devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Finally get packed samples to work in a nice way on H10 in IIS mode. Add some more register defs.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15026 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Michael Sevakis 2007-10-07 20:14:32 +00:00
parent 1de497228a
commit 4512f1a14f
3 changed files with 22 additions and 14 deletions
Download patch file Download diff file Expand all files Collapse all files

7
firmware/export/pp5020.h
View file

@ -307,8 +307,11 @@
#define INIT_USB 0x80000000
/* IIS */
#define IISDIV (*(volatile unsigned long*)(0x60006080))
#define IISCONFIG (*(volatile unsigned long*)(0x70002800))
#define IISCLK (*(volatile unsigned long*)(0x70002808))
#define IISFIFO_CFG (*(volatile unsigned long*)(0x7000280c))
#define IISFIFO_WR (*(volatile unsigned long*)(0x70002840))
#define IISFIFO_WRH (*(volatile unsigned short*)(0x70002840))
@ -362,6 +365,10 @@
#define IIS_FIFO_FORMAT_LE32 (0x3 << 4)
/* 16bit-MSB-little endian */
#define IIS_FIFO_FORMAT_LE16 (0x4 << 4)
#define IIS_FIFO_FORMAT_5 (0x5 << 4)
#define IIS_FIFO_FORMAT_6 (0x6 << 4)
/* A second one like IIS_FIFO_FORMAT_LE16? PP5020 only? */
#define IIS_FIFO_FORMAT_LE16_2 (0x7 << 4)
/* FIFO formats 0x5 and above seem equivalent to 0x4 ?? */

10
firmware/target/arm/i2s-pp.c
View file

@ -57,9 +57,9 @@ void i2s_reset(void)
IISCONFIG &= ~IIS_RESET;
/* BIT.FORMAT */
IISCONFIG = ((IISCONFIG & ~IIS_SIZE_MASK) | IIS_SIZE_16BIT);
/* BIT.SIZE */
IISCONFIG = ((IISCONFIG & ~IIS_FORMAT_MASK) | IIS_FORMAT_IIS);
/* BIT.SIZE */
IISCONFIG = ((IISCONFIG & ~IIS_SIZE_MASK) | IIS_SIZE_16BIT);
/* FIFO.FORMAT */
/* If BIT.SIZE < FIFO.FORMAT low bits will be 0 */
@ -67,11 +67,11 @@ void i2s_reset(void)
/* AS3514 can only operate as I2S Slave */
IISCONFIG |= IIS_MASTER;
/* Set I2S to 44.1kHz */
outl((inl(0x70002808) & ~(0x1ff)) | 33, 0x70002808);
outl(7, 0x60006080);
IISCLK = (IISCLK & ~0x1ff) | 33;
IISDIV = 7;
IISCONFIG = ((IISCONFIG & ~IIS_FIFO_FORMAT_MASK) | IIS_FIFO_FORMAT_LE16);
#elif defined (IRIVER_H10) || defined (IRIVER_H10_5GB)
IISCONFIG = ((IISCONFIG & ~IIS_FIFO_FORMAT_MASK) | IIS_FIFO_FORMAT_LE_HALFWORD);
IISCONFIG = ((IISCONFIG & ~IIS_FIFO_FORMAT_MASK) | IIS_FIFO_FORMAT_LE16_2);
#else
IISCONFIG = ((IISCONFIG & ~IIS_FIFO_FORMAT_MASK) | IIS_FIFO_FORMAT_LE32);
#endif

9
firmware/target/arm/pcm-pp.c
View file

@ -29,11 +29,12 @@
of working settings. DMA-compatible settings should be found for here, i2s,
and codec setup using "arithmetic" the hardware supports like halfword
swapping. Try to use 32-bit packed in IIS modes if possible. */
#if defined(SANSA_C200) || defined(SANSA_E200)
#if defined(SANSA_C200) || defined(SANSA_E200) \
|| defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
/* 16-bit, L-R packed into 32 bits with left in the least significant halfword */
#define SAMPLE_SIZE 16
#define TRANSFER_SIZE 32
#elif defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
#elif 0
/* 16-bit, one left 16-bit sample followed by one right 16-bit sample */
#define SAMPLE_SIZE 16
#define TRANSFER_SIZE 16
@ -294,8 +295,8 @@ static void play_stop_pcm(void)
void pcm_play_dma_start(const void *addr, size_t size)
{
dma_play_data.p = (void *)addr;
dma_play_data.size = size;
dma_play_data.p = (void *)(((uintptr_t)addr + 2) & ~3);
dma_play_data.size = (size & ~3);
#if NUM_CORES > 1
/* This will become more important later - and different ! */