add Meizu M6SP and M3 ports

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657

firmware/target/arm/s5l8700/meizu-m3/adc-target.h

@@ -0,0 +1,35 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2006 by Barry Wardell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef _ADC_TARGET_H_
+#define _ADC_TARGET_H_
+
+/* only two channels used by the Gigabeat */
+#define NUM_ADC_CHANNELS 1
+
+#define ADC_UNKNOWN_1   0
+#define ADC_UNKNOWN_2   1
+#define ADC_BATTERY     2
+#define ADC_UNKNOWN_4   3
+
+#define ADC_UNREG_POWER ADC_BATTERY /* For compatibility */
+#define ADC_READ_ERROR 0xFFFF
+
+#endif

firmware/target/arm/s5l8700/meizu-m3/backlight-target.h

@@ -0,0 +1,29 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 by Marcoen Hirschberg
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef BACKLIGHT_TARGET_H
+#define BACKLIGHT_TARGET_H
+
+bool _backlight_init(void);
+void _backlight_on(void);
+void _backlight_off(void);
+void _backlight_set_brightness(int brightness);
+
+#endif

firmware/target/arm/s5l8700/meizu-m3/button-target.h

@@ -0,0 +1,54 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2006 by Linus Nielsen Feltzing
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef _BUTTON_TARGET_H_
+#define _BUTTON_TARGET_H_
+
+#include <stdbool.h>
+#include "config.h"
+
+#define HAS_BUTTON_HOLD
+
+bool button_hold(void);
+void button_init_device(void);
+int button_read_device(void);
+
+/* Toshiba Gigabeat specific button codes */
+
+#define BUTTON_LEFT         0x00000001
+#define BUTTON_RIGHT        0x00000002
+#define BUTTON_UP           0x00000004
+#define BUTTON_DOWN         0x00000008
+
+#define BUTTON_SELECT       0x00000010
+
+#define BUTTON_MENU         0x00000020
+#define BUTTON_PLAY         0x00000040
+
+
+#define BUTTON_MAIN (BUTTON_MENU|BUTTON_LEFT|BUTTON_RIGHT\
+                |BUTTON_UP|BUTTON_DOWN|BUTTON_SELECT|BUTTON_PLAY)
+
+#define BUTTON_REMOTE 0
+
+#define POWEROFF_BUTTON BUTTON_PLAY
+#define POWEROFF_COUNT 10
+
+#endif /* _BUTTON_TARGET_H_ */

firmware/target/arm/s5l8700/meizu-m3/lcd-m3.c

@@ -0,0 +1,135 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2002 by Alan Korr
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "config.h"
+
+#include "hwcompat.h"
+#include "kernel.h"
+#include "lcd.h"
+#include "system.h"
+#include "cpu.h"
+
+/*** definitions ***/
+
+
+/** globals **/
+
+static int xoffset; /* needed for flip */
+
+/*** hardware configuration ***/
+
+int lcd_default_contrast(void)
+{
+    return 0x1f;
+}
+
+void lcd_set_contrast(int val)
+{
+}
+
+void lcd_set_invert_display(bool yesno)
+{
+}
+
+/* turn the display upside down (call lcd_update() afterwards) */
+void lcd_set_flip(bool yesno)
+{
+    /* TODO: flip mode isn't working.  The commands in the else part of
+       this function are how the original firmware inits the LCD */
+
+    if (yesno)
+    {
+        xoffset = 132 - LCD_WIDTH; /* 132 colums minus the 128 we have */
+    }
+    else 
+    {
+        xoffset = 0;
+    }
+}
+
+
+/* LCD init */
+void lcd_init_device(void)
+{
+}
+
+/*** Update functions ***/
+
+/* Performance function that works with an external buffer
+   note that by and bheight are in 8-pixel units! */
+void lcd_blit_mono(const unsigned char *data, int x, int by, int width,
+                   int bheight, int stride)
+{
+    /* Copy display bitmap to hardware */
+    while (bheight--)
+    {
+    }
+}
+
+
+/* Performance function that works with an external buffer
+   note that by and bheight are in 8-pixel units! */
+void lcd_blit_grey_phase_blit(unsigned char *values, unsigned char *phases,
+                         int x, int by, int width, int bheight, int stride)
+{
+    (void)values;
+    (void)phases;
+    (void)x;
+    (void)by;
+    (void)width;
+    (void)bheight;
+    (void)stride;
+}
+
+/* Update the display.
+   This must be called after all other LCD functions that change the display. */
+void lcd_update(void) ICODE_ATTR;
+void lcd_update(void)
+{
+    int y;
+
+    /* Copy display bitmap to hardware */
+    for (y = 0; y < LCD_FBHEIGHT; y++)
+    {
+    }
+}
+
+/* Update a fraction of the display. */
+void lcd_update_rect(int, int, int, int) ICODE_ATTR;
+void lcd_update_rect(int x, int y, int width, int height)
+{
+    int ymax;
+
+    /* The Y coordinates have to work on even 8 pixel rows */
+    ymax = (y + height-1) >> 3;
+    y >>= 3;
+
+    if(x + width > LCD_WIDTH)
+        width = LCD_WIDTH - x;
+    if (width <= 0)
+        return; /* nothing left to do, 0 is harmful to lcd_write_data() */
+    if(ymax >= LCD_FBHEIGHT)
+        ymax = LCD_FBHEIGHT-1;
+
+    /* Copy specified rectange bitmap to hardware */
+    for (; y <= ymax; y++)
+    {
+    }
+}

