devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Patch #1346455 by Jens Arnold - SDRAM init fixes

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7974 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Linus Nielsen Feltzing 2005-11-19 01:10:54 +00:00
parent b4984492ef
commit 30393c2c6a
1 changed files with 19 additions and 21 deletions
Download patch file Download diff file Expand all files Collapse all files

36
firmware/crt0.S
View file

@ -318,7 +318,7 @@ irq_handler:
move.l (%a2),%d0 move.l (%a2),%d0
move.l #0xc0015a17,%d1 move.l #0xc0015a17,%d1
cmp.l %d0,%d1 cmp.l %d0,%d1
bne .nocookie bne.b .nocookie
/* Clear the cookie again */ /* Clear the cookie again */
clr.l (%a2) clr.l (%a2)
jmp 8 jmp 8
@ -330,7 +330,7 @@ irq_handler:
/* Set up the DRAM controller. The refresh is based on the 11.2896MHz /* Set up the DRAM controller. The refresh is based on the 11.2896MHz
clock (5.6448MHz bus frequency). We haven't yet started the PLL */ clock (5.6448MHz bus frequency). We haven't yet started the PLL */
#if MEM < 32 #if MEM < 32
move.w #0x8204,%d0 /* DCR - Synchronous, 80 cycle refresh */ move.w #0x8004,%d0 /* DCR - Synchronous, 80 cycle refresh */
#else #else
move.w #0x8001,%d0 /* DCR - Synchronous, 32 cycle refresh */ move.w #0x8001,%d0 /* DCR - Synchronous, 32 cycle refresh */
#endif #endif
@ -345,46 +345,44 @@ irq_handler:
use a 64M mask. use a 64M mask.
*/ */
#if MEM < 32 #if MEM < 32
move.l #0x31002320,%d0 /* DACR0 - Base 0x31000000, Banks on 21 and up, move.l #0x31002324,%d0 /* DACR0 - Base 0x31000000, Banks on 21 and up,
CAS latency 1, No refresh yet */ CAS latency 1, Page mode, No refresh yet */
move.l %d0,(0x108,%a0) move.l %d0,(0x108,%a0)
move.l #0x00fc0001,%d0 /* Size: 16M */ move.l #0x00fc0001,%d0 /* Size: 16M */
move.l %d0,(0x10c,%a0) /* DMR0 - 32Mb */ move.l %d0,(0x10c,%a0) /* DMR0 - 32Mb */
#else #else
move.l #0x31002520,%d0 /* DACR0 - Base 0x31000000, Banks on 23 and up, move.l #0x31002524,%d0 /* DACR0 - Base 0x31000000, Banks on 23 and up,
CAS latency 1, No refresh yet */ CAS latency 1, Page mode, No refresh yet */
move.l %d0,(0x108,%a0) move.l %d0,(0x108,%a0)
move.l #0x03fc0001,%d0 /* Size: 64M because of workaround above */ move.l #0x03fc0001,%d0 /* Size: 64M because of workaround above */
move.l %d0,(0x10c,%a0) /* DMR0 - 32Mb */ move.l %d0,(0x10c,%a0) /* DMR0 - 32Mb */
#endif #endif
/* Precharge */ /* Precharge */
move.l #8,%d0 moveq.l #8,%d0
or.l %d0,(0x108,%a0) /* DACR0[IP] = 1, next access will issue a or.l %d0,(0x108,%a0) /* DACR0[IP] = 1, next access will issue a
Precharge command */ Precharge command */
move.l #0xabcd1234,%d0 move.l #0xabcd1234,%d0
move.l %d0,0x31000000 /* Issue precharge command */ move.l %d0,0x31000000 /* Issue precharge command */
move.l #0x8000,%d0
or.l %d0,(0x108,%a0) /* Enable refresh */
/* Let it refresh */ /* Let it refresh */
move.l #1000,%d0 move.l #500,%d0
.delayloop: .delayloop:
subq.l #1,%d0 subq.l #1,%d0
bne .delayloop bne.b .delayloop
/* Refresh */
move.l #0x8000,%d0
or.l %d0,(0x108,%a0) /* Enable refresh */
/* Mode Register init */ /* Mode Register init */
move.l #0x40,%d0 /* DACR0[IMRS] = 1, next access will set the moveq.l #0x40,%d0 /* DACR0[IMRS] = 1, next access will set the
Mode Register */ Mode Register */
or.l %d0,(0x108,%a0) or.l %d0,(0x108,%a0)
move.l #0xabcd1234,%d0 move.l #0xabcd1234,%d0
move.l %d0,0x31000800 /* A12=1 means CASL=1 (a0 is not connected) */ move.l %d0,0x31000800 /* A12=1 means CASL=1 (a0 is not connected) */
move.l #0xffffffbf,%d0 /* DACR0[IMRS] gets deactivated by the SDRAM controller */
and.l %d0,(0x108,%a0) /* Back to normal, the DRAM is now ready */
#endif /* BOOTLOADER */ #endif /* BOOTLOADER */
/* Invalicate cache */ /* Invalicate cache */