMMAND(REG_EXT_DISP_CTRL2, 0);
SLCD_SEND_COMMAND(REG_DISP_CTRL1, DISP_CTRL1_D(1));
SLCD_SEND_COMMAND(REG_PAN_INTF_CTRL1, 0x12);
@ -138,6 +144,7 @@ static void _display_init(void)
SLCD_SEND_COMMAND(REG_DISP_CTRL1, (DISP_CTRL1_BASEE | DISP_CTRL1_VON |
DISP_CTRL1_GON | DISP_CTRL1_DTE | DISP_CTRL1_D(3)));
SLEEP(3500000);
#endif /* USB_BOOT */
}
static void _display_on(void)
@ -190,7 +197,9 @@ static void _set_lcd_clock(void)
void lcd_init_controller(void)
{
#ifdef USB_BOOT
_display_pin_init();
#endif
_set_lcd_bus();
_set_lcd_clock();
SLEEP(1000);