firmware/target/arm/s5l8700/meizu-m6sp/adc-target.h

@@ -0,0 +1,35 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2006 by Barry Wardell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef _ADC_TARGET_H_
+#define _ADC_TARGET_H_
+
+/* only two channels used by the Gigabeat */
+#define NUM_ADC_CHANNELS 1
+
+#define ADC_UNKNOWN_1   0
+#define ADC_UNKNOWN_2   1
+#define ADC_BATTERY     2
+#define ADC_UNKNOWN_4   3
+
+#define ADC_UNREG_POWER ADC_BATTERY /* For compatibility */
+#define ADC_READ_ERROR 0xFFFF
+
+#endif

firmware/target/arm/s5l8700/meizu-m6sp/backlight-target.h

@@ -0,0 +1,29 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 by Marcoen Hirschberg
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef BACKLIGHT_TARGET_H
+#define BACKLIGHT_TARGET_H
+
+bool _backlight_init(void);
+void _backlight_on(void);
+void _backlight_off(void);
+void _backlight_set_brightness(int brightness);
+
+#endif

firmware/target/arm/s5l8700/meizu-m6sp/button-target.h

@@ -0,0 +1,54 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2006 by Linus Nielsen Feltzing
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef _BUTTON_TARGET_H_
+#define _BUTTON_TARGET_H_
+
+#include <stdbool.h>
+#include "config.h"
+
+#define HAS_BUTTON_HOLD
+
+bool button_hold(void);
+void button_init_device(void);
+int button_read_device(void);
+
+/* Toshiba Gigabeat specific button codes */
+
+#define BUTTON_LEFT         0x00000001
+#define BUTTON_RIGHT        0x00000002
+#define BUTTON_UP           0x00000004
+#define BUTTON_DOWN         0x00000008
+
+#define BUTTON_SELECT       0x00000010
+
+#define BUTTON_MENU         0x00000020
+#define BUTTON_PLAY         0x00000040
+
+
+#define BUTTON_MAIN (BUTTON_MENU|BUTTON_LEFT|BUTTON_RIGHT\
+                |BUTTON_UP|BUTTON_DOWN|BUTTON_SELECT|BUTTON_PLAY)
+
+#define BUTTON_REMOTE 0
+
+#define POWEROFF_BUTTON BUTTON_PLAY
+#define POWEROFF_COUNT 10
+
+#endif /* _BUTTON_TARGET_H_ */

firmware/target/arm/s5l8700/meizu-m6sp/lcd-m6sp.c

@@ -0,0 +1,135 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2002 by Alan Korr
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "config.h"
+
+#include "hwcompat.h"
+#include "kernel.h"
+#include "lcd.h"
+#include "system.h"
+#include "cpu.h"
+
+/*** definitions ***/
+
+
+/** globals **/
+
+static int xoffset; /* needed for flip */
+
+/*** hardware configuration ***/
+
+int lcd_default_contrast(void)
+{
+    return 0x1f;
+}
+
+void lcd_set_contrast(int val)
+{
+}
+
+void lcd_set_invert_display(bool yesno)
+{
+}
+
+/* turn the display upside down (call lcd_update() afterwards) */
+void lcd_set_flip(bool yesno)
+{
+    /* TODO: flip mode isn't working.  The commands in the else part of
+       this function are how the original firmware inits the LCD */
+
+    if (yesno)
+    {
+        xoffset = 132 - LCD_WIDTH; /* 132 colums minus the 128 we have */
+    }
+    else 
+    {
+        xoffset = 0;
+    }
+}
+
+
+/* LCD init */
+void lcd_init_device(void)
+{
+}
+
+/*** Update functions ***/
+
+/* Performance function that works with an external buffer
+   note that by and bheight are in 8-pixel units! */
+void lcd_blit_mono(const unsigned char *data, int x, int by, int width,
+                   int bheight, int stride)
+{
+    /* Copy display bitmap to hardware */
+    while (bheight--)
+    {
+    }
+}
+
+
+/* Performance function that works with an external buffer
+   note that by and bheight are in 8-pixel units! */
+void lcd_blit_grey_phase_blit(unsigned char *values, unsigned char *phases,
+                         int x, int by, int width, int bheight, int stride)
+{
+    (void)values;
+    (void)phases;
+    (void)x;
+    (void)by;
+    (void)width;
+    (void)bheight;
+    (void)stride;
+}
+
+/* Update the display.
+   This must be called after all other LCD functions that change the display. */
+void lcd_update(void) ICODE_ATTR;
+void lcd_update(void)
+{
+    int y;
+
+    /* Copy display bitmap to hardware */
+    for (y = 0; y < LCD_FBHEIGHT; y++)
+    {
+    }
+}
+
+/* Update a fraction of the display. */
+void lcd_update_rect(int, int, int, int) ICODE_ATTR;
+void lcd_update_rect(int x, int y, int width, int height)
+{
+    int ymax;
+
+    /* The Y coordinates have to work on even 8 pixel rows */
+    ymax = (y + height-1) >> 3;
+    y >>= 3;
+
+    if(x + width > LCD_WIDTH)
+        width = LCD_WIDTH - x;
+    if (width <= 0)
+        return; /* nothing left to do, 0 is harmful to lcd_write_data() */
+    if(ymax >= LCD_FBHEIGHT)
+        ymax = LCD_FBHEIGHT-1;
+
+    /* Copy specified rectange bitmap to hardware */
+    for (; y <= ymax; y++)
+    {
+    }
+}