* Add support for Onda VX747+ (FS#9674 by Olivier Barbut)

* Fix Onda VX767 support
 * Small cleanup


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19481 a1c6a512-1295-4272-9138-f99709370657

bootloader/SOURCES

@@ -40,7 +40,7 @@ meizu_m6sl.c
 meizu_m6sp.c
 #elif defined(MEIZU_M3)
 meizu_m3.c
-#elif defined(ONDA_VX747) || defined(ONDA_VX767)
+#elif defined(ONDA_VX747) || defined(ONDA_VX747P) || defined(ONDA_VX767)
 ondavx747.c
 #elif defined(CREATIVE_ZVx)
 creativezvm.c

bootloader/ondavx747.c

@@ -21,11 +21,15 @@
 
 #include <stdio.h>
 #include <stdarg.h>
+#include <string.h>
 #include "config.h"
 #include "jz4740.h"
 #include "backlight.h"
 #include "font.h"
 #include "lcd.h"
+#include "ata.h"
+#include "usb.h"
+#include "storage.h"
 #include "system.h"
 #include "button.h"
 #include "timefuncs.h"
@@ -33,14 +37,9 @@
 #include "common.h"
 #include "mipsregs.h"
 
-static void audiotest(void)
+#ifdef ONDA_VX747P
-{
+ #define ONDA_VX747
-    __i2s_internal_codec();
+#endif
-    __aic_enable();
-    __aic_reset();
-    __aic_select_i2s();
-    __aic_enable_loopback();
-}
 
 int main(void)
 {
@@ -54,12 +53,16 @@ int main(void)
     
     backlight_init();
     
+#if 0 /* Enable this when multi storage works */
     storage_init();
+#else
+    ata_init();
+#endif
 
     int touch, btn;
     char datetime[30];
     reset_screen();
-    printf("Rockbox bootloader v0.000001");
+    printf("Rockbox bootloader v0.0001");
     printf("REG_EMC_SACR0: 0x%x", REG_EMC_SACR0);
     printf("REG_EMC_SACR1: 0x%x", REG_EMC_SACR1);
     printf("REG_EMC_SACR2: 0x%x", REG_EMC_SACR2);
@@ -85,46 +88,20 @@ int main(void)
     if(read_c0_config1() & (1 << 6)) printf(" * CP2 available");
     printf("C0_STATUS: 0x%x", read_c0_status());
     
-#if 0
+    lcd_puts_scroll(0, 25, "This is a very very long scrolling line.... VERY LONG VERY LONG VERY LONG VERY LONG VERY LONG VERY LONG!!!!!");
-    unsigned char testdata[4096];
+    
-    char msg[30];
-    int j = 1;
-    while(1)
-    {
-        memset(testdata, 0, 4096);
-        reset_screen();
-        jz_nand_read(0, j, &testdata);
-        printf("Page %d", j);
-        int i;
-        for(i=0; i<768; i+=16)
-        {
-            snprintf(msg, 30, "%02x%02x%02x%02x%02x%02x%02x%02x %02x%02x%02x%02x%02x%02x%02x%02x",
-            testdata[i], testdata[i+1], testdata[i+2], testdata[i+3], testdata[i+4], testdata[i+5], testdata[i+6], testdata[i+7],
-            testdata[i+8], testdata[i+9], testdata[i+10], testdata[i+11], testdata[i+12], testdata[i+13], testdata[i+14], testdata[i+15]
-            );
-            printf(msg);
-        }
-        while(!((btn = button_read_device(&touch)) & (BUTTON_VOL_UP|BUTTON_VOL_DOWN)));
-        if(btn & BUTTON_VOL_UP)
-            j++;
-        if(btn & BUTTON_VOL_DOWN)
-            j--;
-        if(j<0)
-            j = 0;
-    }
-#endif
     while(1)
     {
 #ifdef ONDA_VX747
 #if 1
         btn = button_get(false);
         touch = button_get_data();
-#else
+#else /* button_get() has performance issues */
         btn = button_read_device(&touch);
 #endif
 #else
         btn = button_read_device();
-#endif
+#endif /* ONDA_VX747 */
 #define KNOP(x,y)     lcd_set_foreground(LCD_BLACK); \
                       if(btn & x) \
                         lcd_set_foreground(LCD_WHITE); \

docs/CREDITS

@@ -439,6 +439,7 @@ Anton Veretenenko
 Vicente Ibarra
 Rui Araújo
 Brian Cloutier
+Olivier Barbut
 
 
 The libmad team

firmware/SOURCES

@@ -1215,7 +1215,7 @@ target/mips/ingenic_jz47xx/usb-jz4740.c
 drivers/nand_id.c
 #endif
 
-#ifdef ONDA_VX747
+#if defined(ONDA_VX747) || defined(ONDA_VX747P)
 target/mips/ingenic_jz47xx/onda_vx747/backlight-onda_vx747.c
 target/mips/ingenic_jz47xx/onda_vx747/lcd-onda_vx747.c
 target/mips/ingenic_jz47xx/onda_vx747/sadc-onda_vx747.c

firmware/export/config-ondavx747.h

@@ -161,6 +161,4 @@
 #define USB_VENDOR_ID 0x041e 
 #define USB_PRODUCT_ID 0x4133
 
