iAudio, iRiver: As both platforms use the same i2c interface i have renamed i2c-h100.c/h to i2c-coldfire.c/h. Also i have changed some stuff in config.h and config-xx.h. Hope everybody agrees with this patch, else we can unroll and improve it.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7271 a1c6a512-1295-4272-9138-f99709370657

firmware/drivers/i2c-coldfire.c

@@ -0,0 +1,174 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2005 by Andy Young
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "cpu.h"
+#include "kernel.h"
+#include "debug.h"
+#include "system.h"
+#include "i2c-coldfire.h"
+
+#define I2C_DEVICE_1    ((volatile unsigned char *)&MADR)
+#define I2C_DEVICE_2    ((volatile unsigned char *)&MADR2)
+
+/* Local functions definitions */
+
+static int i2c_write_byte(int device, unsigned char data);
+static int i2c_gen_start(int device);
+static void i2c_gen_stop(int device);
+static volatile unsigned char *i2c_get_addr(int device);
+
+/* Public functions */
+
+void i2c_init(void)
+{
+#if (CONFIG_KEYPAD == IRIVER_H100_PAD) || (CONFIG_KEYPAD == IRIVER_H300_PAD)
+    /* Audio Codec */
+    MADR = 0x6c; /* iRiver firmware uses this addr */
+    MBDR = 0;    /* iRiver firmware does this */
+    MBCR = IEN;  /* Enable interface */
+
+#if 0
+    /* FM Tuner */
+    MADR2 = 0x6c;
+    MBDR2 = 0;
+    MBCR2 = IEN;
+#endif
+
+#endif
+}
+
+void i2c_close(void)
+{
+    MBCR  = 0;
+    MBCR2 = 0;
+}
+
+/**
+ * Writes bytes to the selected device.
+ *
+ * Use device=1 for bus 1 at 0x40000280
+ * Use device=2 for bus 2 at 0x80000440
+ * 
+ * Returns number of bytes successfully send or -1 if START failed
+ */
+int i2c_write(int device, unsigned char *buf, int count)
+{
+    int i;
+    int rc;
+
+    rc = i2c_gen_start(device);
+    if (rc < 0)
+    {
+        DEBUGF("i2c: gen_start failed (d=%d)", device);
+        return rc*10 - 1;
+    }
+
+    for (i=0; i<count; i++)
+    {
+        rc = i2c_write_byte(device, buf[i]);
+        if (rc < 0)
+        {
+            DEBUGF("i2c: write failed at (d=%d,i=%d)", device, i);
+            return rc*10 - 2;
+        }
+    }
+
+    i2c_gen_stop(device);
+
+    return count;
+}
+
+/* Write a byte to the interface, returns 0 on success, -1 otherwise. */
+int i2c_write_byte(int device, unsigned char data)
+{
+    volatile unsigned char *regs = i2c_get_addr(device);
+
+    long count = 0;
+
+    regs[O_MBDR] = data;                /* Write data byte */   
+
+    /* Wait for bus busy */
+    while (!(regs[O_MBSR] & IBB) && count < MAX_LOOP)
+    {
+        yield();
+        count++;
+    }
+
+    if (count >= MAX_LOOP)
+        return -1;
+
+    count = 0;
+
+    /* Wait for interrupt flag */
+    while (!(regs[O_MBSR] & IFF) && count < MAX_LOOP)
+    {
+        yield();
+        count++;
+    }
+
+    if (count >= MAX_LOOP)
+        return -2;
+
+    regs[O_MBSR] &= ~IFF;       /* Clear interrupt flag  */
+
+    if (!(regs[O_MBSR] & ICF))  /* Check that transfer is complete */
+        return -3;
+
+    if (regs[O_MBSR] & RXAK)    /* Check that the byte has been ACKed */
+        return -4;
+
+    return 0;
+}
+
+
+/* Returns 0 on success, -1 on failure */
+int i2c_gen_start(int device)
+{
+    volatile unsigned char *regs = i2c_get_addr(device);
+    long count = 0;
+
+    /* Wait for bus to become free */
+    while ((regs[O_MBSR] & IBB) && (count < MAX_LOOP))
+    {
+        yield();
+        count++;
+    }
+
+    if (count >= MAX_LOOP)
+        return -1;
+
+    regs[O_MBCR] |= MSTA | MTX;         /* Generate START */
+
+    return 0;
+}  
+
+void i2c_gen_stop(int device)
+{
+    volatile unsigned char *regs = i2c_get_addr(device);
+    regs[O_MBCR] &= ~MSTA;          /* Clear MSTA to generate STOP */
+}
+
+
+volatile unsigned char *i2c_get_addr(int device)
+{
+    if (device == 1)
+        return I2C_DEVICE_1;
+
+    return I2C_DEVICE_2;
+}