iAudio, iRiver: As both platforms use the same i2c interface i have renamed i2c-h100.c/h to i2c-coldfire.c/h. Also i have changed some stuff in config.h and config-xx.h. Hope everybody agrees with this patch, else we can unroll and improve it.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7271 a1c6a512-1295-4272-9138-f99709370657

firmware/export/i2c-coldfire.h

@@ -0,0 +1,64 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2002 by Linus Nielsen Feltzing
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/*
+ *  Driver for MCF52xx's I2C interface
+ *  2005-02-17 hubble@mochine.com
+ *
+ */
+ 
+#ifndef _I2C_COLDFIRE_H
+#define _I2C_COLDFIRE_H
+
+void i2c_init(void);
+int i2c_write(int device, unsigned char *buf, int count);
+void i2c_close(void);
+
+
+#define MAX_LOOP    0x100     /* TODO: select a better value */
+
+/* PLLCR control */
+#define QSPISEL (1 << 11)		/* Selects QSPI or I2C interface */
+
+/* Offsets to I2C registers from base address */
+#define O_MADR	0x00            /* Slave Address        */
+#define O_MFDR	0x04            /* Frequency divider    */
+#define O_MBCR	0x08            /* Control register     */
+#define O_MBSR	0x0c            /* Status register      */
+#define O_MBDR	0x10            /* Data register        */
+
+/* MBSR - Status register */
+#define ICF     (1 << 7)        /* Transfer Complete	*/
+#define IAAS    (1 << 6)        /* Addressed As Alave	*/
+#define IBB     (1 << 5)        /* Bus Busy		        */
+#define IAL     (1 << 4)        /* Arbitration Lost	    */
+#define SRW     (1 << 2)        /* Slave R/W		    */
+#define IFF     (1 << 1)        /* I2C Interrupt	    */
+#define RXAK    (1 << 0)        /* No Ack bit		    */
+
+/* MBCR - Control register */
+#define IEN     (1 << 7)		/* I2C Enable		    */
+#define IIEN    (1 << 6)		/* Interrupt Enable	    */
+#define MSTA    (1 << 5)		/* Master/Slave select	*/
+#define MTX     (1 << 4)		/* Transmit/Receive	    */
+#define TXAK    (1 << 3)		/* Transfer ACK		    */
+#define RSTA    (1 << 2)		/* Restart..		    */
+
+
+#endif