-#include <stdbool.h> /* HACKY */
-
 #endif

firmware/export/config-ondavx747p.h

@@ -0,0 +1,164 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 by Olivier Barbut
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/*
+ * This config file is for the Onda VX747+
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define CONFIG_SDRAM_START 0x80004000
+
+#define ONDA_VX747P 1
+
+#define MODEL_NAME  "Onda VX747+"
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 44
+
+//#define HAVE_ATA_SD
+//#define HAVE_HOTSWAP
+
+//#define CONFIG_STORAGE (STORAGE_NAND | STORAGE_SD)
+#define CONFIG_STORAGE STORAGE_RAMDISK /* Multivolume currently handled at firmware/target/ level */
+
+#define CONFIG_NAND NAND_CC
+
+#define HAVE_MULTIVOLUME
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* LCD dimensions */
+#define CONFIG_LCD LCD_ONDAVX747
+
+#define LCD_WIDTH  240
+#define LCD_HEIGHT 400
+
+#define LCD_DEPTH  16   /* 16bit colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+/* Define this if your LCD can be enabled/disabled */
+#define HAVE_LCD_ENABLE
+
+#define CONFIG_KEYPAD ONDAVX747_PAD
+#define HAVE_TOUCHSCREEN
+#define HAVE_BUTTON_DATA
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_JZ47XX
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING          100
+#define MAX_BRIGHTNESS_SETTING          300
+#define DEFAULT_BRIGHTNESS_SETTING      300 /* "full brightness" */
+#define DEFAULT_DIMNESS_SETTING         100 /* "most dim" */
+
+/* Define this if you have a software controlled poweroff */
+//#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x100000
+
+/* Define this if you have the */
+//#define HAVE_INGENIC_CODEC
+
+#define CONFIG_I2C I2C_JZ47XX
+
+/* TLV320 has no tone controls, so we use the software ones */
+//#define HAVE_SW_TONE_CONTROLS
+
+/*#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
+    SAMPR_CAP_11)*/
+
+#define BATTERY_CAPACITY_DEFAULT 1250 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 500        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 2500        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 100         /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+/* Hardware controlled charging with monitoring */
+//#define CONFIG_CHARGING CHARGING_MONITOR
+
+#ifndef SIMULATOR
+
+/* Define this if you have a Ingenic JZ4732 */
+#define CONFIG_CPU JZ4732
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 3686400
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* define this if the backlight can be set to a brightness */
+#define __BACKLIGHT_INIT
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* Define this if you have adjustable CPU frequency */
+/* #define HAVE_ADJUSTABLE_CPU_FREQ */
+
+#define BOOTFILE_EXT "vx747p"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define CONFIG_USBOTG USBOTG_JZ4740
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x041e 
+#define USB_PRODUCT_ID 0x4133
+
+#endif

firmware/export/config-ondavx767.h

@@ -33,11 +33,13 @@
 /* For Rolo and boot loader */
 #define MODEL_NUMBER 36
 
-/* define this if you use an ATA controller */
+//#define HAVE_ATA_SD
-//#define CONFIG_STORAGE STORAGE_ATA
+//#define HAVE_HOTSWAP
 
-#define HAVE_ATA_SD
+//#define CONFIG_STORAGE (STORAGE_NAND | STORAGE_SD)
-#define HAVE_HOTSWAP
+#define CONFIG_STORAGE STORAGE_RAMDISK /* Multivolume currently handled at firmware/target/ level */
+
+#define CONFIG_NAND NAND_CC
 
 #define HAVE_MULTIVOLUME
 
@@ -152,11 +154,9 @@
 #define BOOTFILE "rockbox." BOOTFILE_EXT
 #define BOOTDIR "/.rockbox"
 
-/*#define CONFIG_USBOTG	USBOTG_INGENIC
+#define CONFIG_USBOTG	USBOTG_JZ4740
 #define HAVE_USBSTACK
 #define USB_VENDOR_ID 0x041e 
-#define USB_PRODUCT_ID 0x4133*/
+#define USB_PRODUCT_ID 0x4133
-
-#include <stdbool.h> /* HACKY */
 
 #endif

firmware/export/config.h

@@ -316,6 +316,8 @@
 #include "config-meizu-m3.h"
 #elif defined(ONDA_VX747)
 #include "config-ondavx747.h"
+#elif defined(ONDA_VX747P)
+#include "config-ondavx747p.h"
 #elif defined(ONDA_VX767)
 #include "config-ondavx767.h"
 #elif defined(SANSA_CLIP)
@@ -634,4 +636,8 @@
 #define STORAGE_GET_INFO
 #endif
 
+#ifdef CPU_MIPS
+#include <stdbool.h> /* MIPS GCC fix? */
+#endif
+
 #endif /* __CONFIG_H__ */

firmware/target/mips/ingenic_jz47xx/onda_vx747/sadc-onda_vx747.c

@@ -27,11 +27,22 @@
 #include "powermgmt.h"
 #include "kernel.h"
 
