Add MPIO HD200 port - new files

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25725 a1c6a512-1295-4272-9138-f99709370657

firmware/export/config/mpiohd200.h

@@ -0,0 +1,191 @@
+/*
+ * This config file is for MPIO HD200
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 69
+
+#define MODEL_NAME   "MPIO HD200"
+
+/* define this if you use an ATA controller */
+#define CONFIG_STORAGE STORAGE_ATA
+#define HAVE_LBA48
+
+/* define this if you have recording possibility */
+/* not implemented yet 
+ * #define HAVE_RECORDING
+ */
+
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+ *  explicitly if different
+ * not implemented yet
+ */
+
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
+
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
+
+/* define the bitmask of recording sample rates
+ * not implemented yet
+ *#define REC_SAMPR_CAPS  (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
+ */
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you can flip your LCD */
+#define HAVE_LCD_FLIP
+
+/* define this if you can invert the colours on your LCD */
+#define HAVE_LCD_INVERT
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH  128
+#define LCD_HEIGHT 128
+#define LCD_DEPTH  2
+
+#define LCD_PIXELFORMAT VERTICAL_INTERLEAVED
+
+/* Display colours, for screenshots and sim (0xRRGGBB) */
+#define LCD_DARKCOLOR       0x000000
+#define LCD_BRIGHTCOLOR     0x5a915a
+#define LCD_BL_DARKCOLOR    0x000000
+#define LCD_BL_BRIGHTCOLOR  0x82b4fa
+
+#define CONFIG_KEYPAD MPIO_HD200_PAD
+
+#define AB_REPEAT_ENABLE 1
+#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+#define CONFIG_LCD LCD_TL0350A
+#define HAVE_LCD_SHUTDOWN
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+#define MIN_BRIGHTNESS_SETTING      0 
+#define MAX_BRIGHTNESS_SETTING      31
+#define DEFAULT_BRIGHTNESS_SETTING  20
+
+
+/* define this if you have a disk storage, i.e. something
+   that needs spinups and can cause skips when shaked */
+#define HAVE_DISK_STORAGE
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* FM Tuner
+ * turn off for now
+ */
+#define CONFIG_TUNER       TEA5767
+#define CONFIG_TUNER_XTAL  32768
+
+
+/* we have WM8750 codec in I2S slave mode */
+#define HAVE_WM8750
+#define CODEC_SLAVE
+
+#define BATTERY_CAPACITY_DEFAULT 950 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN    950   /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX    2250  /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC    50    /* capacity increment */
+#define BATTERY_TYPES_COUNT     1     /* only one type */
+
+#define CONFIG_CHARGING CHARGING_MONITOR
+
+/* define current usage levels */
+/* additional current when remote connected */
+/*
+#define CURRENT_REMOTE      8 
+*/
+#ifndef SIMULATOR
+
+/* Define this if your LCD can set contrast */
+#define HAVE_LCD_CONTRAST
+
+/* Define this if you have a Motorola SCF5249 */
+#define CONFIG_CPU MCF5249
+
+/* Define this if you want to use coldfire's i2c interface */
+#define CONFIG_I2C I2C_COLDFIRE
+
+/* OF resets device instead of poweroff while charging
+ * this triggers bootloader code which takes care of charging.
+ * I have feeling that powering off while charging may cause
+ * partition table corruption I am experiencing from time to time
+ */
+
+/* define this if the hardware can be powered off while charging */
+/* #define HAVE_POWEROFF_WHILE_CHARGING */
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x200000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      11289600
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+/* Offset ( in the firmware file's header ) to the file length */
+#define FIRMWARE_OFFSET_FILE_LENGTH 0
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define BOOTFILE_EXT "mpio"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define BOOTLOADER_ENTRYPOINT  0x001F0000
+#define FLASH_ENTRYPOINT       0x00001000
+#define FLASH_MAGIC            0xfbfbfbf1
+
+#endif /* SIMULATOR */
+
+/** Port-specific settings **/
+
+/* Main LCD contrast range and defaults  taken from OF*/
+#define MIN_CONTRAST_SETTING        24
+#define MAX_CONTRAST_SETTING        63
+#define DEFAULT_CONTRAST_SETTING    27 /* 0x1B */
+
+#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */