devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Manual updates

Browse source 
Correct gramatics, missing spacing, typos, etc.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23788 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Michael Chicoine 2009-11-29 20:50:54 +00:00
parent 81a91dd46e
commit 2bfcb6e86c
8 changed files with 27 additions and 25 deletions
Download patch file Download diff file Expand all files Collapse all files

4
manual/configure_rockbox/display_options.tex
View file

@ -44,11 +44,11 @@
\opt{backlight_fade_bool}{
\item[Backlight Fade In.]
This options turns on smooth backlight fading when the backlight is
turning on. The fading time may dependent on the brightness level you
turning on. The fading time is dependent on the brightness level you
have chosen. If it is turned off, the backlight will turn on immediately.
\item[Backlight Fade Out.]
This options turns on smooth backlight fading when the backlight is
turning off. The fading time may dependent on the brightness level you
turning off. The fading time is dependent on the brightness level you
have chosen. If it is turned off, the backlight will turn off immediately.
}
\item[First Keypress Enables Backlight Only.]

12
manual/configure_rockbox/recording_settings.tex
View file

@ -51,7 +51,7 @@
22.05kHz, 16kHz, 12kHz, 11.025kHz and 8kHz}
are available. Higher sample rates use up more disk space, but give better
sound quality.
\opt{swcodec}{\note{The 11.025kHz setting is not available when using%
\opt{swcodec}{\note{The 11.025kHz setting is not available when using %
\setting{MPEG Layer 3} format.}
}%
\opt{masf}{
@ -170,11 +170,11 @@
\item[Prerecord Time.]
This specifies the time that is included into the recording before the
trigger event occurs. This is very useful if you record a signal that fades
in. Usually you want to set the prerecord time >= start duration. That
ensures that you record the entire sound. Strictly speaking the prerecord
time is not a special parameter of the trigger. It is available during normal
recordings too.
trigger event occurs. This is very useful if you record a signal that
fades in. Usually you want to set the prerecord time greater than or
equal to the start duration. That ensures that you record the entire
sound. Strictly speaking the prerecord time is not a special parameter
of the trigger. It is available during normal recordings too.
\item[Start Above.]
The start threshold defines the minimal volume a sound must have to start the

8
manual/configure_rockbox/theme_settings.tex
View file

@ -55,10 +55,10 @@ customize the visual apperance of Rockbox.
\item[While Playing Screen.]
Opens the \setting{File Browser} in the \fname{/.rockbox/wps} directory and
displays all \fname{.wps} files. Selecting one will activate it, stop will
exit back to the menu. For further information about the WPS see
\reference{ref:WPS}. For information about editing a .wps file see
\reference{ref:ConfiguringtheWPS}.
displays all \fname{.wps} files. Selecting one will activate it,
\ActionStdCancel will exit back to the menu. For further information
about the WPS see \reference{ref:WPS}. For information about editing
a .wps file see \reference{ref:ConfiguringtheWPS}.
\opt{HAVE_REMOTE_LCD}{
\item[Remote While Playing Screen.]

2
manual/getting_started/installation.tex
View file

@ -111,7 +111,7 @@ follow the instructions at
\setting{Settings $\rightarrow$ USB Mode} to \setting{MSC} from within the
original firmware.}
\nopt{SansaAMS}{\warn{Never extract files to your \dap{} while it is in recovery mode.}}
\nopt{sansaAMS}{\warn{Never extract files to your \dap{} while it is in recovery mode.}}
}
\opt{h10,h10_5gb}{
The installation requires you to use UMS mode and so

4
manual/main_menu/fmradio.tex
View file

@ -38,7 +38,7 @@
%
Long \ActionFMPrev, \ActionFMNext
\opt{HAVEREMOTEKEYMAP}{& Long \ActionRCFMPrev, Long \ActionRCFMNext}
& Seek to next station or preset in \setting{SCAN} mode.\\
& Seek to next station in \setting{SCAN} mode.\\
%
\ActionFMSettingsInc, \ActionFMSettingsDec
\opt{HAVEREMOTEKEYMAP}{
@ -101,7 +101,7 @@
\nopt{ONDIO_PAD}{\ActionFMPreset} to go to the presets list.
Use \ActionFMSettingsInc{} and \ActionFMSettingsDec{}
to move the cursor and then press \ActionStdOk{}
to select. Use \ButtonLeft{} to leave the preset without selecting
to select. Use \ButtonLeft{} to leave the preset list without selecting
anything.
\item[Removing a preset:]

8
manual/main_menu/main.tex
View file

@ -98,10 +98,10 @@ stopped or paused and there is something to resume (see \reference{ref:WPS}).
\section{Settings}
The \setting{Settings} menu allows to set or adjust many parameters that affect
the way your \dap{} works. There are many submenus for different parameter
areas. Every time you are setting a value of a parameter, and that value is
selected from a list of some predefined available values, you can press
The \setting{Settings} menu allows you to set or adjust many parameters that
affect the way your \dap{} works. There are many submenus for different
parameter areas. Every time you are setting a value of a parameter, and that
value is selected from a list of some predefined available values, you can press
\ActionStdContext, and the selection cursor will jump to the default value for
the parameter. You can then confirm or cancel the value. This is useful if you
have changed the value of the parameter from the default to some other value and

4
manual/rockbox_interface/main.tex
View file

@ -677,8 +677,8 @@ your \dap{}.
\note{Some of the themes shipped with Rockbox need additional
fonts from the fonts package, so make sure you installed them.
Also, if you downloaded additional themes from the Internet make sure you
have the needed fonts installed as otherwise the theme may get displayed
garbled.}
have the needed fonts installed as otherwise the theme may not display
properly.}
}
\opt{usb_charging}

10
manual/rockbox_interface/wps.tex
View file

@ -5,7 +5,7 @@ currently playing audio file.
%
\opt{lcd_bitmap}{%
The appearance of the WPS can be configured using WPS configuration files.
The items shown depend on your configuration -- all item can be turned on
The items shown depend on your configuration -- all items can be turned on
or off independently. Refer to \reference{ref:wps_tags} for details on how
to change the display of the WPS.
\begin{itemize}
@ -258,10 +258,12 @@ This screen is accessible from the WPS screen, and provides a detailed view of
all the identity information about the current track. This info is known as
meta data and is stored in audio file formats to keep information on artist,
album etc. To access this screen, %
\opt{PLAYER_PAD,RECORDER_PAD,IRIVER_H100_PAD,IRIVER_H300_PAD,IRIVER_H10_PAD}{
\opt{PLAYER_PAD,RECORDER_PAD,IRIVER_H100_PAD,IRIVER_H300_PAD,IRIVER_H10_PAD,%
MROBE100_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,SANSA_E200_PAD,SANSA_FUZE_PAD,%
GIGABEAT_PAD,GIGABEAT_S_PAD}{
press \ActionWpsIdThreeScreen. }%
\opt{ONDIO_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IAUDIO_X5_PAD}{press \ActionWpsContext{}
to access the \setting{WPS Context Menu} and select
\opt{ONDIO_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IAUDIO_X5_PAD,IAUDIO_M3_PAD}{press
\ActionWpsContext{} to access the \setting{WPS Context Menu} and select
\setting{Show Track Info}. }%
\opt{RECORDER_PAD,PLAYER_PAD,ONDIO_PAD}{Use \ButtonLeft\ and \ButtonRight\
to move through the information.}%