+#ifdef ONDA_VX747
 #define BTN_OFF      (1 << 29)
 #define BTN_VOL_DOWN (1 << 27)
 #define BTN_HOLD     (1 << 16)
 #define BTN_MENU     (1 << 1)
 #define BTN_VOL_UP   (1 << 0)
+#elif defined(ONDA_VX747P)
+#define BTN_OFF      (1 << 29)
+#define BTN_VOL_DOWN (1 << 27)
+#define BTN_HOLD     (1 << 22)  /* on REG_GPIO_PXPIN(2) */
+#define BTN_MENU     (1 << 20)
+#define BTN_VOL_UP   (1 << 19)
+#else
+#error No buttons defined!
+#endif
+
 #define BTN_MASK     (BTN_OFF | BTN_VOL_DOWN | \
                       BTN_MENU | BTN_VOL_UP)
 
@@ -130,11 +141,19 @@ void button_init_device(void)
     REG_SADC_CTRL = (~(SADC_CTRL_PENDM | SADC_CTRL_PENUM | SADC_CTRL_TSRDYM | SADC_CTRL_PBATRDYM));
     REG_SADC_ENA = (SADC_ENA_TSEN | SADC_ENA_PBATEN);
     
+#ifdef ONDA_VX747
     __gpio_as_input(32*3 + 29);
     __gpio_as_input(32*3 + 27);
     __gpio_as_input(32*3 + 16);
     __gpio_as_input(32*3 + 1);
     __gpio_as_input(32*3 + 0);
+#elif defined(ONDA_VX747P)
+    __gpio_as_input(32*3 + 29);
+    __gpio_as_input(32*3 + 27);
+    __gpio_as_input(32*3 + 20);
+    __gpio_as_input(32*3 + 19);
+    __gpio_as_input(32*2 + 22);
+#endif
     
     mutex_init(&battery_mtx);
 }
@@ -173,7 +192,13 @@ int button_read_device(int *data)
     int ret = 0, tmp;
 
     /* Filter button events out if HOLD button is pressed at firmware/ level */
-    if((~REG_GPIO_PXPIN(3)) & BTN_HOLD)
+    if(
+#ifdef ONDA_VX747
+    (~REG_GPIO_PXPIN(3)) & BTN_HOLD
+#elif defined(ONDA_VX747P)
+    (~REG_GPIO_PXPIN(2)) & BTN_HOLD
+#endif
+    )
         return 0;
 
     tmp = (~REG_GPIO_PXPIN(3)) & BTN_MASK;

firmware/target/mips/ingenic_jz47xx/onda_vx767/usb-target.h

@@ -24,23 +24,19 @@
 
 #include "config.h"
 
-#define __gpio_as_usb_detect()            \
-do {                                      \
-    REG_GPIO_PXFUNS(3) = 0x10000000;      \
-    REG_GPIO_PXSELS(3) = 0x10000000;      \
-    REG_GPIO_PXPES(3) = 0x10000000;       \
-} while (0)
-
 #define GPIO_UDC_DETE      (32 * 3 + 28)
 #define IRQ_GPIO_UDC_DETE  (IRQ_GPIO_0 + GPIO_UDC_DETE)
 
-static inline void usb_init_gpio(void)
+#define USB_INIT_GPIO()              \
-{
+{                                    \
-    __gpio_as_usb_detect();
+    REG_GPIO_PXFUNS(3) = 0x10000000; \
-    system_enable_irq(IRQ_UDC);
+    REG_GPIO_PXSELS(3) = 0x10000000; \
-    __gpio_as_input(GPIO_UDC_DETE);
+    REG_GPIO_PXPES(3)  = 0x10000000; \
+    __gpio_as_input(GPIO_UDC_DETE);  \
 }
 
+#define USB_DRV_CONNECTED()    (__gpio_get_pin(GPIO_UDC_DETE) == 1)
+
 int usb_detect(void);
 void usb_init_device(void);
 bool usb_drv_connected(void);

tools/configure

@@ -711,7 +711,7 @@ cat <<EOF
  ==Onda==                                        80) DAX 1GB MP3/DAB
  120) VX747               ==Meizu==
  121) VX767               110) M6SL
-                          111) M6SP
+ 122) VX747+              111) M6SP
                           112) M3
 
 EOF
@@ -1938,6 +1938,29 @@ fi
     t_manufacturer="ingenic_jz47xx"
     t_model="onda_vx767"
     ;;
+    
+    122|ondavx747p)
+    target_id=54
+    modelname="ondavx747p"
+    target="-DONDA_VX747P"
+    memory=16 #FIXME
+    mipselcc
+    tool="cp"
+    bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
+    bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
+    output="rockbox.vx747p"
+    appextra="recorder:gui"
+    plugins="no" #FIXME
+    swcodec="yes"
+    toolset=$genericbitmaptools
+    boottool="cp"
+    bootoutput="rockboot.vx747p"
+    # architecture, manufacturer and model for the target-tree build
+    t_cpu="mips"
+    t_manufacturer="ingenic_jz47xx"
+    t_model="onda_vx747"
+    ;;
+
    *)
     echo "Please select a supported target platform!"
     exit 7