devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Commit fs#9959 by Jack Halpin. Removes delays from the Sansa e200v2 button driver and cleans up the code.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20676 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Michael Giacomelli 2009-04-10 15:19:59 +00:00
parent a137733d10
commit 30b888cb58
2 changed files with 30 additions and 31 deletions
Download patch file Download diff file Expand all files Collapse all files

1
docs/CREDITS
View file

@ -458,6 +458,7 @@ Johannes Linke
Michaël Burtin
Sasha Khamkov
Kai Posadowsky
Jack Halpin
The libmad team
The wavpack team

24
firmware/target/arm/as3525/sansa-e200v2/button-e200v2.c
View file

@ -83,7 +83,7 @@ void clickwheel(unsigned int wheel_value)
if (btn != BUTTON_NONE)
{
int repeat = 1; /* assume repeat */
unsigned long usec = TIMER1_VALUE; /* WAG!!! and it works!!*/
unsigned long usec = TIMER1_VALUE;
unsigned v = (usec - last_wheel_usec) & 0x7fffffff;
v = (v>0) ? 1000000 / v : 0; /* clicks/sec = 1000000 * +clicks/usec */
@ -173,7 +173,6 @@ void clickwheel(unsigned int wheel_value)
wheel_delta = 0x7f;
}
}
last_wheel_usec = usec;
}
old_wheel_value = wheel_value;
@ -188,21 +187,19 @@ static short read_dbop(void)
/* Set up dbop for input */
while (!(DBOP_STAT & (1<<10))); /* Wait for fifo to empty */
DBOP_CTRL |= (1<<19);
DBOP_CTRL &= ~(1<<16); /* disable output */
DBOP_TIMPOL_01 = 0xe167e167; //11100001011001111110000101100111
DBOP_TIMPOL_23 = 0xe167006e; //11100001011001110000000001101110
DBOP_CTRL &= ~(1<<16); /* disable output (1:write enabled) */
DBOP_TIMPOL_01 = 0xe167e167; /* Set Timing & Polarity regs 0 & 1 */
DBOP_TIMPOL_23 = 0xe167006e; /* Set Timing & Polarity regs 2 & 3 */
DBOP_CTRL |= (1<<15); /* start read */
while (!(DBOP_STAT & (1<<16))); /* wait for valid data */
int delay = 50;
while(delay--); /* small delay to set up read */
_dbop_din = DBOP_DIN; /* now read dbop & store info*/
_dbop_din = DBOP_DIN; /* Read dbop data*/
DBOP_TIMPOL_01 = 0x6e167;
DBOP_TIMPOL_23 = 0xa167e06f;
DBOP_CTRL |= (1<<16);
/* Reset dbop for output */
DBOP_TIMPOL_01 = 0x6e167; /* Set Timing & Polarity regs 0 & 1 */
DBOP_TIMPOL_23 = 0xa167e06f; /* Set Timing & Polarity regs 2 & 3 */
DBOP_CTRL |= (1<<16); /* Enable output (0:write disable) */
DBOP_CTRL &= ~(1<<19);
return _dbop_din;
@ -235,6 +232,7 @@ int button_read_device(void)
if (dbop & (1<<8))
btn |= BUTTON_POWER;
if (!(dbop & (1<<15)))
btn |= BUTTON_REC;
@ -256,7 +254,7 @@ int button_read_device(void)
GPIOC_DIR &= ~(1<<2|1<<3|1<<4|1<<5|1<<6);
int delay = 50; /* small delay needed to read buttons correctly */
int delay = 2; /* small delay needed to read buttons correctly */
while(delay--);
/* direct GPIO connections */